···
Log in / Register

Where to Deal with Car Scratches?

5 Answers
OFinley
07/24/25 7:47pm

When dealing with car scratches, the method and location for treatment should be chosen based on the severity of the scratch. Below is a detailed introduction and solutions: 1. Light scratches: For light scratches, all you need is a tube of toothpaste. Toothpaste is highly effective for shallow scratches that haven't damaged the car's primer. It can especially remove traces left by other vehicles' paint during minor collisions or sticky residues from adhesive products, cleaning most of them thoroughly. 2. Moderate to deep scratches: Moderate and deep scratches cannot be repaired by polishing. For small dents not exceeding 5mm, they can be leveled with filler putty before repainting. 3. Deep scratches: Such damage is usually difficult to repair perfectly on your own and requires professional treatment at a 4S shop or quick repair shop. In such cases, metalworking is needed followed by repainting.

Was this review help?
3
2
Share
AlanaLee
08/10/25 9:08am

Last time I got a small scratch on my car and it really hurt. Actually, the treatment location depends on the depth of the scratch. For minor ones like surface marks, you can go to a car detailing shop for a simple polish, which costs just a few dozen yuan. For deeper scratches that expose the primer, you should go to a professional repair shop or a 4S store for painting, which costs between a few hundred to a thousand yuan. It's recommended to choose reputable places for guaranteed quality and precise color matching with the original paint. Usually, try to park away from tight spots to reduce the risk of scratches. During regular maintenance, ask the mechanic to check for you to prevent rust from spreading. In short, don't delay too long, as the longer you wait, the more money and time it may cost. Finding a place isn't hard; just search online for highly-rated local options.

Was this review help?
8
1
Share
Expand All
DeHadley
09/26/25 4:16am

I usually handle minor scratches myself to save money and hassle. Buying a scratch repair kit online only costs a few dozen yuan. After cleaning the scratch, just apply the repair paste and polish it a bit. For deeper scratches, you can lightly sand them with sandpaper first and then apply paint. If you don't have time or the necessary tools, just ask at a nearby small auto repair shop—they have professional equipment and can get it done in half an hour. Just be careful not to be too rough to avoid worsening the damage, and choose a color close to the original to prevent it from looking worse. I've tried it myself and found it quite practical—solving a big problem with little money. Drive carefully daily and leave space when parking to reduce such incidents.

Was this review help?
19
3
Share
Expand All
AlexanderLynn
11/09/25 6:18am

When encountering car scratches, I usually first assess whether to file an insurance claim. If the scratch is severe or related to an accident, I go to a repair shop and follow the insurance company's procedures, providing photos and a description of the situation. For minor scratches, I pay out of pocket and visit a 4S shop or quick repair shop, where the cost can range from one to two hundred yuan depending on the car model. The key is to act promptly and not wait until rust worsens, as this can double the repair cost. During regular car washes, I inspect the body to prevent issues. Finding a repair shop is easy—just search nearby options on a mobile map and choose one with good reviews and high efficiency.

Was this review help?
12
0
Share
Expand All
AmyLee
12/30/25 8:05am

I usually ask friends for recommendations on where to get things fixed. Last time my car got a small scratch, a buddy recommended a local auto care shop. They polished it out in half an hour for just a few dozen bucks—great value. Nowadays, with so much information available, you can also check online forums or social platforms where people share experiences about good local shops. For minor scratches like those from tree branches, using toothpaste or a scratch repair pen can be a quick fix. But deeper scratches need professional attention to avoid damaging the paint. In short, choose where to go based on the severity of the scratch, compare prices and services, and don’t just follow blindly. Also, park away from roadside obstacles—developing good habits helps avoid headaches.

Was this review help?
7
5
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Warning on the New Lavida?

Steps to reset the tire pressure warning on the new Lavida: 1. Press the MENU button on the turn signal lever, navigate to the tire pressure display option in the mileage/fuel information menu, then press the Set and CIr buttons; 2. The driver information center will display "Tire Pressure Relearn," select "Yes," then press the Set and Clr buttons, and the horn will sound twice; 3. The driver information center will display "Tire Pressure Learn Enabled"; 4. At this point, the left front turn indicator will stay lit, increase or decrease the left front tire pressure to 8.3 kPa, and the horn will sound to stop the pressure adjustment; 5. Next, the right front turn indicator will stay lit, followed by the right rear and left rear indicators in sequence, repeat the pressure adjustment for the remaining three tires; 6. Once all four tires are adjusted, the turn indicators will stay lit for 3 seconds, and the horn will sound twice, indicating the completion of the tire pressure learning process. The new Lavida is a compact sedan under the Volkswagen brand, featuring a 4-door, 5-seat configuration with dimensions of 4670mm, 1806mm, 1474mm, and a wheelbase of 2688mm.
13
4
Share

What engine does the BYD M6 use?

