Which engine oils are better for Nissan Sylphy maintenance?

1 Answers
SanLucille
07/29/25 12:16pm
For the first maintenance of Nissan Sylphy, it is recommended to use the original ordinary engine oil. Starting from the second maintenance, you can choose the appropriate engine oil according to different driving environments. If frequently used for high-speed driving, choose ordinary engine oil. If frequently used in urban areas with stop-and-go traffic, it is recommended to choose synthetic engine oil. Introduction to Sylphy: 1. Exterior: The front face adopts more curved surfaces to create an elegant shape, with a U-shaped chrome trim on the front face and boomerang-style headlights on both sides, which are the latest design language of the Nissan family. 2. Interior configuration: Equipped with the "Intelligent Mobility+" connected car system independently developed by Dongfeng Nissan, this system includes intelligent voice control, full-time in-car navigation, remote real-time monitoring, 24-hour entertainment, in-car Wi-Fi hotspot, and worry-free data usage. The top model is equipped with a 5-inch color trip computer screen, engine auto start-stop system, tire pressure monitoring, lane change assist, lane departure warning, automatic emergency braking, dual-zone automatic air conditioning. 3. Powertrain: Equipped with 1.6L/1.8L naturally aspirated engines, with maximum power outputs of 93kW (126PS) and 102kW (139PS) respectively, and peak torques of 154N·m and 174N·m. The transmission system is matched with a CVT continuously variable transmission.
Was this review help?
10
0
Share
More Forum Discussions

What is the top speed of a mountain bike?

Speed descending world record is 170+ KM/H. Here are the specific details about mountain bikes: Overview: Mountain bikes originated in 1977 when Scott, a student at the University of California, USA, modified an ordinary bicycle. They were derived from bicycles used for stunt competitions on motocross tracks and later developed into a popular sport in Europe and America. Hardware requirements: The total length of the bicycle should not exceed 185 cm, the width should not exceed 50 cm, and the weight should not be less than 6.8 kg. The saddle length should be between 24-30 cm, and the distance from the bottom bracket to the ground should be between 24-30 cm. The front and rear wheels must have the same diameter, with a maximum diameter of 70 cm and a minimum of 55 cm. The bicycle must have a fixed gear and should not be equipped with any shifting devices or brakes.
17
4
Share

Should You Release the Handbrake or Shift Gears First in an Automatic Transmission?

Generally, you should shift gears first and then release the handbrake. Here is an introduction to starting an automatic transmission car: 1. Starting in P gear: When starting in P gear, there may be a slight impact force on the parking gear. When shifting from P gear to D gear after ignition, the transmission passes through R gear, which causes a small amount of backlash force and slight damage to the transmission. 2. Recommended shifting method: First, power on, press the brake and shift to N gear, ignite, then shift to D gear to start. As long as you do not stay in R gear, the transmission will not perform a gear shift. 3. Shifting logic: Modern automatic transmissions do not rely on the gear lever to directly drive the gear shift but on the transmission control system. After receiving the gear signal, the transmission control system calculates and then makes the shifting decision.
8
4
Share

Is it allowed to turn off the engine when driving a small car down a steep slope?

It is not allowed to turn off the engine when driving a small car down a steep slope, as this operation poses significant safety hazards. Consequences of coasting with the engine off: Coasting with the engine off will result in the loss of brake assistance and engine braking force, relying solely on the friction between the brake pads and brake discs for braking. This can easily cause the brake pads to overheat, leading to a loss of braking effectiveness. Additionally, the power steering pump will also fail, resulting in the loss of steering control, creating a dangerous situation with neither steering nor braking. Correct way to descend a steep slope: When descending a steep slope, use engine braking. For manual transmission cars, shift into 1st or 2nd gear, and for automatic transmission cars, shift to L gear. At the same time, avoid pressing the brake pedal for extended periods.
15
4
Share

Can I Take Subject 4 Before Subjects 2 and 3?

You cannot take Subject 4 before Subjects 2 and 3, as you need the transcript of Subject 3 to take Subject 4. Therefore, you must take Subject 3 first. Below is some information about the test location and passing criteria for Subject 4: Introduction to Subject 4: "Subject 4" is the "Safe and Civilized Driving Knowledge Test" of Subject 3. It is the final part of Subject 3, but the test is conducted in a computer room rather than in a motor vehicle. It is taken only after passing the on-road test of Subject 3, which is why it is separately referred to as "Subject 4." Passing Criteria for Subject 4: The Subject 4 test consists of 50 questions, presented in the form of case studies, images, animations, etc. The maximum score is 100, and a score of 90 or above is required to pass.
4
0
Share

What tests are required for upgrading from C1 to B1 license?

C1 license holders who wish to upgrade to a B1 license need to take three tests, which are: Subject 1 (Road traffic safety laws, regulations, and related knowledge test); Subject 2 (Field driving skills test); Subject 3 (Road driving skills test and safe civilized driving common sense test). C1 driver's license: The C1 driver's license is one of the motor vehicle driver's license codes. The scope of the C1 license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Application age: The minimum age requirement for a C1 license is 18 years old, with no upper age limit. However, applicants over 70 years old must pass tests on memory, judgment, and reaction abilities.
18
2
Share

What is the wear limit for brake discs?

Brake disc wear is generally determined by a 5-year period or a wear limit of 1.6mm. Below are the relevant details: Brake Pads/Brake Discs: High-end vehicles usually have an alert system to indicate when brake pads need replacement. If this feature is not available, it is recommended to have the maintenance technician check them during each service. The general wear limit for brake pads is 2mm (same for front and rear brake pads). It is advisable to replace them when they wear down to approximately 2mm remaining, as failing to do so may result in longer braking distances and, in severe cases, inability to stop the vehicle. Engine Peripheral Belts: Most vehicles are equipped with peripheral belts. Regardless of the number of belts, they should be replaced every 60,000 kilometers or 4 years. When replacing the belts, the belt guide wheels and tensioners should also be replaced simultaneously. Otherwise, belt breakage or guide wheel jamming during driving may cause the wheels to malfunction.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.