Which factory produces the Jujiang Antifreeze?

1 Answers
SebastianDella
07/29/25 7:08pm
Jujiang Antifreeze is a product manufactured by Puyang Jujiang Trading Co., Ltd. Quality of Jujiang Antifreeze: Jujiang Antifreeze can withstand temperatures as low as -35 degrees Celsius and has a boiling point of 108 degrees Celsius, making it a qualified product. Adding antifreeze is an important part of car maintenance. The damage caused by counterfeit or inferior antifreeze cannot be ignored, ranging from clogging pipelines to corroding and damaging the engine block. Consumers should be cautious when selecting antifreeze. Methods to identify inferior car antifreeze: The main component of antifreeze is ethylene glycol, which is odorless. Inferior antifreeze, however, is primarily made from industrial methanol or various chemical by-products, which usually have a pungent smell and are highly volatile. The packaging of inferior antifreeze often looks attractive, but these manufacturers lack professional filling equipment. Manual filling results in poor sealing, and after transportation, traces of leakage are often found around the bottle neck.
Was this review help?
14
4
Share
More Forum Discussions

How to Check the Oil Dipstick on a Jeep Renegade?

To check the oil dipstick on a Jeep Renegade, follow these steps: Do not check the oil while the engine is running. Park the vehicle securely, engage the parking brake, and start the engine. Once the engine reaches normal operating temperature, turn it off and wait a few minutes to allow the oil to drain back into the oil pan. Then, remove the dipstick, wipe it clean, reinsert it, and remove it again to check the oil level. Taking the 2021 Jeep Renegade as an example, it features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.3L turbocharged engine that delivers a maximum horsepower of 173 PS, a maximum power of 127 kW, and a maximum torque of 270 Nm, paired with a 7-speed dual-clutch transmission.
3
5
Share

How to Check Tire Pressure in 2020 Mazda 3 Axela?

2020 Mazda 3 Axela checks tire pressure by: when the system detects one or more tires with low pressure, the low tire pressure warning light on the dashboard will illuminate, and vehicles equipped with a driver information center will display a "Check Tire Pressure" message. The dimensions of the 2020 Mazda 3 Axela are: length 4662mm, width 1797mm, height 1445mm, with a wheelbase of 2726mm. The 2020 Mazda 3 Axela features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is powered by a 1.5L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 117ps, maximum torque of 148Nm, and maximum power of 86kW, paired with a 6-speed manual transmission.
3
2
Share

How to Drive in Variable Lanes Without Violating Traffic Rules?

Methods to drive in variable lanes without violating traffic rules: 1. Check the traffic signal in advance and only enter the variable lane when the light turns green; 2. Do not cross the lane markings or overtake in the variable lane, as this may be captured by electronic surveillance; 3. Follow the indicated direction of the variable lane and do not change direction; 4. Pay attention to the permitted driving time, otherwise it will be considered a violation. Variable lanes are those with multiple diagonal lines inside the lane, resembling a lying "non" character, and can change direction based on traffic flow at any time. Variable lanes are mainly designed for sections with concentrated traffic during peak hours, insufficient lanes, or significant differences in traffic flow between morning and evening peak hours. When encountering such lanes, simply follow the direction indicated by the variable lane.
15
4
Share

Can a New Car with Paint Damage Be Licensed?

If the paint damage on a new car is not obvious, it can be licensed normally. However, if the scratches are very noticeable and affect the car's appearance, the damaged area needs to be repainted before the car can be licensed at the vehicle management office. Documents required for licensing: ID card, vehicle certificate of conformity, vehicle parameter sheet, car invoice (second and fourth copies), vehicle purchase tax, car insurance policy, purchase invoice, vehicle certificate of conformity, ID card or organization code certificate and photocopy of the invoice issuer, compulsory insurance policy, tax payment certificate, and temporary residence permit for non-locals. Licensing process: After preparing the materials, go to the vehicle management office to submit the documents, sign as the owner, have the vehicle inspected and confirmed by traffic police, choose the license plate number, receive the receipt, install the license plate, and collect the vehicle license and registration certificate.
9
3
Share

What kind of engine oil is used for the 1.5t Mondeo?

1.5t Mondeo uses 0w40 engine oil. The functions of engine oil include: lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Taking the 2020 1.5t Mondeo as an example, it is a mid-size car with a body size of: length 4873mm, width 1852mm, height 1470mm, wheelbase of 2850mm, fuel tank capacity of 62.5l, luggage compartment capacity of 516 to 986l, and a body weight of 1592kg. The 2020 1.5t Mondeo has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension, with a front-wheel drive system.
13
2
Share

How to Use the Engine Auto Start-Stop Button?

Usage of the engine auto start-stop button: Once the car is started, the engine auto start-stop system is in normal working condition. When encountering a red light or stopping for other reasons while driving, press the brake, and the engine will automatically shut off after two seconds. To start again, simply release the brake and press the accelerator or gently turn the steering wheel, at which point the engine will restart. Precautions for using auto start-stop: 1. Turn off start-stop in traffic jams: Stop-and-go traffic conditions are not suitable for auto start-stop, as repeated starts and stops not only increase fuel consumption but also add burden to the engine; 2. Turn off start-stop on slopes: When driving on steep slopes, try not to use auto start-stop, because although the auto start-stop time is very brief, the engine's start-stop on a slope may lead to insufficient brake assistance.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.