Where is the VIN located on a small car?

What is the fuel consumption of the GTR?

The GTR has a fuel consumption of 12.10 liters per 100 kilometers. Compared to the previous GT-R, the 2014 model: The most significant change in the new car is the 0-100km/h acceleration time, which has improved by 0.1 seconds to 2.7 seconds. This is mainly due to the reduced drag coefficient and improved power tuning. The 2014 GT-R still uses the 3.8T-V6 engine from the current model, with slightly improved power parameters. The maximum power output is 553 horsepower, an increase of 13 horsepower compared to the previous model, while the peak torque remains at 628 N.m. Compared to the edition, the Black Diamond Edition: The Black Diamond Edition features RAYS forged ultra-lightweight 6-spoke black aluminum alloy wheels, a unique red and black interior, RECARO leather racing seats, and a carbon fiber rear wing. The Nissan GT-R Black Diamond Edition is still powered by a 3.8-liter twin-turbocharged engine, with a maximum output of 550 horsepower and a peak torque of 632 Nm. In terms of the transmission system, the engine is paired with a 6-speed dual-clutch transmission.

6

5

Share

What to Do If Beginners Can't Tell Whether the Steering Wheel Is Straight?

Here are some techniques for straightening the steering wheel: 1. Feel the weight: Turn the steering wheel 90 degrees left and right while stationary to sense its weight. When the steering wheel is straight, turning it 90 degrees feels lighter, whereas turning it 90 degrees after a full rotation feels tighter. Alternatively, try turning it one full rotation to determine whether it's currently straight or turned 180 degrees. 2. Move forward and backward: Use slight forward or backward movement to check if the steering wheel is straight. After parking, move slightly forward or backward. If you can't remember how many turns the steering wheel has made, this movement can help you determine its position and adjust accordingly while moving. 3. Check tire direction: Stick your head out the window to observe whether the tires are straight. Observing while driving makes it easier to straighten the steering wheel. 4. Look at the steering wheel emblem: Whether you've turned the wheel half a rotation or fully, you don't need to worry about degrees when straightening—just ensure the emblem returns to its upward-facing position.

12

5

Share

Does driving a CR-V at 40 mph with body shaking have any impact if not repaired?

Driving a CR-V at 40 mph with body shaking does have an impact if not repaired. If not addressed promptly, the issue may worsen and could even lead to vehicle damage. Causes and solutions for car shaking: Wheel or resonance issues: The problem may be due to wheel imbalance or resonance-induced shaking. It is recommended that the driver visit a 4S shop for inspection and repair. Engine carbon buildup: Severe carbon buildup in the engine can cause dirty throttle bodies or clogged fuel injectors, preventing complete combustion of fuel in the combustion chamber and affecting power transmission, leading to car shaking. In this case, the driver should regularly clean carbon deposits and the throttle body. Tire deformation: Tires may deform due to daily wear, collisions, or aging. In such cases, it is recommended that the driver replace the tires. Fuel system failure: Unstable fuel pressure can cause inconsistent fuel-air mixture concentration, leading not only to shaking but also to unstable idling. It is advised that the driver take the vehicle to a repair shop for inspection. Misfiring or cylinder issues: This is a common cause of engine shaking, often related to faulty ignition coils or spark plugs. If the ignition coil is malfunctioning or the spark plug fails to ignite, the car will shake. In this scenario, the driver should replace the ignition coil or spark plugs.

9

3

Share

How to Operate the High and Low Beam Switch?

Detailed introduction about the high and low beam switch of a car is as follows: 1. Specific operation for switching between high and low beams: When the switch is turned to the low beam position, pulling the lever inward will flash the high beam once, while pushing it outward will keep the high beam on continuously. 2. The light of the low beam is directed downward, projecting within 12-18 meters in front of the car with a very distinct cutoff line between light and dark: Within the range of 30-40 meters behind the cutoff line of the low beam, relying on ground-reflected light, brightly colored objects in this area can be distinguished. However, stationary dark-toned objects on the road are not easily noticeable, so extra caution is needed when driving at night. 3. Situations requiring immediate switching from high beam to low beam: When a vehicle is approaching from the opposite direction, when the distance to a vehicle ahead in the same direction is relatively close, when the road is already sufficiently illuminated, or when entering a busy street.

9

5

Share

How to Steer When the Rear of the Car Drifts to the Left?

The steering method when the rear of the car drifts to the left is as follows: 1. When reversing: Turn the steering wheel to the left, and the rear of the car will turn left; turn the steering wheel to the right, and the rear of the car will turn right. 2. When correcting: If the rear of the car drifts to one side, when the body drifts left, you need to move right to correct it, so steer right; otherwise, do the opposite. Precautions for reversing are as follows: 1. Speed: When reversing, master the operation method of slow driving and quick steering. The reversing speed should be controlled within 5km/h. 2. Repeated reversing: During reversing, if limited by terrain or the steering angle of the steering wheel, and repeated forward or backward movements are required, at the moment before each stop when reversing or moving forward, quickly use the movement of the vehicle to turn the steering wheel to prepare for the next forward or backward movement. Do not forcefully turn the steering wheel after the vehicle has stopped.

17

3

Share

What are the tips for passing the Subject 2 driving test?

Here are some tips for Subject 2: 1. Keep the speed slow: This is the fundamental rule for practicing Subject 2. It means keeping the speed as slow as possible without stopping the vehicle, as slower speed allows more time for adjustments. 2. Adjust the rearview mirrors properly: After getting in the car, make sure to adjust the rearview mirrors correctly, which is especially important for reverse parking and parallel parking. Generally, the rearview mirrors should be positioned lower than usual, with the rear door handles close to the top edge of the mirrors to see the ground markings clearly. 3. Master the three-point alignment method: The three points refer to the driver's eyes, reference points on the car, and reference points on the ground. During Subject 2 operations, it's crucial to identify these points accurately and observe them carefully to ensure precise positioning. 4. Pay attention to the four corners of the car: The front corner is prone to touching the outer line during reverse parking, while the rear corner may touch the side lines of the parking space; the front corner may cross the line during curve driving; the front corner may cross the line during right-angle turns; the front corner may touch the outer line or the left front corner of the parking space during parallel parking, and the right rear corner may touch the right parking space line. Therefore, always be mindful of the four corners and the outer lines.

13

1

Share

Where is the VIN located on a small car?

What is the fuel consumption of the GTR?

What to Do If Beginners Can't Tell Whether the Steering Wheel Is Straight?

Does driving a CR-V at 40 mph with body shaking have any impact if not repaired?

How to Operate the High and Low Beam Switch?

How to Steer When the Rear of the Car Drifts to the Left?

What are the tips for passing the Subject 2 driving test?

What do the internal and external air circulation modes in a car mean?

Does the Avalon use Aisin 8AT?

What are the documentation requirements for parallel-imported vehicles?

What is the fuel consumption per 100 kilometers for the Trumpchi GS8?