Where is the Wuling Rongguang Water Temperature Sensor Located?

1 Answers
SophieRose
07/30/25 12:58am
Wuling Rongguang water temperature sensor is located at the water outlet of the engine's upper water pipe, on the left side of the engine, which is the side where the battery is installed. Above the front oxygen sensor, there is a three-wire sensor with a black housing, which is the water temperature sensor. It can be removed using a 19mm socket and an open-end wrench. The Wuling Rongguang is a microvan under SAIC-GM-Wuling, with dimensions of 4135mm in length, 1625mm in width, and 1870mm in height, and a wheelbase of 2700mm. In terms of power, the Wuling Rongguang is equipped with a naturally aspirated engine, delivering a maximum horsepower of 76 and a maximum power speed of 5600 rpm.
Was this review help?
20
0
Share
More Forum Discussions

What are the hidden functions of the 2020 Sagitar 1.4T Comfort Edition?

The hidden functions of the 2020 Sagitar 1.4T Comfort Edition are activated through a series of operations to prevent the vehicle from being stolen by opening the door during temporary parking, effectively improving driving safety. The operation steps are as follows: 1. Step on the brake pedal and place the gear lever in P gear. 2. Release the brake pedal and press the one-button start key twice in a row. 3. Close all four doors. 4. Hold the lock button on the driver's door for more than 10 seconds. Relevant information is as follows: 1. The body length, width, and height of the 2020 Sagitar 280TSI DSG Flagship National V are 4753mm, 1800mm, and 1462mm, respectively, with a wheelbase of 2731mm. 2. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
2
3
Share

Does the vehicle inspection require personal attendance?

Personal attendance is not mandatory; a proxy can also handle the inspection. Here are the relevant details: 1. For proxy vehicle inspections, the proxy must submit their identity proof and a copy, along with a written authorization from the vehicle owner. 2. Inspection considerations: The vehicle's exterior must not have modifications such as added body kits; the body color and window tint (including sunshade and anti-explosion films) should not be overly dark (items inside the vehicle should be visible from one meter away; mainly applies to vans and trucks, not relevant for passenger cars with 5 seats or fewer); vans and trucks must have enlarged rear license plate numbers; the number of leaf springs must not be altered; the number of seats in vans must not be increased or decreased, and a fire extinguisher is required; modifications to the cargo area of box trucks are not allowed (no side doors, no roof openings, no added tailgates); tire size must remain unchanged, and tread patterns on the same axle must be consistent.
15
0
Share

How to Find the 30cm Mark for Slope Starting in Subject 2?

Here are the methods to locate the 30cm mark for slope starting in Subject 2: 1. Observe the position of the engine hood. After hearing the voice prompt, drive forward to the right. When the right front corner of the engine hood aligns with the roadside line at the 1/3 point, the distance between the car body and the roadside line is exactly 30cm. 2. Look at the raised part of the wiper. From the driver's seat, when the raised part of the wiper aligns with the right side line, the distance is approximately 30cm. 3. Check the right front door handle. Observe the right front door handle in the right rearview mirror. If the right front door handle is tangent to the right side line, the distance is just right; if it's too far, slight adjustments are needed; if it's too close, there's a risk of crossing the line. Deduction points for 30cm include: 1. After the vehicle stops, if the body is more than 50cm away from the roadside line, 100 points will be deducted. 2. When parking, if the right front wheel is more than 30cm away from the side line (but less than 50cm), 10 points will be deducted. 3. If the vehicle crosses the solid edge line of the road while moving, 100 points will be deducted.
3
2
Share

What is the method for removing the buzzer on the Wuling Hongguang Mini?

The buzzer serves a warning function and is an integrated electronic sound device powered by DC voltage. Below are the steps to remove the buzzer on the Wuling Hongguang Mini: 1. First, turn off the power to the electric vehicle. 2. Unscrew the screws around the seat cushion and remove it to expose the battery and internal wiring. 3. Then, pull out the wiring to locate the buzzer, which is typically a round black device. Trace the buzzer's wiring to find its connector. 4. Wrap the connector with insulating tape to prevent electric leakage. Once separated, the alarm can be deactivated.
6
4
Share

How to Deal with Snow on the Car Windshield in Winter?

In case of ice formation, use an ice scraper to remove it. First, turn on the car's heater to gradually increase the interior temperature, which will slowly melt the snow on the windshield. Then, use a brush or a soft snow removal tool to brush off the accumulated snow on the windshield. Next, gently remove the remaining snow on the windshield with a snow shovel. Once the snow or ice is completely removed and has melted into water droplets, the driver can use the windshield wipers to clear the snow or water from the front windshield.
12
3
Share

Can I Get My Driver's License on the Same Day After Passing the Subject 4 Exam?

After passing the Subject 4 exam, you can receive your license on-site, usually within about 2 hours. Subject 4, also known as the Subject 4 theory test or driver's theory test, is part of the motor vehicle driver's license assessment. The main content includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge. The Subject 4 exam consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 exam was divided into two parts: the road test and an additional safety and common sense test, commonly referred to as "Subject 4," which assesses "driving ethics." Because this test is conducted after Subject 3, it is commonly called the Subject 4 exam. Officially, there is no such term as Subject 4. Before the exam, students can study traffic regulations through driver's license simulation test software on mobile or computer devices.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.