Where to Add Windshield Washer Fluid for the Car?

2 Answers
LeGenesis
09/01/25 7:01am
Automotive windshield washer fluid is generally stored in the front engine compartment. Details are as follows: Specific location: The storage location for automotive windshield washer fluid is typically in the front engine compartment. Open the engine compartment cover and locate the washer fluid reservoir. Generally, the reservoir cap will have an indicator-like symbol. After opening the cap, you can add the windshield washer fluid. Functions of windshield washer fluid: Cleaning performance: Windshield washer fluid is formulated with various surfactants and additives. Surfactants usually have functions such as wetting, penetrating, and solubilizing, thereby achieving cleaning and stain removal effects. Antifreeze performance: It significantly lowers the freezing point of the liquid, providing antifreeze effects and quickly dissolving frost. Anti-fog performance: It forms a single-molecule protective layer on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear field of vision. Anti-static performance: After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate static charges on the glass, providing anti-static properties.
Was this review help?
3
4
Share
StAurora
09/14/25 2:49am
I've been driving for years, and adding windshield washer fluid may seem like a small task, but its location is crucial. It's located in the engine compartment, usually a blue plastic reservoir with a windshield washer icon or labeled 'Washer Fluid.' Finding it is simple—just pop the hood, and you'll typically spot it near the base of the windshield, close to the washer nozzles. Be careful not to pour it into the wrong place, like the engine coolant or oil filler, as that could cause serious issues. I recommend adding it when the engine is cold—just unscrew the cap and slowly pour in the fluid, preferably an all-season, antifreeze type to prevent freezing in winter. Check the fluid level to avoid overfilling, which could lead to spills and component corrosion. Regular top-ups ensure clear visibility and safer driving. If you can't locate it, refer to your owner's manual—it has clear diagrams to guide you.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Does the Jetta VS5 tire pressure monitoring need to be turned on?

Jetta VS5 tire pressure monitoring does not need to be turned on, as it is automatically calculated and operated by the computer. As long as the tire pressure is abnormal and exceeds the standard, the tire pressure warning light will automatically illuminate. Taking the 2020 Jetta VS5 as an example, its body dimensions are: 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 482 liters. The 2020 Jetta VS5 features a McPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 250 Nm, paired with a 6-speed automatic transmission.
11
0
Share

Can I pick up the car in full payment without being present?

It is not necessary for the buyer to be present when picking up a fully paid car, as there is no specific procedure for car pickup. Therefore, the 4S dealership does not require the user to be present when delivering the new car. When entrusting someone else to pick up the car on your behalf, you need to provide them with your original ID card and all the necessary documents required for the car purchase. Visually inspect the car body paint: Check for any scratches or wear on the paint. Observe under sufficient sunlight to see if there is any color difference in the paint. Open the car door and push or pull it from several angles to let light shine from different directions to check if the sheet metal is even. Check the vehicle identification plate: The car's identification plate is located on the side of the driver's seat door or inside the engine compartment. Pay attention to the manufacturing date of the vehicle; generally, if it exceeds half a year, it can be considered as stock inventory. Check each piece of glass: Also check the production date of each tire to ensure that no replacements have been made after the vehicle left the factory. Check if the tire tread hairs are present and if there are any obvious signs of wear. Inspect the engine compartment: Check if the engine compartment is clean. If the vehicle has been stored for a long time or has been used, there may be noticeable dust or stains in certain areas.
1
1
Share

How to Check if the Battery is Good or Bad?

Check if the battery is good or bad by following these methods: 1. Observe the inspection window—green indicates sufficient charge, black means slightly discharged, and white indicates the battery is dead and needs replacement; 2. Use a battery tester or multimeter to measure the battery voltage. Normally, the no-load voltage should be around 13V, the load voltage should not drop below 12V, and the starting voltage should not be lower than 9.5V; 3. Check if there is noticeable swelling, deformation, or bulging on both sides of the battery; 4. Look for any white or green powdery substances around the battery terminals, which are signs of oxidation. High-quality or new batteries usually do not develop these oxides easily. If they appear, it means the battery's performance is starting to deteriorate.
19
5
Share

What is the reason why the Jaguar XEL sunroof cannot be closed with one touch?

The reasons why the Jaguar XEL sunroof cannot be closed with one touch are: 1. Lack of lubrication in the sunroof track, causing the sunroof seal to stick to the body; 2. Foreign objects in the sunroof slot; 3. Damage to the sunroof motor. The functions of the sunroof are: 1. Releasing toxic gases inside the vehicle; 2. Preventing car exhaust fumes; 3. Reducing the interior temperature; 4. Effectively reducing wind noise; 5. Eliminating fog. Taking the 2020 Jaguar XEL as an example, it belongs to the mid-size car category, with body dimensions of: length 4778mm, width 1850mm, height 1429mm, a wheelbase of 2935mm, a fuel tank capacity of 62 liters, and a curb weight of 1730kg.
10
5
Share

What are the differences between the Lynk & Co 02 Yao Edition and Jin Edition?

The differences between the Lynk & Co 02 Yao Edition and Jin Edition lie in the seat materials: the Yao Edition features genuine leather seats, while the Jin Edition combines genuine leather with suede material. Both the Yao Edition and Jin Edition share the same 5-door, 5-seat SUV body structure, with identical dimensions: length 4448mm, width 1890mm, height 1528mm, and a wheelbase of 2702mm. Both models are equipped with MacPherson independent front suspension and multi-link independent rear suspension. They are powered by a 1.5L turbocharged engine, delivering a maximum horsepower of 180PS, maximum power of 132kW, and maximum torque of 265Nm.
5
3
Share

How to Avoid Shifting from Third Gear to First Gear by Mistake

Before shifting gears, first return the gear lever to neutral, then engage the corresponding gear. Here are some additional tips: 1. When parking normally with an automatic transmission, shift into P (Park). Most automatic transmissions follow the gear sequence "P, R, N, D". You should first shift from P to N (Neutral), then start the engine, release the handbrake, shift into D (Drive), and press the accelerator to drive forward normally. 2. If you start the engine directly and then shift from P through multiple gears to D in one motion, it will frequently cause impact damage to transmission components.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.