···
Log in / Register

Where to Check Remaining Points on Traffic Management 12123?

6Answers
AnnaLynn
07/29/2025, 08:19:47 PM

You can view your scores after scheduling exams on Traffic Management 12123. Here is some information about the point deduction system for learning traffic laws: 1. Purpose: While the system ostensibly provides more behavioral points to drivers, its primary goal is to encourage drivers who have been penalized to participate in legal education, thereby promoting legal awareness. 2. Notes: If you accumulate 12 penalty points, your driver's license will be suspended, and you must attend a 7-day course on traffic regulations at the location of the violation within 15 days and pass the exam. Additionally, if you accumulate 12 points in the current scoring cycle, you will not be eligible to participate in the point deduction program in the next cycle.

Was this review help?
119
Share
Asher
08/16/2025, 12:42:22 AM

You can check your remaining points by opening the Traffic Management 12123 APP. After logging into your account, you can usually see your driver's license point information on the homepage, or just click on the 'My Driver's License' tab, and the number will be displayed there directly. You have a total of 12 points, and if you lose them all, you'll have to retake the driving test. Drive carefully in daily life—avoid speeding or illegal parking, as these behaviors easily lead to point deductions. I make it a habit to check every two weeks. The APP also allows you to view violation records and handle fines, which is quite convenient. If your points are running low, quickly correct your driving habits—don’t wait until you’re fined or your license is suspended to regret it. Safe driving comes first, and managing your points helps you save both trouble and money.

Was this review help?
8
Share
Expand All
VanAthena
10/19/2025, 03:21:08 AM

To check your remaining driving license points, go to the Traffic Management 12123 APP. After downloading and logging in, navigate to the 'Services' or 'Driving License Management' section, where your points are usually prominently displayed. The total score is 12 points—don't underestimate minor deductions, as a single violation can deduct 3 to 6 points, directly affecting your travel. I recommend checking regularly, especially after long trips or violations. The APP is user-friendly, with detailed records showing the reasons for point deductions. Remember to drive safely to avoid violations, ensuring you have enough points and stay safe. If you're unsure about the steps, you can always consult customer service.

Was this review help?
19
Share
Expand All
Zane
12/02/2025, 03:00:58 AM

Checking points on the Traffic Management 12123 APP is quick. Just log in to your account and click the 'Driver's License' option to see your remaining points. Don't take the 12-point total lightly—I once had 6 points deducted and only then realized the severity. Follow traffic rules while driving, such as avoiding drunk driving or running red lights, and the APP will promptly update any point deductions. Stay vigilant by checking regularly to keep your points from decreasing.

Was this review help?
7
Share
Expand All
LeNevaeh
01/22/2026, 09:32:16 PM

Checking your points is a breeze in the 'Driver's License' section of the 12123 Traffic Management APP. After logging in, the numbers are clearly displayed. The total score is 12 points, and if it drops to 0, your license will be revoked. Pay attention to details in daily driving, such as fastening your seatbelt and not using your phone, to avoid point deductions. The APP also provides a violation reminder feature, which I always use to monitor and ensure safety. Regular checks are key to prevention.

Was this review help?
17
Share
Expand All
LeKaylee
04/18/2026, 04:05:51 AM

Checking points on the Traffic Management 12123 APP is simple. After logging into your account, locate 'My Driver's License' and click to view your remaining points. Remember, the total is 12 points, and violations can start with deductions of 2 points. I often remind myself to check my points status before driving—the app updates quickly and is reliable. Maintaining safe driving habits is key to avoiding unnecessary trouble.

Was this review help?
2
Share
Expand All
More Q&A

How to Connect Bluetooth in the 10th Generation Accord?

10th Generation Accord Bluetooth connection method is: 1. Turn on the mobile phone Bluetooth and set it to visible status; 2. Start the vehicle while simultaneously pressing the two volume buttons on the left front A-pillar of the car; 3. When a beeping sound is heard inside the car, release the volume buttons, then use the mobile phone Bluetooth to search for the HONADTF device; 4. After finding the device, enter the default password 0000 to complete the connection. The 10th Generation Accord is a mid-size car under GAC Honda, with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. The vehicle adopts a high-strength transmission belt to achieve a wide gear ratio, providing efficient transportation. Through G-Design Shift control technology, it quickly responds to the driver's demands.
106
Share

How to Clear the Maintenance Reminder on Geely Boyue?

To clear the maintenance reminder on the Geely Boyue, follow these steps: 1. Start the vehicle directly; 2. Press the button on top of the left-hand light lever on the steering wheel until the trip interface is displayed on the instrument panel; 3. Press the mode button to enter the setup menu; 4. Locate the reset maintenance mileage menu; 5. Press the mode button and select to clear it. The Geely Boyue is a compact 5-door, 5-seat SUV with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. It is equipped with a 1.8T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 120 kW and a maximum torque of 250 Nm.
102
Share

What is the maximum power of the Honda Odyssey engine?

The maximum power of the Honda Odyssey engine is 107 kW, with a maximum power speed of 6200 rpm, a maximum torque of 175 Nm, and a maximum torque speed of 3500 rpm. It is equipped with a 2.0L naturally aspirated engine and an ECVT continuously variable transmission. The Honda Odyssey is a mid-size 5-door 7-seater MPV with body dimensions of 4847mm in length, 1820mm in width, 1702mm in height, and a wheelbase of 2900mm. It features front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
102
Share

Why Does the Car Window Roll Down by Itself?

The reason why the car window rolls down by itself is: the rubber guide channel of the window glass may cause the window glass to rise slowly or stop at a certain position due to rubber aging or dust accumulation. If the window has an anti-pinch function, it will automatically descend when reaching a certain position. The solutions for a car window that won't roll up are: 1. Check if the window control switch is damaged; 2. Remove and clean the window channel or rubber seal, then lubricate it; 3. Replace the window channel with a new one. The maintenance methods for car window regulators are: 1. Keep the windows clean regularly; 2. If the oil in the regulator is depleted, remove the inner cover and add oil; 3. Spray oil on the window gears and apply a maintenance agent to the rubber parts.
104
Share

What is the standard tire pressure for the Highlander?

The normal tire pressure range for the Highlander is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. Some Highlander models are equipped with a tire pressure display function. By selecting the menu on the steering wheel, navigating to the instant fuel consumption display, and pressing the directional key downward, the tire pressure will be shown. The tire pressure monitoring system is a type of active safety device that can alert the driver in time when there are signs of danger in the tires, prompting them to take appropriate measures to avoid serious accidents. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, lowering driving comfort; accelerates wear on the central tread pattern, reducing tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases the friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies the friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure. Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to come on. Simply resetting the tire pressure will resolve this issue. Damaged tire pressure sensor. The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.
103
Share

Is a Tire Pressure of 208 Normal?

A tire pressure reading of 208 is not within the normal range. According to the international standard GBT2978-2008, the recommended tire pressure for standard tires is between 2.4-2.5 bar. A pressure of 2.0 bar is below the minimum recommended value, making it abnormal. Hazards of Low Tire Pressure: Increased friction with the road surface, leading to higher fuel consumption; causes heavy steering and potential misalignment, which are factors detrimental to driving safety; increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; reduces the functionality of the cords and rubber, potentially causing delamination or cord breakage, and excessive friction with the rim, resulting in damage to the bead area and abnormal wear. Hazards of High Tire Pressure: Reduced tire friction and adhesion, negatively impacting braking performance; causes steering wheel vibration and misalignment, reducing driving comfort; accelerates localized wear of the tread pattern in the center of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the longevity of other components.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.