Where is the windshield washer fluid location in the Elysion?

1 Answers
DeFelicity
07/30/25 7:05am
There is a small blue-capped container on the left side of the engine compartment. The container with the front windshield spray symbol on its cap is the windshield washer fluid reservoir, and the washer fluid should be filled into this container. Do not overfill it; just enough to slightly see the water surface at the deepest part. The method for selecting windshield washer fluid is as follows: 1. In autumn and winter, the washer fluid should have excellent cleaning and antifreeze properties. Winter washer fluid should be selected based on antifreeze performance, choosing a product with a freezing point at least 10°C below the local minimum temperature. Otherwise, it may cause the washer fluid to freeze or lead to pump failure in the washer reservoir. You can choose based on the local temperature. Reputable brands categorize their products into different levels according to temperature, allowing selection based on seasonal changes. 2. Additionally, the washer fluid should also have protective properties for the windshield and wipers. This means it should protect and maintain the vehicle during normal use. Some brand washer fluids, by blending various surfactants and additives, uniquely repair minor scratches on the windshield surface, forming a protective film to provide comprehensive care for the windshield. Specially added corrosion inhibitors ensure no corrosion to various metals, protecting the car's paint, wipers, and rubber components.
Was this review help?
12
3
Share
More Forum Discussions

What needs to be done after one year of holding a C1 driver's license?

C1 driver's license holders do not need to do anything after one year. Here is relevant information about the C1 driver's license: 1. Explanation: According to new regulations, driver's licenses are reviewed every six years. Class C driver's licenses do not require annual review, only needing to be renewed before the expiration date. A C1 driver's license allows driving small and micro passenger vehicles, as well as light, micro cargo vehicles, and light, small, micro special operation vehicles. Passenger vehicles with fewer than 9 seats (such as cars) are considered small vehicles. 2. Precautions: Holding a C1 driver's license does not permit riding motorcycles; doing so will be penalized as unlicensed driving with a 12-point deduction. A Class D license is required to operate three-wheeled and two-wheeled motorcycles. Only a C1D driver's license permits motorcycle riding.
6
0
Share

What are the differences between the Mercedes-Benz Big G and Little G?

The differences between the Mercedes-Benz Big G and Little G are: 1. Different body dimensions: The Big G has a body length, width, and height of 4857 mm, 1931 mm, and 1962 mm respectively; the Little G has a body length, width, and height of 4717 mm, 1855 mm, and 1949 mm respectively. 2. Different torque: The Big G has a maximum torque of 850 Nm; the Little G has a maximum torque of 610 Nm. 3. Different horsepower: The Big G has a maximum horsepower of 585 hp; the Little G has a maximum horsepower of 421 hp. Both the Mercedes-Benz Big G and Little G are equipped with a 9-speed automatic manual transmission, and both use a double-wishbone independent front suspension and a solid axle non-independent rear suspension.
18
4
Share

How many liters of engine oil should be added to the Buick Envision?

The Buick Envision engine requires approximately 4.5 liters of oil. There is an oil dipstick on the exterior of the engine. When adding oil, it should be done appropriately, ideally reaching the middle mark on the dipstick. Adding too little oil can damage the engine, while adding too much can create excessive oil pressure, increasing the pressure in the oil lines and causing poor lubrication. The Buick Envision is positioned as a midsize SUV. In terms of exterior features, it comes with an intelligent air intake grille for reduced drag, an aluminum alloy roof rack, chrome-plated dual exhaust pipes, and multi-function exterior rearview mirrors. Regarding body dimensions, the car measures 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm.
11
1
Share

Why is there frost on the inside of car windows?

Frost forms on the inside of car windows because: after parking, the humidity inside the car is relatively high. As the car's temperature drops, the moisture in the air inside the car condenses on the windows when it encounters the cold. When the temperature drops to a certain level, the water droplets adhering to the windows freeze into ice. Car windows are an important part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and the visibility of the driver and passengers. Methods to remove frost from the inside of car windows include: 1. Using a hard plastic scraper to chip away the ice; 2. Spraying a de-icing agent onto the windows; 3. Covering the windows with a cloth after parking; 4. Turning on the vehicle's warm air to blow on the windows once the engine's coolant temperature rises; 5. Opening the doors to ventilate after parking to equalize the interior and exterior temperatures.
6
4
Share

Should the Handbrake Be Engaged When Removing Tires?

If you are removing tires on a lift, there is no need to engage the handbrake. However, if you are using a simple jack to remove the tires, then the handbrake should be engaged. Tire Introduction: Tires are the only components of a car that come into contact with the ground. They are crucial for the vehicle's driving stability and safety. As rubber products, tires age over time with prolonged use, so they need to be replaced regularly. Tire Replacement Guide: Under normal circumstances, tires installed on a car can last for four years, so it is recommended to replace them every four years. When purchasing new tires, always check the production date carefully, as tires have a shelf life. Normally, the shelf life of unused tires is three years. If the tires have been in storage for more than three years, they should not be purchased.
6
4
Share

Where to Apply for Voluntary Downgrade from A2 to C1 Driver's License?

A2 driver's license voluntary downgrade to C1 is processed at the local vehicle management office. Below are the specific details about the A2 driver's license: 1. Application Requirements: Since the A2 license can only be obtained through an upgrade, the prerequisite for obtaining an A2 license is having a B1 or B2 license. The B2 license can be applied for when initially obtaining a driver's license, requiring the applicant to be at least 20 years old; the B1 license requires an upgrade from a C1 license. After meeting the corresponding conditions for upgrading to an A2 license, you can submit an application at the vehicle management office. Once the submitted documents and physical examination are approved, you can enroll in a corresponding driving school for training. 2. Permitted Vehicle Types: The A2 license is a tractor license. It allows driving heavy and medium-duty full trailers and semi-trailer motor vehicle combinations, as well as vehicles permitted under B1, B2, C1, C2, C3, C4, and M licenses.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.