···
Log in / Register

What is the tire specification of the Ora iQ?

6Answers
DelBrody
07/29/2025, 02:59:46 PM

Specification is 205/50-R17, which is a comfort-oriented highway tire. The new car adopts a very stylish double five-spoke rim with the new brand logo at the center. Below is some information about Ora Automobile: 1. Introduction: The Ora brand belongs to Great Wall Motors and is the first independent new energy vehicle brand among mainstream Chinese automakers. Among Chinese automakers, Great Wall was the first to establish new energy vehicle business as an independent brand under brand management. 2. Expansion: With decades of technical accumulation from Great Wall, the first original pure electric model, Ora iQ, was created to provide consumers with more green travel options while maintaining quality that stands up to scrutiny.

Was this review help?
109
Share
LaAriel
08/14/2025, 08:56:25 AM

I've always been fascinated by the details of the Ora IQ. The tire specifications are usually 215/55 R17, where the number 215 represents the tire width in millimeters, the aspect ratio of 55% indicates the sidewall height, and the 17-inch wheel diameter. This size is chosen mainly to balance comfort and energy consumption. As an electric vehicle, the tire's rolling resistance directly affects the range, so the factory configuration is optimized to reduce power consumption. When driving this car, I find the tire grip decent, but in rainy conditions or sharp turns, it's advisable to maintain the recommended tire pressure around 230 kPa to avoid skidding. I recommend regular wear checks and measuring the tread depth every two years—replace them if it falls below 1.6mm, as extending tire lifespan is crucial. The original tires are often from brands like Giti or Continental, which are reliable, but don't compromise safety by opting for cheap, low-quality replacements. In short, understanding these specifications helps prevent issues at high speeds and ensures a safer, more comfortable daily drive.

Was this review help?
11
Share
Expand All
DiJosie
10/14/2025, 10:37:22 PM

As an owner of the Ora IQ, I've been driving it to and from work for several months. The tire specifications are 215/55 R17, and this combination provides a smooth ride without much bumpiness. Personally, I've found it important to frequently monitor the tire pressure—keeping it not too high in summer or too low in winter, ideally at 2.3 bar, which helps save some electricity. If the tires wear out significantly, switching to a more premium brand like Michelin can make them quieter and more durable. I've also encountered a puncture leak, so I recommend keeping a simple tire repair kit in the car—it's not troublesome. For regular maintenance, visually inspect the tires once a month for cracks or abnormal wear to save money and ensure safety. In terms of driving experience, it accelerates quickly on city roads, but be cautious when taking sharp turns at high speeds—safety is paramount. Regular maintenance ensures smooth driving and extends the vehicle's lifespan.

Was this review help?
4
Share
Expand All
MacMaci
11/27/2025, 10:29:02 PM

The Ora IQ's tire specifications are typically 215/55 R17, which significantly impacts safety. Tires serve as the first line of defense in driving, with their size designed considering weight distribution to ensure braking effectiveness. Deviations in tire pressure can lead to loss of control, so it's recommended to check them every season. Excessive wear or aging increases the risk of blowouts—don't overlook the right time to replace them, and pay more attention in daily use.

Was this review help?
17
Share
Expand All
RyleeAnn
01/17/2026, 11:52:55 PM

From an economic perspective, the tire specification of the Ora IQ, 215/55 R17, is not expensive. A set of original tires costs around 800-1200 yuan, but the lifespan depends on driving habits. With my habit of smooth acceleration, the tires can last over 40,000 kilometers, saving a lot of money. Regular rotation and balancing can extend their use and improve efficiency. Remember, don't wait until they're completely worn out to replace them—it's unsafe and costs more in the long run. High cost-effectiveness is what truly matters.

Was this review help?
5
Share
Expand All
OliveMarie
04/14/2026, 01:30:10 AM

When driving the Ora IQ, I find that the 215/55 R17 tires provide excellent handling fun, with quick acceleration response and agile cornering in the city. The specifications are well-suited to the characteristics of an electric vehicle. If you want to enhance the sporty feel, switching to Michelin low rolling resistance tires would make it quieter and more efficient. However, avoid randomly changing the size, as it could affect the warranty and safety performance. In short, maintaining the specifications is crucial for driving pleasure.

Was this review help?
6
Share
Expand All
More Q&A

How big is the trunk of the Leiling?

The trunk dimensions of the Leiling are 540mm in length, 1000mm in width, and 695mm in height. Below is an introduction based on the 2021 Leiling model: 1. The Leiling is a compact car equipped with a 1.2T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 185Nm, and a maximum power of 85kW. It is paired with a 10-speed continuously variable transmission. 2. The 2021 Leiling has a body size of 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm, a minimum ground clearance of 105mm, and a curb weight of 1350kg.
117
Share

How Often Should the Outlander Be Serviced?