The engine of the BYD M6 is a domestically produced engine, manufactured by Shenyang Aerospace Mitsubishi Automobile Engine Manufacturing Co., Ltd. The 2.0L version of the BYD M6 uses the BYD483QB engine model, with a maximum power of 103 kW and a maximum torque of 186 Nm; The 2.4L version uses the 4G69 engine model, with a maximum power of 118 kW and a maximum torque of 215 Nm. For daily maintenance of the BYD M6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, the oil should be changed regularly according to usage conditions, with an appropriate oil level maintained; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
8
5
Share

Which one is the air recirculation mode, a or m?

Both a and m represent air recirculation modes, where m stands for manual air recirculation and a for automatic air recirculation. If the air quality outside the vehicle is poor with severe pollution, the a mode will automatically select air recirculation. Choosing between air recirculation and fresh air mode: Consider road conditions: On highways, it's advisable to use the fresh air mode. Firstly, due to wind resistance and high speed, opening windows is not suitable. Prolonged use of air recirculation can lead to brain hypoxia, impairing reaction and judgment, which is highly dangerous. Secondly, the air quality on highways is generally good with low exhaust concentration, making fresh air mode a suitable choice. In urban areas, especially during congested traffic or peak hours when vehicle exhaust concentration is high, it's best to switch to air recirculation. Consider vehicle condition: New cars typically contain higher concentrations of toxic gases like formaldehyde. Therefore, for the first three to six months after purchasing a new car, it's recommended to use the fresh air mode along with opening windows to enhance air circulation and dilute the concentration of toxic gases inside the car. Function of fresh air mode: The fresh air mode ventilates the car interior, expelling stale, oxygen-depleted air and bringing in fresh air. In winter, if the heater is on, remember to switch to fresh air mode to avoid dizziness and chest tightness. Function of air recirculation mode: Air recirculation helps maintain a constant temperature inside the car. In winter, it keeps the interior warm, and in summer, it retains the cool air. However, prolonged use of air recirculation can lead to an increase in carbon dioxide exhaled by passengers, resulting in stale air. Therefore, it's good practice to switch to fresh air mode every hour to refresh the air. Air recirculation prevents the entry of external pollutants. Activating air recirculation closes the airflow channel, stopping external air from entering. When the fan is off, there's no airflow, and when it's on, it circulates the air inside the car. This effectively blocks external pollutants from entering the vehicle. For instance, during sandstorms, smog, congested roads, or construction zones, air recirculation should be activated to prevent pollutants from entering the car.
20
1
Share

What are the benefits of applying film to a car's front windshield?

The benefits of applying film to a car's front windshield include blocking ultraviolet rays, reducing heat, preventing injuries from shattered glass, and minimizing glare. Additionally, it helps protect interior items and occupants from UV damage and lowers the cabin temperature through physical reflection. Car window film is a thin layer applied to the front and rear windshields, side windows, and sunroof, also known as solar film or heat-insulating film. According to regulations, the front windshield's light transmittance must exceed 70% to ensure driving safety.
20
2
Share

What does portal axle chassis mean?

Portal axle chassis is a type of axle chassis, which is only used in hardcore off-road vehicles. The front and rear suspensions of hardcore off-road vehicles are solid axles, not independent suspensions. The axle of a solid axle suspension is a complete shaft, unlike independent suspensions where the middle is disconnected. Solid axle suspensions offer poor comfort but strong off-road capability. In addition to solid axle suspensions, hardcore off-road vehicles also use body-on-frame construction, which completely separates the body shell from the chassis. Body-on-frame construction provides better torsional resistance and can handle more extreme road conditions.
19
1
Share

What Needs to Be Done During the First Car Maintenance?

During the first car maintenance, the following tasks should be performed: 1. Oil change: Due to insufficient wear-in between various components during the break-in period, debris can easily mix with the oil, leading to impurities that reduce lubrication effectiveness, necessitating an oil change during the first maintenance; 2. Replace the three filters: The three filters in a car include the oil filter, fuel filter, and air filter, which provide a clean environment for the engine's operation and prevent contaminants from entering the engine; 3. Check if the coolant level meets the specified requirements: Car coolant not only cools the engine but also prevents freezing during winter use.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.