Where is the VIN stamping location on Wuling Hongguang?

3 Answers
DeDerek
07/24/25 8:01pm
The VIN stamping on the Wuling Hongguang is located at the end of the engine block, near the flywheel. Tampering with the engine stamping number is strictly prohibited. If an engine replacement is required, it must be registered with the vehicle management office. The stamped number is used during vehicle registration and ownership transfer. Below is more information about the Wuling Hongguang: 1. Brand History: The Wuling Hongguang is SAIC-GM-Wuling's first self-developed crossover product positioned between commercial vehicles and passenger cars. With its streamlined exterior design, versatile and practical spacious cabin, perfect balance of power and fuel efficiency, along with outstanding handling and safety performance, it has redefined traditional perceptions of commercial vehicles. 2. Brand Advantages: The Wuling Hongguang has carved a niche in the commercial vehicle market dominated by larger models through its small displacement, ingenious design, refined interior, and powerful cross-segment performance.
Was this review help?
4
1
Share
McEmersyn
08/10/25 9:13am
On my Wuling Hongguang vehicle, the VIN (Vehicle Identification Number) stamp location is particularly noticeable, usually at the lower left corner of the windshield, clearly visible from the driver's seat. There's a distinct metal plate imprint displaying the VIN code. I've also checked under the hood—it's located near the firewall in the engine compartment, close to the wiper arm area, though slightly recessed and may require wiping off dust for visibility. The VIN acts like a car's ID card, essential for insurance and repairs. With years of driving experience, I've encountered instances where dirt obscured it, so I make a habit of checking its visibility after each car wash—a hassle-free routine. While the position generally remains consistent, slight variations may exist across different Wuling Hongguang models, as mentioned in the manual, making it easy to locate with guidance.
Was this review help?
16
5
Share
Expand All
MaryFitz
09/26/25 4:26am
As a young driver of a Wuling Hongguang, I found the location of the VIN quite novel—it's most commonly placed at the lower left edge of the windshield, very close to the steering wheel, making it easy to spot with just a glance. Sometimes I also peeked at the B-pillar or door frame to see if there was a secondary imprint, but most assemblies have it on the glass. The VIN is crucial, designed for anti-theft and anti-counterfeiting, so I took a photo and saved it on my phone for convenience. The placement is user-friendly, and it doesn’t easily get smudged even in the rain. It took me a little time to get used to it at first, but once I got the hang of it, it only took seconds, sparking my interest in car details and making me more attentive to maintenance.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

Are the Chery Tiggo 8 and Tiggo 8 Plus in the same class?

Chery Tiggo 8 and Tiggo 8 Plus are in the same class. Both the Tiggo 8 and Tiggo 8 Plus are mid-size SUVs and share the same powertrain. Both models are equipped with two engines: a 1.5-liter turbocharged engine and a 1.6-liter turbocharged engine. The 1.5-liter turbocharged engine delivers a maximum power of 115 kW and a maximum torque of 230 Nm, with the peak power achieved at 5,500 rpm and the peak torque available between 1,750 to 4,000 rpm. The 1.6-liter turbocharged engine produces a maximum power of 145 kW and a maximum torque of 290 Nm, with the peak power at 5,500 rpm and the peak torque between 2,000 to 4,000 rpm.
19
4
Share

What is the displacement of 1.5t?

1.5t displacement is 2L. Automobile displacement is expressed in liters (L). For example, 1.5L represents that the engine of the vehicle has a displacement of 1.5 liters. 1L of gasoline weighs approximately 0.72-0.73 kilograms. Taking a 1.5T engine as an example, a 1.5t engine is essentially a 1.5L naturally aspirated engine equipped with a turbocharger to enhance the engine's output power and torque. Some vehicles equipped with turbocharged engines will specifically display these numbers on the rear door. The following are factors that affect automobile displacement: Internal factors: The engine displacement is the sum of the working volumes of all cylinders. The displacement of each cylinder refers to the volume of gas expelled when the piston moves from the top dead center to the bottom dead center, which depends on the cylinder bore and piston stroke. Body factors: Vehicle model, weight, and engine performance are direct factors. The displacement of a car depends on the initial design concept of the model. The model determines the curb weight (vehicle weight), and the vehicle weight determines the engine displacement.
15
3
Share

What was the brand of China's first domestically produced automobiles in July 1956?

