Where to Check the Average Fuel Consumption of Geely Xingyue?

Can a Car Specified for 95 Octane Use 92 Octane Gasoline?

You should refuel according to the specified requirements. Occasionally using the wrong gasoline octane rating only requires switching back to the correct octane rating after consumption. However, prolonged use of the wrong octane rating can have the following effects: For vehicles recommended for lower octane ratings, using a higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance in practice. For vehicles recommended for higher octane ratings, using a lower octane gasoline can cause engine knocking. Because the octane value is significantly lower, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If the fuel combusts before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If it's mild knocking, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. Besides checking the appropriate gasoline octane rating in the car's manual, you can also find it on the fuel tank cap, which usually specifies the required octane. Typically, the gasoline octane rating can also be determined based on the engine's compression ratio. Cars with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the octane rating can no longer be solely determined by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline because factors like ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane.

10

3

Share

How Much Does a Repainted Car Depreciate in Value?

Car repainting can depreciate the value by 10-15%. Below is relevant information about depreciation due to repainting:1. Depreciation range: Generally, a repainted car will have a price difference of 10-15% compared to one with original factory paint. If the repainting job is poor, the difference may be even higher. If the repainting was due to accident-related bodywork, the depreciation could be even more significant. Repainting any part of the car will cause depreciation, and the exact value should be assessed based on the actual condition of the vehicle's paint.2. Depends on the repair area: The larger the repainted area, the higher the depreciation rate. For new cars, repainted areas due to bodywork often suffer from subpar craftsmanship. Even if the paint initially appears identical to the factory finish, it is prone to oxidation and discoloration over time—for example, white paint may turn yellow. This not only affects the car's aesthetics but also leads to further depreciation.3. Difference between factory paint and repaint: Factory paint and repaint differ significantly in application methods. Modern factory paint achieves consistent indicators such as viscosity, resulting in high-quality finishes. Repaints, on the other hand, are manually applied in inferior environments. The biggest difference is that repaints lack an electrophoretic layer, consisting only of a base color layer and clear coat. This leads to issues like color mismatch and severe paint aging over time.

6

0

Share

Why is the Changan Benben E-Star out of stock?

The Changan Benben E-Star is currently out of stock due to high demand. Below are the detailed specifications of the Benben E-Star: 1. Vehicle Positioning: The Benben E-Star is a microcar under Changan Automobile, with dimensions of 3770*1650*1570mm (L*W*H). 2. Features: It comes standard with electronic parking brake, tire pressure monitoring, dual front airbags, ABS+EBD, hill start assist, rear parking radar, remote start function, adjustable multifunction steering wheel, 10.25-inch full LCD instrument cluster, 10.25-inch central touchscreen, LED headlights with high/low beam, delayed headlight shut-off, front center armrest, and split-folding rear seats. 3. Powertrain: Equipped with a permanent magnet synchronous motor delivering a maximum power of 55kW and peak torque of 170N·m. Under NEDC test conditions, it offers a range of 301km, with real-world testing achieving 320km. The 0-50km/h acceleration time is just 4.7 seconds.

19

3

Share

How Often Should a Car's Air Conditioning System Be Recharged with Refrigerant?

This requires the owner's judgment and observation. It's not advisable to recharge the refrigerant simply because the car's air conditioning cooling performance has declined, as there could be other reasons for the reduced cooling efficiency. Essentially, every car experiences minor leaks to some extent, but the severity varies. Generally, if a new car's air conditioning has been functioning well for several years with regular cleaning and maintenance, but the cooling effect has diminished, it's recommended to first inspect the air conditioning system before adding refrigerant. Below is more related information on how to determine if a recharge is needed: Methods to Determine if Refrigerant Recharge is Necessary: 1. Check the sight glass on the receiver-drier to assess if refrigerant needs to be added. During normal operation of the air conditioning, if bubbles continue to appear in the sight glass, it indicates a lack of refrigerant and the need for a recharge. If there are numerous bubbles in the sight glass, it signifies a severe shortage of refrigerant, necessitating a leak check, repair of the leaking component, and then a proper recharge. 2. There are two methods to recharge a car's air conditioning system with refrigerant: high-pressure side charging or low-pressure side charging. These methods are not the same. High-pressure side charging involves adding liquid refrigerant, characterized by safety and speed, and is suitable for the initial charge of the refrigeration system—specifically after leak detection and vacuum evacuation. Note that this method must be performed with the compressor off and the engine stopped, and the refrigerant cylinder must be inverted.

13

3

Share

The Difference Between Volkswagen 330TSI and 380TSI

The differences between Volkswagen 330TSI and 380TSI are as follows: In summary, the main differences between Volkswagen 330TSI and 380TSI lie in the maximum power and torque of the two engines. The 380TSI has higher torque and belongs to a higher vehicle class. The xxTSI naming convention is a distinctive feature of Volkswagen, where the numbers represent the torque value in Newton-meters, and TSI stands for the engine technology type. The 330TSI model is equipped with a low-power 2.0T engine codenamed EA888. This engine has a maximum power of 137kW, a maximum torque of 320 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1600 to 4000 rpm. This engine features hybrid injection technology and uses an aluminum cylinder head. The 380TSI model is equipped with a high-power 2.0T engine also codenamed EA888. This engine has a maximum power of 162kW, a maximum torque of 350 Nm, a maximum power speed ranging from 4500 to 6200 rpm, and a maximum torque speed ranging from 1500 to 4400 rpm. This engine features direct fuel injection technology and also uses an aluminum cylinder head. The injection technologies of the 330TSI and 380TSI engines differ. The 380TSI employs both direct fuel injection and intake manifold injection technologies, while the 330TSI only uses direct fuel injection. The intake manifold injection technology effectively removes carbon deposits on the valves. Additionally, the 380TSI is equipped with an integrated load cylinder head, which the 330TSI lacks. Volkswagen's rear badges come in five variants: 180, 230, 280, 330, and 380, corresponding to engine displacements of 1.6L, 1.4T, 1.8T, 2.0T, and 2.0T, respectively. The 'L' denotes a naturally aspirated engine, while 'T' signifies a turbocharged engine.

7

2

Share

How to Issue a Car Repair Invoice?

Repair fees should be issued as a regular invoice. According to current tax regulations, a value-added tax (VAT) special invoice or a unified invoice for the repair and maintenance industry can be issued.

20

5

Share

Where to Check the Average Fuel Consumption of Geely Xingyue?

Can a Car Specified for 95 Octane Use 92 Octane Gasoline?

How Much Does a Repainted Car Depreciate in Value?

Why is the Changan Benben E-Star out of stock?

How Often Should a Car's Air Conditioning System Be Recharged with Refrigerant?

The Difference Between Volkswagen 330TSI and 380TSI

How to Issue a Car Repair Invoice?

What time does the Xinjiang Subject 1 morning session start?

What Causes Loud Noise in Car Air Conditioning Compressors?

Where is the engine serial number located on a BMW X5?

Do I Need a Photo for the Subject 4 License?