···
Log in / Register

Which engine oil is suitable for Changan CS55?

4 Answers
Braxton
08/28/25 6:56am

Changan CS55 uses 5w-40 synthetic engine oil. The functions of engine oil are: 1. Lubrication to reduce wear; 2. Cooling and temperature reduction; 3. Cleaning; 4. Shock absorption and buffering. Changan CS55 is a compact SUV with body dimensions of: length 4500mm, width 1855mm, height 1690mm, wheelbase 2650mm, and fuel tank capacity of 58 liters. Changan CS55 is equipped with a 1.5T turbocharged engine, with a maximum power of 115kW at 5500rpm, maximum torque of 225Nm, and matched with a 6-speed manual transmission.

Was this review help?
15
0
Share
LaBriella
09/10/25 5:12am

Based on my experience driving the Changan CS55, the manual recommends using 5W-30 synthetic oil. Brands like Shell Fully Synthetic or Mobil 1 are very suitable as they are compatible with this SUV's 1.5T engine. In northern winters during cold starts, 5W-30 flows well and lubricates quickly, while it doesn’t thin out in summer heat. Don’t skimp and use mineral oil—it leads to carbon buildup and affects performance. I change the oil every 7,000 km or so, but if there’s frequent city traffic congestion, I do it earlier at 5,000 km. Regular maintenance can extend the engine’s lifespan by over ten years, saving on repair costs. Choose reputable oil brands to ensure quality and compatibility, and always check the vehicle manual for details to avoid wasting money on incompatible oils.

Was this review help?
7
2
Share
Expand All
RuthLynn
10/24/25 6:02am

As a technician with over 20 years of repair experience, I recommend using 5W-30 full synthetic oil for the Changan CS55. The API specification should be SN or SP grade to ensure cleanliness and anti-wear performance. The engine design suits this viscosity, providing component protection at high temperatures and smooth cold starts. Check the oil regularly and replace it if the level is too low or the oil appears too dark. Choose reliable brands like Castrol or Total for oil, and don't overlook the quality of the oil filter. A reasonable oil change interval is every 5,000 to 7,500 kilometers, depending on driving habits. Develop the habit of regularly checking the oil level by simply wiping the dipstick with a tissue to observe the color, maintaining efficient vehicle operation and reducing issues.

Was this review help?
2
5
Share
Expand All
MacAlexandra
12/07/25 6:25am

Considering environmental and climate factors, the Changan CS55 is more suitable for low-viscosity engine oil such as 5W-20 full synthetic, which saves fuel and reduces emissions. My research shows this oil performs better in hybrid mode, reducing carbon footprint. It still protects the engine in hot weather, preventing overheating and wear. Recommended brands include environmentally certified Longpan or Shell's low-carbon series, known for stable and durable performance. For daily driving, pay attention to the sustainability of the oil and combine it with green maintenance habits to extend the vehicle's lifespan. Before changing the oil, simply check the manual's recommendations to ensure compatibility, safety, reliability, and efficient handling of environmental responsibilities.

Was this review help?
16
1
Share
Expand All
More Forum Discussions

What is the difference between the Boxster and the 718?

The differences between the Boxster and the 718 are as follows: 1. Different versions: The Boxster is the previous generation, while the 718 is the successor to the Boxster. 2. Different engines: The Boxster uses a 2.7T and 3.4T 6-cylinder naturally aspirated engine, while the 718 uses a 2.0T and 2.5T 4-cylinder turbocharged engine. Additional information: The Boxster is Porsche's entry-level two-seater sports car. The name 'Boxster' is derived from the combination of 'Box' and 'ster'. 'Box' comes from 'Boxer', representing Porsche's horizontally opposed engine; 'ster' is a shorthand for 'Roadster'. 'Box' comes from 'Boxer', representing Porsche's horizontally opposed engine; 'ster' is a shorthand for 'Roadster'.
15
5
Share

How many points are deducted for running a red light in Shanghai?