The Mitsubishi Outlander typically requires its first service at 5,000KM, the second at 15,000KM, and the third at 25,000KM. Subsequent services should follow the maintenance manual's guidelines. Vehicle maintenance includes the following items: 1. Primary vehicle maintenance tasks: After completing primary maintenance, the vehicle should be clean, connections secure, filters unobstructed, and free from oil, water, air, or electrical leaks. 2. Lubrication tasks for primary vehicle maintenance: Check the oil levels in the generator, transmission, rear axle, and steering gear, and add lubricating oil as required. Ensure all lubrication points are equipped and functional. 3. Inspection and tightening tasks for primary vehicle maintenance: Check the steering gear, tie rods, drag links, and steering arm connections for secure fastening.
117
Share

Will the electric rearview mirror break if manually adjusted?

Manually adjusting the electric rearview mirror will not break it. The electric rearview mirror is computer-controlled and automatically folds when the car is locked. However, frequent manual adjustments over time may affect the normal operation of the rearview mirror. The adjustment method for the rearview mirror is: 1. Press the circular button for the rearview mirror located on the door. 2. Adjust the corresponding rearview mirror up, down, left, or right as needed. The functions of the rearview mirrors are: 1. Interior rearview mirror: A mirror that allows the driver to confirm the rear situation while looking forward during driving. 2. Exterior rearview mirror: Installed on the car door, it enables the driver to see vehicles behind. 3. Underview mirror: Allows the driver to see areas outside the front and rear wheels beneath the car body through the mirror directly in front of the driver's seat.
107
Share

How to Drive an Automatic Transmission Car in Traffic Jams on Uphill Roads?

When encountering a traffic jam on an uphill road, it is important to prevent the car from rolling back and maintain braking. For an automatic transmission car, the gear should be placed in the P (Park) position, and the handbrake should be engaged. Some automatic transmission models have an O/D (Overdrive) button, which functions as follows: 1. When driving downhill, pressing the O/D button forces the car to stay in a lower gear without upshifting. This allows the use of engine braking and avoids frequent use of the brake pedal, enhancing safety during downhill driving. 2. In stop-and-go traffic, the car may frequently shift between 1st and 2nd gears, increasing fuel consumption and wearing out the brake pads. Pressing the O/D button can mitigate these issues, prolonging the car's lifespan. 3. When overtaking, if pressing the accelerator does not provide sufficient acceleration, pressing the O/D button increases the vehicle's torque, raising the engine speed for easier overtaking.
116
Share

Is Automotive Urea Toxic?

Automotive urea itself is non-toxic. However, during the production of such plastic containers, certain processing or modifying additives are used, such as fillers, stabilizers, or pigments, which contain harmful substances. Introduction to Automotive Urea: Automotive urea is a liquid used in SCR (Selective Catalytic Reduction) technology to reduce nitrogen oxide pollutants in diesel vehicle exhaust. Its composition consists of 32.5% high-purity urea and 67.5% deionized water. Environmental Standards: Environmental protection agencies worldwide have proposed further reductions in nitrogen oxide emissions from diesel engines. Domestically, it is commonly referred to as the Euro IV standard. Engine manufacturers have begun using SCR technology (Selective Catalytic Reduction Technology) to meet the requirements of environmental agencies. Diesel exhaust fluid (commonly known as automotive urea, vehicle urea, or automotive environmental urea in China) is a consumable essential for SCR technology.
104
Share

When will China VI be implemented?

China VI is divided into two standards, each with its own implementation time, as follows: 1. China VI a. Starting from July 1, 2020, light-duty vehicles will be required to comply with the China VI a emission standard. 2. China VI b. Starting from July 1, 2023, light-duty vehicles will be required to comply with the China VI b emission standard. However, many provinces and cities have implemented it ahead of schedule. The implementation time may vary according to local regulations: 1. Guangzhou: Light-duty vehicles will implement China VI starting from January 1, 2019. 2. Jiangsu: All gasoline supplied will comply with China VI starting from October 1, 2018. 3. Guangdong: China VI diesel has been on the market since July 1, 2019. 4. Shandong: The China VI emission standard for motor vehicles will be implemented province-wide starting from July 1, 2019. 5. Shenzhen: China VI will be fully implemented in January 2019. Fuel vehicles with emissions below this standard will be restricted from sale, purchase, and road use.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.