Where to Add Water to the BYD L3 Radiator?

Where is the BMW oil dipstick?

BMW does not have a mechanical oil dipstick. To check the oil level, you need to use the electronic oil dipstick in the iDrive multimedia system or find the oil level option on the instrument panel. BMW's car brands include: BMW 1 Series, BMW 3 Series, BMW 5 Series New Energy, BMW 5 Series, and BMW 2 Series Tourer. Taking the BMW 1 Series 2021 120i M Sport as an example: this is a compact 4-door 5-seater sedan with a length, width, and height of 4462mm, 1803mm, and 1446mm respectively, a wheelbase of 2670mm, a fuel tank capacity of 50 liters, a front suspension using MacPherson independent suspension, and a rear suspension using multi-link independent suspension.

13

2

Share

How to Replace the Battery of a Besturn B30 Car Key?

The method to replace the battery of a Besturn B30 car key is: 1. There is a round button on the side of the car key. Press this button with one hand and pull out the mechanical key with the other hand; 2. Locate the gap in the middle of the top of the key and insert a flat-head screwdriver; 3. Pry the key up and down until a gap is created; 4. Take out the key circuit board, gently push one side of the battery with your finger, and remove the battery; 5. Install the new battery with the positive side facing up. Taking the Besturn B30 2019 1.6L Automatic Comfort model as an example: The length, width, and height of this car are 4625mm, 1790mm, and 1500mm respectively, with a wheelbase of 2630mm, a fuel tank capacity of 50 liters, a trunk capacity of 480 liters, and a curb weight of 1270kg.

3

0

Share

How to Fix a Volkswagen Sharan Sunroof That Won't Close?

The solutions for a Volkswagen Sharan sunroof that won't close are: 1. Check for any debris blocking the mechanism and clean it thoroughly; 2. Apply lubricant to the sunroof tracks; 3. If the sunroof seal strip is lifted or displaced, spray a small amount of plastic protectant or talcum powder on the sealing components. Taking the 2018 280TSI Enjoy 7-seater model as an example: The Sharan is a 5-door, 7-seat MPV with dimensions of 4854mm in length, 1904mm in width, and 1740mm in height, and a wheelbase of 2920mm. This vehicle is equipped with a 1.4T inline 4-cylinder engine and a 6-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front MacPherson strut independent suspension and a rear multi-link independent suspension.

3

0

Share

What is the real fuel consumption of the Emgrand S?

The comprehensive fuel consumption of the Emgrand S is 5.9L/100km. Currently, there are 4 models of the Emgrand S available for sale: CVT Flagship, CVT Luxury, CVT Premium, and Manual Comfort, all with a comprehensive fuel consumption of 5.9L/100km. The above figures are NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 6.0-7.6L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, early braking: When driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during driving, making the car more fuel-efficient. By anticipating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Regular oil changes can reduce carbon deposits (carbon deposits can cause poor ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires); regular checks and timely replacement of dirty air filters, cleaning or replacement of fuel injectors, spark plugs, and throttle bodies at specified mileage intervals. Close windows while driving. Driving with windows open increases wind resistance, and greater wind resistance means more resistance for the car, requiring more power and thus increasing fuel consumption.

11

1

Share

Is driving a new car at 160 km/h harmful?

Generally, driving a new car at 160 km/h won't cause significant damage, but it's recommended to avoid sudden acceleration before the first maintenance. After the first maintenance, you may consider doing a high-speed run. The break-in period for a new car typically ranges from 1,000 to 3,000 kilometers, during which it's advisable not to drive too fast—keeping the speed between 50-90 km/h is ideal. Warm up before starting: After starting the engine, you can begin driving as long as it maintains a stable idle. Before the engine reaches normal operating temperature, moderate your speed. Once the engine is warmed up, you can drive normally. During the break-in period, avoid hard acceleration and sudden braking. Avoid high-speed driving: New cars have speed limits during the initial driving phase. For domestic cars, the limit is usually between 40-70 km/h; for imported cars, it's generally within the first 1,000 kilometers, with the speed not exceeding 80% of the maximum speed at full throttle. It's also important to monitor the engine RPM and speed gauges to ensure both are operating within moderate ranges.

4

3

Share

What can be used to remove adhesive from car wraps?

You can use a hairdryer, wet towel, and carburetor cleaner to remove adhesive from car wraps. Using a hairdryer: Blow the hairdryer hard until it becomes hot to the touch, then immediately apply even force to peel off the car wrap. The remaining adhesive can be sprayed with tar remover, left for a while, and then wiped clean with a wet cloth. It's very easy. Wet towel: First, use a wet towel to moisten and soften the paper on the car wrap, then rub it off. For the remaining adhesive, apply essential balm, alcohol, or hand cream, and it will come off with a wipe. This is very effective for adhesive marks. Carburetor cleaner: For glass that already has a film, never use regular cleaners as some chemical agents may damage the film. In this case, use a towel dipped in a small amount of carburetor cleaner (such as alcohol or diesel) to repeatedly wipe the area with the adhesive, but never spray the carburetor cleaner directly on the glass, as it could damage the film. It's important to note that these are all flammable items, so be cautious of open flames during use.

17

2

Share

Where to Add Water to the BYD L3 Radiator?

Where is the BMW oil dipstick?

How to Replace the Battery of a Besturn B30 Car Key?

How to Fix a Volkswagen Sharan Sunroof That Won't Close?

What is the real fuel consumption of the Emgrand S?

Is driving a new car at 160 km/h harmful?

What can be used to remove adhesive from car wraps?

Is the Jetour X90 compliant with China 6 emission standards?

What Causes Shaking During Hill Start?

What to Do If the Headlights of Changan Oushang Are Too Dim?

What are the reasons why a sedan won't start?