Where should the ETC for trucks be installed?
1 Answers
The ETC installation position for trucks is in the middle-lower part. ETC installation requirements: the height should not be lower than 1.2 meters or higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). ETC usage precautions: The ETC transaction sensing range is 8 meters. When encountering a stopped vehicle ahead, to prevent the vehicle ahead from having a faulty ETC device or no ETC device at all, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic sensing and paying for the vehicle ahead. The recognized speed for ETC lane passage is 20km/h. If the speed is too fast, the vehicle device information cannot be read, which will also result in failed deductions. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. For non-manual loosening or detachment, only reactivation is required.