···
Log in / Register

Where to Set the Auto Hold Function in Haval Big Dog?

6Answers
LeJohnny
08/30/2025, 10:16:56 PM

Haval Big Dog's auto hold function is set in the lower right corner of the instrument panel. Below is a detailed introduction to the auto hold function: 1. Advantages: (1) Prevents rolling: In situations requiring short stops, such as at traffic lights, the system automatically brakes the wheels after the vehicle comes to a complete stop to prevent rolling. When starting on an uphill slope, the system automatically brakes to prevent rolling back, and releases the wheels to move forward directly after starting. (2) Auto-lock: When parking and locking, there's no need to pull the handbrake as the system automatically brakes the wheels, but this feature is only available in some models. 2. Disadvantages: (1) Unable to lift the brake: If the auto hold function remains enabled during reversing, the vehicle cannot be controlled to move slowly by lifting the brake. Poor throttle control may lead to accidents. (2) Jerky sensation: Early versions of the auto hold function may cause a noticeable jerky sensation during use, resulting in a poor experience.

Was this review help?
108
Share
AngelaMarie
09/12/2025, 01:50:06 AM

When I first bought the Haval Big Dog, I was also puzzled about where to set the auto hold function. Later, I found it quite simple through personal experience. The button is located in the center console area near the gear shift, specifically next to the electronic parking button or on the lower right side of the steering wheel, labeled with HOLD or AUTOHOLD. After starting the vehicle, just press it to activate with a light on, which is very convenient. It automatically maintains braking when stopping, so you don’t have to keep your foot on the brake at red lights, especially useful in city traffic jams—saving effort and worry. The position varies slightly with different models; for example, the Premium version might have the option in the central control screen settings menu. If you manually flip through the owner's manual illustrations, it’s even clearer. After setting it up, pay attention to whether the function is effective, ensuring smooth starts and high safety. Beginners might want to try it a few times to get familiar with it, ensuring no interference during normal driving. I occasionally turn it off when driving on highways, but for daily commutes, it’s definitely a must-have feature.

Was this review help?
1
Share
Expand All
SiennaLee
10/26/2025, 02:40:36 AM

After two years of using my Haval Big Dog, I've memorized the auto-hold setting point. Looking at the central control area near the driver's seat, you'll find a prominent round button or square key marked with 'HOLD' letters, located directly below or beside the gear shift lever. After starting the engine, press the button – the illuminated light indicates activation while turning it off is as simple as pressing again. The operation is intuitive and quick. When activated, it automatically engages the brakes when stopping, allowing you to drive off directly by pressing the accelerator without delay. It's particularly useful in city traffic jams, relieving right foot pressure and protecting the brake system. Note that button positions may vary by model: luxury versions have it near the steering wheel, while basic models fix it on the central console. For first-time users, it's recommended to turn on interior lights for better visibility or refer to in-car diagrams. Long-term users should regularly check the function to avoid safety risks caused by wiring issues. A few simple steps make it time-saving and efficient.

Was this review help?
11
Share
Expand All
DiCameron
12/09/2025, 02:00:37 AM

From a technical perspective, the automatic parking setting position of the Haval Big Dog is typically located on the driver-side center console panel, integrated with the EPB system. The button is marked with a HOLD icon, and pressing it activates the function for convenient operation. The feature uses sensors to detect when the vehicle is stationary, automatically maintaining brake pressure without manual intervention, thereby enhancing comfort and safety. The setting can be toggled via a direct physical button or through the vehicle's infotainment menu. Some versions require the function to be enabled in the driving assistance section of the central display system settings after startup. The principle is based on ESP controlling brake pressure to reduce the risk of errors. Enabling this feature in urban areas with frequent traffic lights saves effort. The button position is fixed, making it easy for beginners to use. Regular maintenance checks ensure the function operates correctly, preventing electronic faults that could affect the driving experience.

Was this review help?
18
Share
Expand All
McAriel
01/29/2026, 03:09:23 AM

I love the auto hold feature in my Haval Big Dog because it's convenient and safe. The setting is located on a small button next to the gear shift lever on the left side of the center console, labeled 'HOLD'. Press it once to activate when the light turns on. When in use, the system automatically maintains the brake state after the vehicle comes to a complete stop. To start, simply press the accelerator to release without any additional operation, saving leg effort, which is especially handy for city driving. The button is designed to be within easy reach, eliminating the need to search for it. Before activating, ensure the engine is running and check for dashboard prompts for reliability. Regularly check the function's normal operation; if it malfunctions, inspect the fuse or switch contact. It's recommended to use it in combination with the air recirculation for enhanced comfort. The fixed position minimizes accidental activation, making it an essential feature for safe driving that even beginners can easily master.

