Where to Add Antifreeze for Geely Emgrand?
1 Answers
Geely Emgrand's antifreeze filler port is located inside the engine compartment. Open the left side of the engine hood, and you will see the marking. Method for replacing antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes. Pay special attention to the five-way water pipe, which is named for its five connections to different parts. Antifreeze flows through the five-way pipe and is then distributed to various parts of the car to function. If there is any antifreeze leakage in this part, replace the water pipe or resecure the connection as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir, then continuously inject water into the reservoir to allow it to flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will be slightly pinkish. Continue adding clean water until clear water flows out. Note: Remember to remove the heater hose and drain the water from the heater core. About an hour after draining, add the new antifreeze through the radiator hose—this allows the antifreeze to flow quickly into the radiator. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop. Add more antifreeze until it reaches the "MAXT" mark on the reservoir.
