Where to Handle the Annual Review of Driver's License?

3 Answers
SanOscar
07/29/25 2:07pm
Driver's license annual inspection should be processed at the Vehicle Management Office. Below is the relevant introduction: 1. Driver's license: The full name of the driver's license is the motor vehicle driver's license, also known as "driver's license," which is the certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive arbitrarily. Generally, individuals cannot drive on the road without a license. 2. Notes: It is best to handle the renewal 3 months in advance and not wait until the driver's license expires. If delayed for too long, driving will not be allowed once it expires. Before renewing the license, it is advisable to check if there are any outstanding traffic violations. If there are, they should be resolved before renewal. For renewing the driver's license in a different location, a residence permit is required. Therefore, those without a residence permit should return to their original location for renewal or apply for a residence permit at least one year in advance.
Was this review help?
12
4
Share
DeLandon
08/13/25 6:03am
I just renewed my driver's license last year at the local vehicle management office. They have dedicated windows for license processing, and the staff were very helpful. The basic procedure is simple: just bring your original ID card and driver's license, fill out a form, and you're good to go. However, it's advisable to avoid peak hours like weekends or the end of the month to reduce waiting time. If online services are available in your area, you can also consider using the 12123 APP to make an appointment or complete the renewal directly online, which can save a lot of hassle. This time, it only took me half an hour to get it done, and the efficiency was quite high. Regular maintenance of your driver's license is important to avoid trouble if checked on the road. The processing locations are usually the vehicle management offices of local public security authorities or designated points by the traffic police brigade. Specific addresses can be found updated on the local traffic management website or APP.
Was this review help?
3
2
Share
Expand All
SanBeau
10/10/25 7:17am
When it comes to driver's license annual review, I have to remind you to check local policies. Usually, you can handle it at the traffic police service hall or authorized vehicle inspection stations. Don't forget to bring photos and copies. I usually choose a location close to home to save time and effort. It's best to check in advance if the APP offers online review functions - apps like 12123 are quite handy, allowing you to upload materials and complete the process with just a few clicks. Don't overlook material expiration issues; sometimes it's wise to process it one month before the license expires to avoid last-minute troubles. The entire process takes at most two hours, and you'll feel much more at ease once completed. Personally, I recommend prioritizing online processing - it's smarter with less legwork.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What is the appropriate tire pressure for a compact SUV?

The recommended tire pressure for a compact SUV is between 2.2 and 2.5 bar. Driving with insufficient tire pressure can lead to noticeable increases in fuel consumption. This is because low tire pressure increases the contact area between the tires and the road surface, resulting in greater friction and higher driving resistance, which in turn raises fuel consumption. Additionally, inadequate tire pressure accelerates tire wear, shortening the tire's lifespan. Therefore, maintaining proper tire pressure is crucial for driving safety, tire longevity, and optimal performance. This is especially important for long-distance or high-speed driving, so always check your tire pressure thoroughly before setting off.
10
2
Share

What is the wading depth of the H9?

The maximum wading depth of the Haval H9 is 700mm. The wading depth of the Haval H9 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the vehicle's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low ground clearance, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Haval H9 is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to waterlogging, observe warning water level markers, trees, or reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the height of the engine's air intake, do not proceed. Instead, choose an alternative route.
19
1
Share

What does TPMS mean when it appears on the car dashboard?

The appearance of TPMS on the car dashboard indicates a fault in the Tire Pressure Monitoring System, signaling that one of the tires has low pressure. Tire pressure monitoring is divided into direct and indirect types. If the TPMS warning light comes on while driving, it may indicate that one of the tires has low pressure. In such a case, the driver should avoid sharp steering and emergency braking, reduce speed, and slowly pull over to the side of the road to check the tire pressure. If the vehicle has simple tools, the driver can measure the tire pressure and inflate the tire themselves. If not, they should seek a nearby repair shop for inflation. However, if the light is on but the tires are not the issue, it may indicate an abnormality with the tire pressure sensor.
13
0
Share

Where to Find the Engine Model of Mazda 8?

Mazda 8's engine model can be found on the front rotor cylinder block near the oil dipstick by the front windshield. This vehicle is equipped with two engine options: a 2.3L MZR turbocharged engine and a 2.3L MZR inline 4-cylinder naturally aspirated engine, with maximum power output of 120kW and maximum torque of 209Nm. The Mazda 8 is a 7-seater MPV with dimensions of 4868mm in length, 1850mm in width, and 1685mm in height, featuring a wheelbase of 2950mm. The new Mazda 8 is positioned as a mid-to-high-end luxury MPV, equipped with features such as power seats, 4 SRS airbags, 5-speed automatic transmission, cruise control system, and TCS system.
3
3
Share

How to Determine if the Engine PCV Valve is Damaged?

Methods to determine if the engine PCV valve is damaged: 1. Check if there is blue smoke coming from the exhaust pipe. A damaged PCV valve can cause the car to burn oil, resulting in severe blue smoke from the exhaust. 2. Due to the PCV valve failure causing oil burning, the oil will also be consumed quickly, leading to increased oil consumption. 3. Open the oil filler cap. If there is strong suction (meaning the cap is pulled in), it indicates a problem with the PCV valve. Reasons for PCV valve damage: 1. Poor quality of the PCV valve itself. 2. Improper maintenance. 3. Poor fuel quality. 4. Aging of the PCV valve. The PCV valve operates under high engine temperatures and may degrade over time.
11
5
Share

Is it necessary to install a license plate frame for a new car?

It is necessary to install a license plate frame for a new car, as it can prevent the car body from being scratched by the license plate. Installing a license plate frame can also reduce the possibility of theft, making it quite practical in terms of functionality. A license plate, commonly known as a car plate, is a panel hung separately at the front and rear of the car. The materials typically used include aluminum, iron, plastic, or paper, with the car's registration number, registration region, or other relevant information engraved on it. The license plate serves as a numbering and information registration system for vehicles. Its primary function is to identify the region to which the vehicle belongs through the license plate, and it also allows tracking the vehicle's owner and registration information based on the plate.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.