In July 1956, China's first domestically produced automobiles were the Jiefang brand trucks, primarily used for military cargo transport. The emergence of Jiefang trucks marked the end of China's inability to manufacture automobiles. Below is an introduction to Jiefang trucks: The creation of Jiefang trucks: The first model of Jiefang trucks was called the CA10, which was manufactured based on Soviet automobile designs. The vehicle weighed 3,900 kilograms and was equipped with a 90-horsepower, 4-stroke 6-cylinder engine. It had a load capacity of 4 tons and a top speed of 65 kilometers per hour, making it suitable for China's road conditions at that time. The development of Jiefang trucks: Jiefang trucks were known for their robust structure and long service life, which led to the production of older Jiefang models continuing for 30 years. The evolution of FAW (First Automobile Works) reflects the development of China's automobile industry. After decades of progress, Chinese automobiles have significantly entered the international market.
7
2
Share

Does the base model Magotan come with a sunroof?

The base model Magotan comes with a sunroof, and the openable panoramic sunroof is an optional feature. The car sunroof is installed on the roof, effectively improving air circulation inside the vehicle and increasing the intake of fresh air. Additionally, the sunroof can provide a broader view and meet the needs of mobile photography and videography. The 2019 Magotan has a body length of 4866mm, width of 1832mm, height of 1464mm, a wheelbase of 2871mm, a fuel tank capacity of 66L, and a curb weight of 1440kg. The 2019 Magotan is equipped with two engines: a 1.4T and a 2.0T, with the 2.0T version available in both high and low power outputs, paired with a 7-speed dual-clutch transmission. All Magotan models feature an HSB high-strength body structure design, with 74% of the body structure made of high-strength and ultra-high-strength steel plates, significantly enhancing body strength while reducing weight.
9
3
Share

What engine is used in the Chery Tiggo 8plus?

Chery Tiggo 8plus is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.6-liter turbocharged engine. The Chery Tiggo 8plus is a mid-size SUV with dimensions of 4722mm in length, 1860mm in width, and 1745mm in height, and a wheelbase of 2710mm. The 1.5-liter turbocharged engine in the Chery Tiggo 8plus delivers a maximum power of 115kW and a maximum torque of 230Nm, with the maximum power achieved at 5500 rpm and the maximum torque available between 1750 to 4000 rpm. It is paired with a CVT transmission. The 1.6-liter turbocharged engine produces a maximum power of 197 horsepower and a maximum torque of 290Nm, with the maximum power reached at 5500 rpm and the maximum torque available between 2000 to 4000 rpm. It is matched with a 7-speed dual-clutch transmission.
3
4
Share

Can You Release the Clutch in First Gear?

You can release the clutch in first gear, but it needs to be done slowly, gradually releasing it all the way down. Do not release the clutch pedal too quickly during the process. First gear is the starting gear, which provides relatively high output torque. Releasing the clutch slowly helps prevent the car from lurching forward, which could pose a safety hazard or cause the engine to stall. Below are the steps for starting a car: Preparation Stage: Walk around the car before getting in, fasten your seatbelt, and adjust the seat to a comfortable position. Adjustment Stage: Start the car, quickly press the clutch pedal all the way down, and shift into first gear. Observation Stage: Turn on the turn signal, check the surroundings (both side mirrors), and release the handbrake if it is safe. Starting Stage: Quickly lift the clutch to the semi-engagement point and pause briefly, then slowly release the clutch while gently pressing the accelerator. The car will begin to move slowly. Slightly lift the clutch pedal again for a smooth start.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.