···
Log in / Register

Which country's engine is used in the Trumpchi GA6?

1 Answers
LeBradley
07/25/25 1:03am

The engine of the Trumpchi GA6 is independently developed and produced by GAC Motor Co., Ltd., making it a domestically manufactured engine. The engine model of the Trumpchi GA6 is 4A15M1, with a maximum power of 124 kW, a maximum torque of 265 Nm, and a maximum horsepower of 169. For daily maintenance of the Trumpchi GA6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly replace the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts of sludge remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.

Was this review help?
17
2
Share
More Forum Discussions

How is the quality of the 5GR-FE engine?

The 2.5L 5GR-FE engine delivers a maximum power of 142KW at 6200 rpm and a maximum torque of 236NM at 4400 rpm. It is derived from the 3GR-FE by shortening the cylinder stroke to reduce displacement, and is also used in domestic models like the Reiz and Crown. Since these two engines share the same cylinder block structure and bore diameter, their differences lie only in stroke and compression ratio. Many domestic tuning enthusiasts easily upgrade the 2.5L to 3.0L by replacing the piston rods and crankshaft.
5
2
Share

Do I need to drive the car for the 4th-year inspection?

Driving the car is not required for the 4th-year inspection. Here are specific details about the inspection: 1. Period: There will be no penalty for being one day overdue. Vehicles exceeding the inspection deadline by less than one year can apply for a supplementary inspection at the vehicle management department without facing penalties. However, if the inspection is overdue by more than one year, a penalty of 3 points deduction may be imposed, and the vehicle may be temporarily impounded. 2. Penalties: Driving a motor vehicle on the road without displaying the inspection compliance label may result in the vehicle being impounded and a 1-point deduction. Failure to purchase compulsory traffic insurance will result in a penalty of twice the amount of the compulsory insurance premium.
14
0
Share

Can 750 tires be replaced with 825 tires?

Different in depth, cannot be replaced. Reasons: The diameter of the tire will increase if changed to 825, first the odometer needs to be replaced, the engine power will not keep up, the required torque will increase, which also affects the vehicle structure. It will not pass the vehicle inspection. The most basic requirement for tire upgrade is that the tire diameter is equal or similar (cannot be higher than the original by 1%, cannot be lower than the original by 2%). The original tire diameter is 750mm, and you want to replace it with 825mm, (825-750)/825=9%, so it has far exceeded the diameter requirement. Tire upgrade has nothing to do with the rim diameter, but is related to the total diameter.
10
3
Share

Why Does the 718 Hold Its Value So Well?

Porsche 718's average resale value retention rates over the first five years are: 67.7%, 60.9%, 52.6%, 46.4%, and 43.6% respectively; ranking 20th in resale value among sports cars. The Porsche 718's resale value retention rate serves as a crucial indicator for consumers to assess cost-effectiveness before purchasing. The so-called resale value retention rate refers to the ratio of a vehicle's selling price after a period of use to its original purchase price. It depends on multiple factors including the car's performance, price fluctuation range, reliability, spare parts pricing, and maintenance convenience, reflecting the comprehensive quality of an automobile.
16
1
Share

Is the Glaze Sealing Offered by 4S Stores Worth Doing?

4S stores' complimentary glaze sealing can be done, but it's unnecessary for new cars. Here are the relevant details about glaze sealing: 1. Definition: It refers to the process of using soft wool or a sponge with a high-speed vibrating polisher to forcefully penetrate glaze molecules into the gaps of the car's surface and paint, leveraging the glaze's unique permeability and adhesion. 2. Effects: After glaze sealing, the car's paint surface can achieve or even surpass the original paint effect, making older cars look newer and new cars shinier. It also provides features such as heat resistance, sealing, oxidation resistance, enhanced gloss, wash durability, and corrosion resistance, laying a foundation for future car detailing, painting, and refurbishment.
6
3
Share

How many cubic meters can a 6.8-meter vehicle hold?

30-40 cubic meters. A 6.8-meter truck compartment is also called a 5-ton truck or a 4.5-ton truck, referring to a freight vehicle with a compartment length of 6.8 meters. Due to varying transportation needs, the compartment dimensions, volume, and load capacity of a 6.8-meter truck or 5-ton truck may differ. Common specifications for a 6.8-meter truck are: 6.8 meters long × 2.4 meters wide × 2.6 meters high, with a load volume (capacity) of approximately 30-40 cubic meters, and a load capacity of 5-10 tons.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.