According to Article 2, Paragraph 1, Subparagraph 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights results in a deduction of 6 points and a fine of 100 yuan. Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. According to Article 26 of the "Road Traffic Safety Law": Traffic signal lights consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. Article 44: Motor vehicles passing through intersections must do so in accordance with traffic signal lights, traffic signs, traffic markings, or the direction of traffic police. Here are some tips to avoid running a red light: First look at the arrow light, then the circular light: Currently, there are two types of indicator lights: arrow traffic lights and circular traffic lights. In the presence of an arrow light, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, you can turn right; when encountering an arrow signal light with a red right-turn arrow, you cannot turn right, otherwise it will be penalized as running a red light. Brake in time: When the red light turns on, do not let the front of the vehicle cross the stop line. If the front wheels accidentally cross and the rear wheels follow, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the signal turns red, do not proceed through the intersection; wait for the green light. Check the green light countdown before proceeding: When the green light is flashing, if there is a countdown, use it to judge; if there is no countdown and the vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to untimely braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians must follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may pass if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to special vehicles: Yielding to ambulances, fire trucks, or other special vehicles. If caught on camera while yielding, the violation will not be recorded during manual review. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights. The photos of the violation may be blurry, and no penalty will be given for mistakenly running a red light. Emergency situations: Transporting a critically ill patient to the hospital may involve running multiple red lights, and 12 points may not be enough. After delivering the patient, provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation record can be cleared. If possible, call an ambulance to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the gestures of the traffic police.
9
2
Share

What is the inspection method for automotive brakes?

Automotive brake inspection methods are as follows: 1. Check the connecting mechanism for deformation or looseness. 2. Under no-load conditions, the parking brake device should ensure the vehicle remains stationary for at least 5 minutes on a 20% gradient slope (with a tire-to-road friction coefficient no less than 0.7) in both forward and reverse directions. 3. With the parking brake fully engaged, the vehicle should not be able to start in second gear on level ground when unloaded. 4. Check the travel of the parking brake lever - its working travel should not exceed three-quarters of the full range. 5. Release the parking brake lever, put the transmission in neutral, lift one drive wheel, and the brake drum should be manually rotatable without friction noise.
8
3
Share

What to Do When the Car Brake Pedal Is Hard to Press?

Detailed reasons and solutions for a hard-to-press brake pedal are as follows: 1. Related to pressing the brake before engine shutdown. The car's braking system operates at its maximum efficiency when the engine is running. When the engine is off, the brake booster pump becomes ineffective, and typically, pressing the brake pedal three times will deplete its remaining vacuum. Solution: Restart the engine. Once the engine is running, the brake booster pump will resume functioning, and the brake pedal will return to normal. 2. Leakage or malfunction of the car's brake booster pump. If you haven't pressed the brake pedal after the engine is off, or if you notice the brake pedal is hard to press while driving, it is likely due to a vacuum tube leak or blockage in the brake booster pump. Solution: If this issue is noticed before driving, take the car to a repair shop immediately for inspection. If it occurs while driving, the priority is to slow down and stop the vehicle. Try pressing the pedal multiple times to see if braking can be restored.
2
5
Share

Where is the USB port in a Mercedes-Benz?

The location of the USB port varies across different Mercedes-Benz models, typically found in the center console storage compartment, the front passenger glove box, or the armrest box. Below is information on USB port locations for several Mercedes-Benz models: 1. The USB port in the Mercedes S350 is located inside the glove compartment in front of the front passenger seat. 2. The Mercedes ML500 has USB ports in two locations: one in the glove compartment and one in the center console storage compartment. 3. The USB port in the Mercedes S300 is located in the center console storage compartment and can be seen by opening the lid. Functions of the car USB port: 1. Charging mobile devices such as phones. 2. Connecting external storage devices to play music. 3. If navigation supports connectivity, it can synchronize with devices like phones or iPads.
7
3
Share

Where to Check the Tire Pressure of Buick Excelle?

Many cars are equipped with a tire pressure monitoring system, which is very practical. Tires are the only components of a car that come into contact with the ground, and they are crucial for the vehicle's driving safety and stability. Tire pressure is also extremely important for tires. The steps to check the tire pressure of the Buick Excelle are as follows: 1. Press the MENU button on the turn signal lever. 2. The small screen on the dashboard will switch to the vehicle information menu, displaying two pages: overspeed alarm and tire pressure monitoring. 3. If the overspeed alarm is displayed, rotate the knob at the top of the left lever to switch to the tire pressure monitoring information, where the tire pressure of all four wheels can be viewed.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.