Where to add water in Kangrui K1?

1 Answers
BrodyFitz
07/30/25 7:31am
Kangrui K1's water tank filler location is in the engine compartment. Open the hood, locate the reservoir tank, and fill it directly to the appropriate level. The water in the tank usually refers to coolant: The water in a car's radiator typically refers to radiator-specific water or coolant, which functions to cool the running engine through circulation. Only radiator-specific water or qualified coolant should be added to the radiator. If the level is low, tap water can be used to supplement the level temporarily, but it cannot completely replace the proper fluid. Service life of specialized water: Radiator-specific water or coolant provides antifreeze protection, which tap water cannot achieve. The water in the radiator has a service life of 2 years and should be replaced after this period. When purchasing radiator-specific water or coolant, it is advisable to choose products from reputable brands to ensure quality.
Was this review help?
8
1
Share
More Forum Discussions

At what angle does parking a car on a slope damage the vehicle?

Parking a car on a slope for an extended period can cause damage regardless of the angle. Below are the issues that may arise from long-term inclined parking: 1. Tires: When climbing a curb, the sidewalls of the tires may rub against the curb, leading to damage. In severe cases, the internal cords may break, causing bulges on the tire sidewalls. 2. Component damage: Due to the vehicle's center of gravity shifting toward the lower side, the tires, control arm bushings, ball joints, and shock absorber springs on both sides experience uneven long-term stress. Components on one side are prone to premature wear or fatigue deformation, resulting in issues like body vibrations while driving. 3. Body misalignment: When the vehicle is parked on a slope, the center of gravity of components like doors shifts, making it difficult to open or close doors and the trunk. This can also lead to malfunctions in the door lock mechanisms.
3
5
Share

Why does the engine sound loud when the car's air conditioning is on?

Car engine sound loud when the air conditioning is on may be due to wear of the clutch bearing inside the air conditioning pump. The following is an extended introduction about cars: 1. Car definition: (1) Passenger car. It is mainly designed and technically characterized for carrying passengers and their personal belongings and/or temporary items, including the driver's seat, with a maximum of no more than 9 seats. (2) Commercial vehicle. It is designed and technically characterized for transporting people and goods, and can tow trailers, but passenger cars are not included. 2. Function: The latest national standard of China "Terms and Definitions of Automobiles and Trailers" (GB/T-3730.1—2001) defines automobiles as follows: Non-track vehicles with four or more wheels driven by power. Mainly used for: transporting people and/or goods, towing vehicles for transporting people and/or goods, and other special purposes.
7
3
Share

Why Can't the Trunk of Emgrand GS Open?

The reasons why the trunk of Emgrand GS cannot open: 1. The key is out of battery; 2. The trunk door is blocked or stuck; 3. There is a circuit malfunction. It is better to go to a 4S shop for inspection. The body dimensions of Emgrand GS are 4440mm in length, 1833mm in width, and 1560mm in height, with a wheelbase of 2700mm. The interior of this car adopts a red and black contrasting color design across the entire series, and the sporty changes in the seat style are also very noticeable. Additionally, piano lacquer elements are added to the dashboard in front of the co-pilot for decoration, creating a striking visual effect. In terms of power, Emgrand GS offers two options: 1.4T and 1.5T, with maximum power outputs of 141kw and 177kw respectively, and peak torques of 235nm and 255nm respectively.
17
3
Share

What Are the Reasons for High Fuel Consumption in Trucks?

The reasons for high fuel consumption in trucks are as follows: 1. Insufficient air supply from the turbocharger system: Turbocharger internal leakage, loose intercooler pipe clamps, exhaust manifold gasket and intercooler leaks. The engine runs normally at idle but emits black smoke during rapid acceleration. At high RPMs, the typical turbocharger whistling sound is absent. Pressure gauge measurements show below 2 bars, requiring turbocharger replacement. 2. Abnormal fuel supply system: Worn plungers inside the fuel pump cause insufficient working pressure. Internal wear of injectors or partial clogging of injection holes leads to poor atomization. Black smoke and eye irritation occur during both idle and rapid acceleration. Engine temperature runs high during operation. 3. Abnormal valve train system: Due to thermal expansion, engine components expand as temperature rises during operation. If clearances are too small, thermal expansion of valves and their components (valve lifters, camshaft, etc.) in hot conditions causes improper valve sealing, resulting in engine leakage and power loss.
19
0
Share

Can a Zhejiang A license plate be transferred to one's son?

Hangzhou license plates cannot be transferred to children. Below is relevant knowledge about license plates: Points to note regarding license plate transfer: License plate numbers cannot be transferred through a transfer process. The original license plate can only be reassigned to the owner's new vehicle information and cannot be transferred to another person. This means that even if the license plate number is reassigned to another vehicle, it will remain the property of the original owner for six months, after which the license plate will enter the license plate resource pool. When a motor vehicle undergoes a transfer registration or cancellation registration, the license plate number must be changed. Only small vans used for goods transportation can retain their original license plate numbers. Function of license plates: License plates serve as a numbering and information registration system for vehicles. Their primary function is to identify the region to which a vehicle belongs and to trace the vehicle's owner and registration information based on the license plate.
7
0
Share

Is the lighting test in Subject 3 random or fixed?

Subject 3 lighting test is randomly combined. For the simulated lighting test, it is clear that corresponding lighting operations must be performed according to the voice prompts. If one light is not operated correctly or the wrong operation is made, the test will be failed. Moreover, several questions are randomly selected, but the simulated lighting test mainly consists of a few operations, including low beam, high beam, alternating high and low beams, and turning on the hazard warning flashers. The specific content of the Subject 3 simulated lighting test is as follows: The content of the simulated lighting test mainly targets some complex road conditions or nighttime driving scenarios. The nighttime driving lighting simulation test will randomly select three items from the project for examination. Candidates only need to use the corresponding lights based on the principle of not interfering with others and ensuring safety. Notes: During the test, there will be voice prompts for light usage, and the operation must be completed within 5 seconds after the voice prompt ends. Do not be slow, but also do not act before the prompt is finished.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.