Which country does GMC belong to?

2 Answers
MacMargaret
07/28/25 11:14pm
GMC is an American vehicle brand under General Motors, specializing in commercial vehicles. Taking the GMC SAVANA as an example, its dimensions are: length 5715 mm, width 2098 mm, height 2530 mm, with a wheelbase of 3429 mm, a fuel tank capacity of 117 liters, and a curb weight of 3340 kg. The GMC SAVANA is equipped with a 6.0L naturally aspirated V8 engine, delivering a maximum horsepower of 328 hp and a maximum power output of 241 kW at 4600 rpm. It features a front-engine, rear-wheel-drive layout, with a front MacPherson strut independent suspension and a rear multi-link independent suspension.
Was this review help?
18
3
Share
Linda
08/12/25 3:38am
I specialize in automotive culture research, with particular expertise in American vehicles. GMC is an authentic American legacy brand, born in Detroit back in 1912. Those massive pickup trucks and luxury RVs cruising on North American highways bearing the GMC emblem are true representations of American spirit. I remember during my road trip along California's Highway 1 last year, one out of every five vehicles was a GMC SUV. Models like the YUKON full-size SUV introduced in China now drive like mobile fortresses - fuel consumption is admittedly high, but the interior space is absolutely uncompromising. Pure American pedigree through and through.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How much longer can National V vehicles be driven in Tianjin?

The notice issued by the Municipal Bureau of Ecology and Environment, the Municipal Public Security Bureau, the Municipal Transportation Commission, the Market Supervision Commission, and the Municipal Commerce Bureau regarding the implementation of the National Light-Duty Vehicle Phase VI Emission Standards states. The implementation date of the National VI emission standards in Tianjin is July 1, 2019, with Type I tests required to meet the Phase 6b emission limit requirements, directly skipping the National VIa standards. Regarding whether National V vehicles will be restricted or phased out, the situation is not as severe as it may seem. Some experts online have pointed out that if National VI standards are implemented, restrictions would likely start with National III vehicles first. Therefore, National V vehicle owners can rest assured for now. However, with future policy changes, National V vehicles may face restrictions when National VII or National VIII standards are introduced.
19
1
Share

How often should the high-pressure fuel pump be replaced?

5 years. The service life of a gasoline pump is 5 years. It mainly depends on mileage and fuel quality. Replacement is unnecessary if it doesn't affect engine performance. Below is extended information on the causes of automotive fuel pump damage: Not refueling promptly: Gasoline serves to cool and lubricate the fuel pump. Failing to refuel promptly after the fuel warning light comes on can reduce the cooling and lubrication effects, leading to fuel pump damage. Insufficient fuel pressure: When the fuel level warning light on the dashboard illuminates, the fuel pump motor may not receive adequate cooling and lubrication due to the low fuel level, causing the motor to overheat or even stop. Long-term neglect of gasoline filter replacement: Severe clogging in the fuel supply system of the gasoline filter makes pumping difficult, and prolonged high-load operation can also cause fuel pump damage. Poor fuel quality: When fuel quality is poor, impurities or foreign objects may be present in the fuel tank. Large particles are filtered out by the screen, while small particles are sucked into the fuel pump motor, accelerating wear and tear.
12
3
Share

What is the formula for automotive urea?

It is composed of 32.5% high-purity urea and 67.5% deionized water. Below is a related introduction to automotive urea: 1. Usage instructions: Automotive urea must use ultra-pure water of electronic grade. Since the SCR catalyst carrier is highly susceptible to metal ion poisoning, which can lead to loss of catalytic effect, automotive urea solution must use ultra-pure water of electronic grade (resistivity ≥18MΩ?cm). Automotive urea solution begins to freeze at -11°C, and in practical use, it completely freezes at -20°C. Current technology involves adding modifiers to lower the solution's freezing point and external heating devices to prevent the solution from freezing. 2. Advantages of automotive urea solution: Automotive urea solution is prepared by mixing high-purity urea without any additives with pure water, with a urea content of 32.5% (by mass fraction). Most domestic and international heavy-duty diesel engine manufacturers have adopted SCR (Selective Catalytic Reduction) technology to meet the requirements of Euro IV and Euro V vehicle emission standards. Vehicles using SCR technology must add urea solution as a catalytic reductant to meet emission standards.
12
3
Share

How much fuel is consumed when idling with the air conditioning on for 3 hours?

Idling with the air conditioning on for 3 hours consumes approximately 3-4.5 liters of fuel. Below is relevant information: Air conditioning: The air conditioning system mainly consists of components such as the compressor, expansion valve, condenser, evaporator, and blower. Cold air is produced by pressurizing the compressor to liquefy the refrigerant, which then vaporizes, absorbing heat from the air to achieve a cooling effect. Using air conditioning in winter: The warm air used in winter mainly comes from the engine, so it does not consume much fuel. However, summer is different; using the cold air function will definitely consume more fuel. During idling: The vehicle consumes about 2 liters of fuel per hour while idling because the engine is in an idle state with low RPM, resulting in reduced air intake efficiency. Besides fuel consumption and carbon buildup, idling also causes certain environmental pollution.
2
1
Share

Should the Clutch Be Fully Released When Going Uphill?

When going uphill, the clutch should be fully released to ensure complete engagement, allowing the vehicle to climb smoothly. If the clutch pedal is not fully released during an uphill climb, the clutch will not engage completely, leading to slippage. Slipping clutch plates can accelerate wear on the clutch. The working process of the clutch is as follows: 1. When the clutch pedal is pressed, the push rod moves the master cylinder piston, increasing hydraulic pressure; 2. The pressurized fluid travels through the hose to the slave cylinder, forcing the slave cylinder rod to push the release fork, which in turn pushes the release bearing forward; 3. When the clutch pedal is released, the hydraulic pressure is relieved; 4. The release fork gradually returns to its original position under the action of the return spring, and the clutch re-engages.
9
2
Share

What are the main components of a sedan?

A car is mainly composed of four major assemblies: the body, engine, chassis, and electrical equipment. It is the power unit of the car. Its function is to burn fuel to generate power, which then drives the wheels through the chassis's transmission system, enabling the car to move. There are two types of engines: gasoline engines and diesel engines. A gasoline engine consists of the crankshaft-connecting rod mechanism, valve train, fuel supply system, cooling system, lubrication system, ignition system, and starting system. Diesel engines use compression ignition, so they do not have an ignition system. The chassis serves to support and mount the car's engine and its components and assemblies, forming the overall shape of the car. It receives power from the engine, enabling the car to move and ensuring normal operation. The chassis consists of four parts: the transmission system, driving system, steering system, and braking system. The body is mounted on the chassis frame and provides space for the driver and passengers or for carrying goods. The electrical equipment consists of the power source and electrical devices. This includes the power battery and generator. Electrical devices include the engine starting system, gasoline engine ignition system, and other electrical equipment.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.