Where to Turn On Bluetooth in BMW 3 Series?

1 Answers
VeraFitz
07/30/25 5:27am
BMW 3 Series Bluetooth function can be selected at the control panel. The following is an introduction to car Bluetooth: 1. Introduction: Car Bluetooth technology is a global specification for wireless data and voice communication, based on low-cost short-range wireless connection, providing a special short-range wireless technology connection for fixed and mobile devices to establish a communication environment. 2. Function: The function of car Bluetooth is to automatically identify mobile phones, enabling connection with the phone without the need for cables or phone holders. The owner can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can make calls through the car's audio system. 3. Convenience: Car Bluetooth technology is integrated with the car's audio system. When in use, a Bluetooth-enabled phone pairs with the car's audio system, allowing the owner to automatically switch the audio sound during incoming calls and restore the sound after hanging up.
Was this review help?
11
4
Share
More Forum Discussions

Has the Phaeton been discontinued?

The Phaeton was discontinued in 2016. Reasons for the discontinuation of the Phaeton: 1. Low production volume and poor sales. Due to high technical requirements, production was limited, and low sales led to massive losses. The profit per vehicle was negative at €28,100 (approximately ¥205,000 RMB), with a loss rate as high as 40%. Since its mass production in 2002, the Phaeton alone caused a cumulative loss of €2 billion (approximately ¥14.59 billion RMB) for the Volkswagen Group. 2. Poor sales and severe losses resulted in slow updates, with the model being sold for 13 years. Moreover, competitors like the Mercedes-Benz S-Class, BMW 7 Series, and Audi A8L had superior performance, making the Phaeton less competitive in its class. 3. Impacted by Volkswagen's 'Dieselgate' scandal and the resulting massive fines. 4. Ferdinand Piëch, former Chairman of the Volkswagen Group Supervisory Board, resigned from his position.
18
3
Share

What is the Scrap Life of Automotive Gas Cylinders?

For liquefied petroleum gas (LPG) cylinders with a designed service life of 8 years, an extension of the service period is permitted after a safety assessment, but only once, and the extension must not exceed one inspection cycle of the cylinder. For LPG cylinders without a specified designed service life, those that have been in use for 15 years should be scrapped and rendered unusable. Below are the relevant details: 1. Automotive LPG cylinders: Inspect every 5 years, with the first periodic inspection date calculated from the manufacturing date. 2. Automotive dimethyl ether (DME) cylinders: Inspect every 5 years, with the first periodic inspection date generally calculated from the installation supervision inspection date. 3. Automotive fiber-wrapped gas cylinders: Inspect every 3 years, with the first periodic inspection date generally calculated from the installation supervision inspection date. 4. Automotive compressed natural gas (CNG) cylinders: The first and second periodic inspections are conducted every 3 years, and after the second inspection, inspections are conducted every 2 years. For taxi cylinders, the first periodic inspection is conducted every 2 years, and the second inspection is valid for 1 year. The first periodic inspection date is generally calculated from the installation supervision inspection date. 5. Automotive welded insulated gas cylinders: Inspect every 3 years, with the first periodic inspection date generally calculated from the installation supervision inspection date.
13
4
Share

Where to Obtain the Environmental Label?

The steps to obtain the environmental label are as follows: 1. Vehicle owners can directly bring the original vehicle license and the original vehicle registration certificate to the nearest motor vehicle environmental inspection agency to apply for free. The specific procedure is: the applicant submits the required documents at the designated window, after which the issuing personnel will review and approve the application. The classification label will then be issued and printed by the issuing personnel, who will also fill out the issuance registration form. Finally, the applicant can collect the label and retrieve the original valid documents. 2. For in-use motor vehicles, the owner needs to drive the vehicle and bring the original vehicle license to the inspection station. The applicant must fill out the 'Motor Vehicle Environmental Classification Label Technical Identification Application and Review Form' (which can be downloaded and printed from the municipal environmental protection bureau's website), submit the aforementioned valid documents, and after the vehicle passes the technical identification review, the environmental classification label can be obtained.
15
1
Share

Where is the VIN number located on the Highlander?

The VIN number of the Highlander is located under the front passenger seat. Here is some information about the Highlander: 1. The Highlander is a mid-size SUV under the Toyota brand, featuring a MacPherson independent front suspension and an E-type multi-link independent rear suspension. 2. The new Highlander is equipped with a 2.0-liter turbocharged engine, delivering 220 horsepower and a maximum torque of 350 Nm. The engine reaches its maximum power at 5,200 to 5,600 rpm and its peak torque at 1,800 to 4,000 rpm. 3. This engine incorporates VVT-iW technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission.
15
3
Share

How to Open the Rear Seat Window?

Method for opening the rear seat window: The window can be opened using the electric window adjustment button on the rear door. Passengers simply need to press this button to open the window. Below are specific details about car windows: 1. Introduction: Car windows are an essential part of the vehicle body, meeting the needs for interior lighting, ventilation, and visibility for drivers and passengers. 2. Classification: Car windows are typically divided into four types: front and rear windshields, ventilation windows, heat-insulating side windows, and sunroofs. 3. Glass Composition: Based on manufacturing processes, they are classified into four categories: A-type and B-type laminated glass, zone-tempered glass, and tempered glass.
8
4
Share

What does it mean to inspect ESC?

The dashboard prompt 'Please inspect ESC' indicates a malfunction in the vehicle's Electronic Stability Control system. To resolve the issue, it is necessary to use a diagnostic tool to read the fault codes of the Electronic Stability Control system. It is advisable for the owner to promptly visit a 4S shop for inspection. Here is an introduction about inspecting ESC: 1. Composition: ESC mainly consists of three major components: sensors, actuators, and the Electronic Control Unit (ECU). Under normal driving conditions, the ESC system does not activate. 2. Function: It helps the car to be more stable and safe when changing lanes or taking turns.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.