Was this review help?
6
Share
Expand All
DeIvan
04/24/2026, 02:34:24 PM

Locating the automatic parking setting for the Haval Big Dog is straightforward. The button is situated in the central control area of the driver's seat, specifically near the gear shift lever or to the right of the steering wheel, marked with the 'HOLD' label. After starting the vehicle, press the button—when the light illuminates, it indicates activation. The system automatically maintains braking when stopped, releasing immediately upon pressing the accelerator, designed with user-friendliness in mind. Its intuitive placement requires no technical expertise, making it accessible even for older users. The button's location is consistent across different models, clearly labeled for easy reach. Note that pre-start settings are ineffective; wait for the dashboard to confirm the function is active. A quick test ensures normal operation, enhancing convenience and safety in city driving—just maintain adequate distance from vehicles ahead and behind for smooth starts. The manual includes illustrated guides for easy reference.

Was this review help?
2
Share
Expand All
More Q&A

What causes uneven paint spray with a stuttering pattern from the spray gun?

Reasons for uneven paint spray with a stuttering pattern from the spray gun: 1. The air vent hole on the gun cup lid is blocked, or the air cap and suction tube are severely clogged. 2. There is no paint in the cup. 3. The needle stroke is too small. Solutions: 1. Clean the air vent hole on the cup lid, the air cap, and the suction tube. 2. Refill the paint. 3. Rotate the paint flow adjustment knob to increase the needle valve stroke. Important parameters for automatic spray guns: 1. Air pressure: The spraying air pressure is generally (0.4--0.6Mpa). 2. Spray width: The width of the spray on the working surface is about 10cm. 3. Spraying distance: The distance between the gun nozzle and the object being sprayed is 15--20cm. 4. Moving speed: The moving speed of the spray gun is generally 30--60cm/second.
112
Share

What Causes the Mazda 6 to Have Poor Acceleration Without Fault Codes?

Mazda 6's poor acceleration is caused by excessive carbon buildup in the throttle body, among other factors. Engine Carbon Buildup: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. Ignition System: Issues with the ignition system—check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark plug firing can also lead to such symptoms. Inspect the spark plugs for excessive carbon buildup and replace them if necessary. Unstable Fuel Pressure: Abnormal fuel pump supply pressure or incorrect readings and poor performance of the intake pressure sensor can cause vehicle shaking. Check the fuel pressure and replace components if needed.
115
Share

Why can't the Ora Black Cat start?

If the smart key is not placed at the bottom of the induction slot, it may cause startup failure or even prevent the car from starting at all. Here is some knowledge about the Ora Black Cat: Definition: The Ora Black Cat is a new energy vehicle built on the ME platform, China's first dedicated electric vehicle platform developed by Great Wall Motors. The design of the Ora Black Cat was led by international aesthetics master Nakajima Keishin. Appearance: In terms of appearance, the Ora Black Cat adopts minimalist design elements, featuring LED daytime running lights and integrated door handles. The front face features a design with dual round lights and a closed front grille, with the lower air intake and LED daytime running lights also incorporating rounded rectangular elements. The rear of the car continues the front's rounded and cute shape while maintaining a sense of layering.
120
Share

What are the differences between the Vision and the Emgrand?

The differences between the Vision and the Emgrand lie in their body dimensions: the Vision measures 4599mm in length, 1747mm in width, and 1482mm in height, with a wheelbase of 2615mm; while the Emgrand measures 4632mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm. Both the Vision and the Emgrand are equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kW and a maximum torque of 142Nm, paired with a 5-speed manual transmission. Both models feature a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
117
Share

Is the Honda Lingpai equipped with a three-cylinder engine?

Honda Lingpai is equipped with a three-cylinder engine. The Lingpai is a compact sedan launched by Honda, powered by a 1.0T three-cylinder turbocharged engine. This engine delivers a maximum power of 90 kW and a maximum torque of 173 Nm, paired with either a CVT continuously variable transmission or a 6-speed manual transmission. The dimensions of the Honda Lingpai are 4664mm in length, 1750mm in width, and 1505mm in height, with a wheelbase of 2650mm. In terms of exterior design, the car features a family-style design with pronounced waistline contours on the sides, enhancing its visual appeal. The rear adopts a fastback-style design, and the dual waistlines on the sides further accentuate the car's sporty character.
107
Share

Where does the hole at the base of the wiper lead to?

The hole at the base of the wiper leads to the outside of the car. It primarily serves as a drainage channel to remove accumulated water during rain. If the vehicle is frequently parked outdoors, leaves, dirt, and other debris can accumulate in the drainage pipe. Excessive debris may clog the drainage hole, leading to water leakage into the car. Therefore, it is essential to clean these obstructions regularly during maintenance to ensure the drainage channel remains clear. Below is more information about wipers: 1. Wipers are devices designed to remove raindrops and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. 2. The power source of the wiper comes from an electric motor, which is the core of the entire wiper system. The wiper motor uses a DC permanent magnet motor and is typically integrated with the worm gear mechanism installed on the front windshield. 3. The worm gear mechanism functions to reduce speed and increase torque. Its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into a left-right oscillating motion.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.