
The Tharu's horn sound when locking the vehicle requires activating a hidden system function. After enabling this feature, it can be directly turned on. Taking the Tharu 2021 280TSI Front-Wheel Drive Fashion Edition as an example: This vehicle is manufactured by SAIC , classified as a compact SUV, with a gasoline engine and a 7-speed dual-clutch transmission. The car's dimensions are 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. It features front-wheel drive, a front suspension type of MacPherson independent suspension, a rear suspension type of multi-link independent suspension, and electric power steering.

Setting the horn confirmation feature for the Tharu is actually quite simple. I've tried it myself in the car a few times. Typically, you need to start the engine, then navigate to the main menu on the central touchscreen, find the 'Settings' or 'Vehicle' option, tap into it and select 'Door Lock Settings'. There's a toggle switch for 'Enable Lock Confirmation Sound' – just check the box and save. After turning off the engine and closing the doors, press the lock button on the key fob, and the car will honk once to confirm, which is super handy when locating your parked vehicle. Paths may vary slightly for different model years – older versions might require operation via dashboard buttons. Why this setup? Primarily to avoid nighttime noise disturbances, as defaults this feature to 'off'. If it doesn't work, check whether the audio system is muted or verify the steps in the manual to ensure no settings were missed. Don't worry, it's not overly complicated.

I recommend Tiguan owners to enable the horn beep when locking the car, which can be done through the infotainment system. Sit in the driver's seat, start the ignition, use the steering wheel buttons or touchscreen to navigate to vehicle settings, enter the 'Door Locks & Keys' section, find the 'Lock Confirmation Tone' option to enable and save. This process may take a minute or two depending on the vehicle configuration. Once activated, a single beep when locking helps confirm secure locking. Why is it important? In urban parking lots, it prevents misoperation or deters thieves—subtle yet practical. Common issues like no sound after activation could indicate a faulty horn or blown fuse; if simple troubleshooting doesn't work, visit a repair shop. As a side note, avoid setting this up late at night in residential areas to prevent disturbing neighbors.

Enabling the lock beep on the Tharu is straightforward. Start the system after entering the car, navigate to the vehicle settings in the screen menu, select the door lock options, and choose 'Enable Beep' to save. The horn will sound when you lock the car by closing the door. If you're unfamiliar with the screen path, checking the user manual is the most reliable. Memorizing the steps is quick and adds a bit to safety.

The horn sound setting for the T-Roc's locking function can be easily completed through the vehicle's system. Navigate to the vehicle settings in the main menu, open the door lock options, and enable the audible alert feature. A single horn sound when locking enhances , confirming the vehicle is locked to prevent theft. Also, check other settings like whether the automatic window operation is synchronized to optimize vehicle security. The operation is similar across different model years, with slight adjustments to the screen layout, maintaining simplicity and ease of use.

I have set the horn beep function when locking the Tu Yue. You can enable it in the door lock section of the central screen vehicle settings. The operation is simple and time-saving, and the horn beep when locking is very practical after saving. Occasionally, if the horn doesn't sound when enabled, the reason may be mistakenly setting the audio to mute or a hardware issue. Check the button operation to ensure no steps are missed. Regularly test it to ensure it works properly, and adding a car-finding sound makes it much more convenient.


