Which Cars Do Not Use Asphalt Damping Sheets?

1 Answers
DiEzra
07/25/25 2:52am
Cars that do not use asphalt damping sheets include Volvo models. Asphalt damping sheets refer to damping sheets made from asphalt as the raw material. As a viscoelastic material, they are adhered to the steel panels of the car body to reduce noise and vibration. Volvo models include: Volvo XC40, Volvo XC90, Volvo S90, Volvo New S60, Volvo XC60, among others. Taking the Volvo XC60 as an example, its body dimensions are: length 4688 mm, width 1902 mm, height 1658 mm, with a wheelbase of 2865 mm, and a trunk capacity ranging from 483 to 1410 liters.
Was this review help?
19
3
Share
More Forum Discussions

Where is the cabin air filter of the Senova D50 located?

The cabin air filter of the BAIC Senova D50 is located in the front part of the vehicle, beneath the drainage channel in front of the passenger seat. Here are some details about the cabin air filter: 1. Maintenance cycle: For the cabin air filter, the replacement cycle is twice a year, specifically once in spring and once in autumn; the cleaning cycle is once a year, preferably performed in spring. 2. Function: Its function is to filter smoke odors, pollen, dust, harmful gases, and various odors. While purifying the air, it can effectively remove organic gases such as TVOC, benzene, phenol, ammonia, formaldehyde, and xylene.
14
4
Share

What are the consequences of not displaying the annual inspection sticker?

Motor vehicles must display not only the annual inspection compliance sticker but also the environmental protection sticker and insurance sticker in the upper right corner of the front windshield. The consequences of not displaying the annual inspection sticker are: 1. If the annual inspection sticker is damaged or not displayed, the vehicle is not allowed to be driven on the road during that period. 2. Otherwise, according to regulations, a fine of 50 yuan and 1 point deducted from the driver's license will be imposed. Relevant information about vehicle annual inspection is as follows: 1. Vehicle annual inspection: It is a mandatory test for every vehicle that has obtained an official license plate and registration certificate, conducted annually in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." 2. Purpose: Vehicle annual inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
11
3
Share

What are the effects of a faulty EGR valve?

If the EGR valve is faulty, it will be unable to control the amount of exhaust gas recirculation, leading to issues such as engine oil burning. Here is some information about the EGR valve: 1. Hazards: Excessive exhaust gas participating in recirculation will affect the concentration of the air-fuel mixture. The car may experience difficulties starting, engine shaking, unstable idle, lack of acceleration power, and other phenomena, which can impact engine performance. 2. Faults: It affects the normal operation of the engine, especially during idling, low-speed small-load conditions, high-speed operation, rapid acceleration, rapid deceleration, and when the engine is running cold. Excessive recirculated exhaust gas can severely impact engine performance, leading to unstable idle, poor acceleration, increased fuel consumption, insufficient power, and other faults.
17
3
Share

Where is the car's bumper located?

Automobile bumpers are divided into front and rear bumpers. The front bumper is a crossbeam located between the two fog lights below the grille, while the rear bumper is a crossbeam situated below the rear lights. Here is some information about automobile bumpers: 1. Installation Function: Bumpers are installed at the front and rear ends of a car, not only for decorative purposes but more importantly as safety devices that absorb and mitigate external impacts, protecting the vehicle body and the safety of passengers. 2. Composition Materials: The outer panel and cushioning materials are made of plastic, and the crossbeam is formed by stamping cold-rolled steel sheets about 1.5 mm thick into a U-shaped channel. The outer panel and cushioning materials are attached to the crossbeam, which is connected to the frame longitudinal beams with screws and can be disassembled at any time.
17
0
Share

Will there be any problem if the car is left unused for a week?

Leaving a car unused for a week generally has no significant impact on the vehicle. However, for electric vehicles, if the battery hasn't been replaced for a long time, leaving it unused for a week may cause the battery to drain, making it impossible to start the engine. Issues to pay attention to when leaving a car unused for a week: 1. Tire pressure: First, check the tire pressure of the car. If the pressure is too low, it should be replenished. If the tire pressure is too low, during high-speed driving, the deflated tire may deform in a wavy pattern, and the friction between rubber molecules generating heat can lead to a tire blowout, increasing the risk of a rollover. 2. Check the engine lubrication system: A decrease in lubricating oil can lead to poor engine lubrication, thereby damaging engine components such as gears. 3. Parking location: The parking location of the vehicle is crucial. If conditions don't permit, try to find a cool, ventilated place to park, preferably not under trees or near buildings. During windy or rainy weather, branches, leaves, or falling objects from above can land on the car body and cause damage.
9
4
Share

How to Step on the Gas Pedal for Beginners?

Beginners should avoid stepping on the gas pedal all the way down. Even under good road conditions, gently press the gas pedal first and then steadily increase the pressure. Avoid uneven force when stepping on the gas pedal—don’t press lightly one moment and heavily the next. Keep the pressure steady with the sole of your foot. Do not step on the gas pedal when going downhill; instead, keep your foot on the brake, ready to brake at any time. Below are some precautions for stepping on the gas pedal: 1. Test the gas pedal first: Each car has different performance characteristics, and the sensitivity of the gas pedal varies. Test the gas pedal first when driving a new car. After getting the car, gently press the gas pedal and gradually shift gears while observing the speed. If the car accelerates slowly and the speed doesn’t increase easily, the gas pedal may be heavier, requiring a gradual increase in pressure. Use the sole of your foot to feel the pressure when stepping on the gas pedal, placing the entire sole on it. Therefore, whether you press lightly or firmly, the toes and heel won’t accurately sense the pressure point—only the sole can feel the intensity. 2. Press the gas pedal lightly before reaching the critical point: When starting the car, lightly press the gas pedal before reaching the critical point after releasing the clutch. Giving a little gas helps prevent the car from stalling.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.