···
Log in / Register

Where is the X-Trail's cabin air filter located?

3 Answers
ElliotLynn
09/06/25 7:37am
The X-Trail's cabin air filter is located inside the interior panel in front of the driver's footwell. It ensures the air filter fits tightly against the housing, preventing unfiltered air from entering the cabin, and separates solid impurities such as dust, pollen, and abrasive particles from the air. The X-Trail's engine hood features two arched protrusions, combined with irregular pentagonal headlights, giving the front fascia a playful and cute cartoon-like appearance. The vehicle's body lines are full of tension, with a curved waistline running along the lower edge of the side windows from the front to the taillights, outlining powerful lower body lines. The wide body below the waistline and the flared wheel arches create a robust SUV stance.
Was this review help?
10
3
Share
VivianAnn
09/18/25 7:16am
I've been driving my X-Trail for several years and have replaced the cabin air filter myself multiple times. It's located behind the glove compartment in front of the passenger seat. First, open the glove box, and you'll notice small plastic clips or damper rods on both sides. Gently press and release them to fully lower the glove box. Once lowered, there's a rectangular plastic cover inside, usually black, which can be pried open directly to reveal the filter. The filter tends to accumulate dust, affecting the air quality from the AC vents. If left unchanged for too long, the air blowing out may develop a musty or unpleasant odor, making it particularly uncomfortable to breathe. I recommend checking it annually or every 20,000 kilometers, purchasing a new filter for replacement—it's a simple and quick process. Be gentle when removing to avoid breaking the clips, and remember to shake off any dust before installing the new one. The whole procedure takes about five to ten minutes.
Was this review help?
8
0
Share
Expand All
Joanne
11/01/25 7:44am
As an ordinary car enthusiast, I'd like to share that the Qashqai's cabin air filter is hidden behind the glove compartment above the passenger footwell. You need to open the glovebox and remove the limit rods or clips on both sides, then the glovebox will drop down to reveal a rectangular cover plate. The filter is located behind this cover. Replacing the filter is crucial because it cleans the cabin air - when dirty, it accumulates dust and even breeds bacteria, which is harmful to health. I've tried changing it myself and found it not too difficult, taking about ten minutes to complete. If beginners are worried about making mistakes, they can search for video tutorials first or ask a car-savvy friend for help to avoid damaging plastic parts by applying too much force. I recommend replacing it every 10 to 20 months to maintain fresh air in the car.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What are the reasons for the blower not working in the Nissan Sylphy Classic?

The reasons for the blower not working in the Nissan Sylphy Classic are as follows: 1. Prolonged usage: The blower has been used for a long time, leading to excessive dust accumulation, which increases the friction coefficient between the rotor and the bearing, causing the rotor to be obstructed or even stuck, resulting in overheating and damage to the coil. 2. Insufficient power supply: There may be no 220V AC input or the coil may be damaged. Turn on the power and carefully measure both ends of the power cord with a test pen. If one end lights up and the other does not, it indicates that the power input is normal, and the blower coil may be damaged. If the test pen shows both ends lighting up or neither lighting up, it indicates an issue with the power input.
10
0
Share

What causes the air conditioning in the Sylphy to stop blowing air?

Nissan Sylphy's air conditioning suddenly stops blowing air due to reasons such as blower motor failure or air filter failure. Blower motor failure: As the core component of whether the air conditioning blows air or not, if the blower motor fails, it will definitely stop blowing air. The causes of blower motor failure may include overheating damage to internal coils or capacitor failure. You can turn the car's air conditioning speed and airflow to the maximum and listen to the sound of the blower motor to determine if there is a fault. The vehicle can be taken to a repair facility for a thorough inspection to determine the cause of the failure. Air filter failure: Blockage of the air filter is the most common situation where the air conditioning stops blowing air. Outside air passes through the air filter before entering the car, and it also absorbs many airborne particles, making it prone to clogging. The air filter can be removed, and if it is not very dirty, use an air gun to clean the debris before reinstalling it to check the air conditioning vents.
15
5
Share

What are the differences between the Xuan 580 and Mei 580?

The differences between the Xuan 580 and Mei 580 are as follows: 1. Different configurations: The Mei 580 features a panoramic sunroof that can be opened, keyless entry for the front seats, GPS navigation system, navigation traffic information display, and road rescue call. The Xuan 580 offers battery preheating and rear seats that can be folded down in a proportional manner. 2. Different prices: The post-subsidy price of the Mei 580 is slightly higher than that of the Xuan 580. Similarities: Both new cars have the same powertrain, equipped with a permanent magnet synchronous motor with a maximum power of 100kW and a maximum torque of 225 Nm, with an NEDC comprehensive range of 460km.
12
4
Share

Where is the Bluetooth in a Chevrolet car?

Chevrolet's in-car Bluetooth can be activated through the central control screen. Below is relevant information about in-car Bluetooth: 1. Overview: In-car Bluetooth (English: Bluetooth). In-car Bluetooth is an in-vehicle wireless hands-free system designed and developed based on wireless Bluetooth technology. 2. Description: If the in-car Bluetooth technology is integrated with the car's audio system, when in use, a Bluetooth-enabled phone can be paired with the car's audio system. This allows the car owner to automatically switch the audio sound to mute when receiving a call, and the sound automatically resumes when the call ends. After installing an in-car Bluetooth system, the car owner does not need to be distracted while driving to answer calls. To answer incoming calls, the user only needs to press a button lightly or use voice control, thereby enhancing driving safety and convenience.
13
2
Share

Chevrolet 2.0L Displacement Cars?

Currently, the domestically available Chevrolet model with a 2.0L displacement is the Chevrolet Malibu. Below is relevant information about car displacement: 1. Displacement and Cars: The space volume that the piston moves from top dead center to bottom dead center is called cylinder displacement; if the engine has multiple cylinders, the sum of all cylinders' working volumes is called engine displacement. It is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, which can better represent the size of the engine than bore and cylinder count. Many indicators of the engine are closely related to displacement. 2. Displacement Classification: The classification of car levels in China is determined by the size of the displacement. Mini cars have a displacement ≤1.0L; compact cars have a displacement in the range of 1.0-1.6L; midsize cars have a displacement in the range of 1.6-2.5L; executive cars have a displacement in the range of 2.5-4.0L; luxury cars have a displacement >4.0L.
13
1
Share

What is the tire pressure for the Sylphy?

The recommended tire pressure for the Sylphy is generally around 2.3-2.5 bar. This is a suggested value, and in actual driving conditions, it should be adjusted based on the season and usage environment. Car owners can refer to the vehicle's user manual and the label near the door, which will detail the manufacturer's recommended values. The tire pressure can be flexibly adjusted according to seasonal temperature changes. During summer, the tire pressure can be slightly reduced, while in winter, when temperatures are lower, it can be slightly increased. However, it's crucial to ensure the tire pressure remains within the recommended range. According to the international GBT2978-2008 standard, the tire pressure for different types of tires is as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Tire pressure reset method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button. After hearing a "beep" sound, release the button. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.