The shifting technique for FAW J6 is to shift gears timely, correctly, smoothly, and quickly. When starting the vehicle, it is generally recommended to use a low gear. Once road conditions permit, promptly shift up to higher gears in sequence. Higher gears are generally more fuel-efficient than lower ones, so it's important to upshift promptly after starting and avoid driving in a gear that's too low for the speed. More details about vehicle gears are as follows: 1. Introduction One: Generally, it is not allowed to forcibly shift into a lower gear when the vehicle is at a high speed. This should only be done in very special circumstances or when the vehicle's brakes suddenly fail and engine braking is necessary. 2. Introduction Two: First gear is used for normal starts or climbing very steep hills, with speeds typically around 10 km/h. Second gear is used for accelerating after starting or for low-speed driving, with speeds typically around 20 km/h. Third gear is used for speeds between 20-40 km/h and is commonly used for city driving. 3. Introduction Three: To engage first gear, move the gear lever to the left and then push forward. For second gear, move the lever to the left and then push down. For third gear, push the lever straight up from the neutral position. For fourth gear, push the lever straight down from the neutral position. For fifth gear, push the lever to the right and then straight up.
