Where is the vehicle frame located?

2 Answers
Owen
07/24/25 12:14pm
Vehicle frame location: There are two channel steels under the car body, running from the front to the rear of the vehicle, which is the position of the frame. The vehicle frame is supported on the wheels via the suspension system, front axle, and rear axle. Here is some relevant information about the vehicle frame: 1. The vehicle frame, also known as the chassis, is the base of the vehicle and is supported on the wheels via the suspension system, front axle, and rear axle. The frame is generally composed of longitudinal beams and cross beams. Its main forms are side rail type and center beam type. 2. The vehicle frame is the main load-bearing component of a truck, carrying almost the entire weight of the cargo. The quality of the frame affects the vehicle's service life and driving safety. The manufacturing of vehicle frames typically uses stamping forming processes, with bending being the primary deformation method. Therefore, the frame plate requires high formability, meaning the steel plate used for the vehicle frame must have good comprehensive performance, sufficient strength and toughness, as well as excellent fatigue resistance and cold formability.
Was this review help?
12
5
Share
McWalker
08/11/25 6:21am
The vehicle frame, also known as the chassis frame, is the skeleton located at the very bottom of the car, stretching from the front all the way to the rear. If you crawl underneath the car, you'll notice those robust steel beam structures that act like the vehicle's backbone, supporting the entire car. The frame primarily connects the engine, suspension system, and body structure, so when driving over bumpy roads or taking sharp turns, it absorbs most of the shocks, protecting other components. When I used to go off-roading, the alignment of the frame was especially crucial because it's fixed to the chassis. If it's not properly aligned, it can affect the vehicle's balance and safety. Regular maintenance should include checking for rust or cracks, as these can impair handling and even lead to accidents over time. In short, it's located underneath the car and can be easily inspected either visually or with professional tools.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Will the Accord chassis be damaged if it is hit?

The chassis of the Accord being hit generally won't cause any issues as long as the speed was low during the impact and the collision sound was not loud. If a loud noise occurs during the collision, it may cause the oil pan to dent or even puncture. The oil pan is where the engine oil is stored. If it is punctured and leaks oil, the engine will suffer from insufficient lubrication, leading to phenomena such as cylinder scoring, weak car performance, difficulty accelerating, elevated engine temperature, and unstable RPM. Common causes of chassis scraping: 1. Uneven roads, surfaces with many grooves or potholes: Such roads primarily damage the front bumper, suspension, and tires. Solution: Slow down and drive cautiously, avoid such roads whenever possible, observe road conditions, and estimate your car's ground clearance to steer clear in advance. 2. Being scratched by debris when crossing road surfaces: In this case, the most vulnerable parts are the oil pan and suspension, which can easily lead to oil pan rupture. Solution: Keep your vision focused farther ahead while driving, spot debris early, and try to avoid it.
15
1
Share

Where is the tire pressure reset button for Geely Vision?

Geely Vision X6's tire pressure monitoring reset button is located on the right side of the vehicle's steering wheel. Additional related information is as follows: 1. Tire pressure: The status of the tire pressure can be viewed through the tire pressure monitoring item on the instrument panel of the Vision X6. Normally, the vehicle's tire pressure between 2.3PA and 2.5PA is considered normal. If the tire pressure is abnormal, the vehicle will issue a warning reminder. After checking and restoring the tire pressure to normal levels, the owner can reset the tire pressure monitoring to eliminate the alarm reminder. 2. Impact of tire pressure: The pressure of car tires has many effects on vehicle operation and performance, especially on tire maintenance. Tire pressure is affected by temperature. In summer, when temperatures are high, the density of the gas decreases, causing the tire pressure to rise. Therefore, when summer temperatures are too high, be careful not to overinflate the tires. Excessive tire pressure can affect the vehicle's handling performance, cause excessive wear on the tread in the middle of the tire, reduce the tire's service life, and more seriously, excessive tire pressure can easily lead to tire explosions, which are highly dangerous. Therefore, it is important to always monitor changes in tire pressure.
14
4
Share

What are the items in the automatic transmission subject three test?

Automatic transmission subject three test content: preparation before getting on the car, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing crosswalks, passing school zones, passing bus stops, meeting cars, overtaking, making U-turns, and driving at night. Extended information about the test items and precautions is as follows: 1. Preparation before getting on the car: adjust the seat and rearview mirror before getting on the car, and check whether the brakes and acceleration are normal. 2. Other items: left and right turns and U-turns (do not move the steering wheel within three seconds of turning on the turn signal, and the speed must match the gear). Passing bus stops, passing crosswalks, passing school zones (speed cannot exceed 30 km/h, and look left and right to see if there are pedestrians passing). Shifting gears operation (complete the shifting gears operation within the specified time and distance). Changing lanes and overtaking (do not turn the steering wheel within three seconds of turning on the turn signal, and complete within the specified time and distance). Driving straight (speed cannot be lower than 40 km/h, steering wheel fluctuation cannot be greater than three degrees, and complete straight driving within the specified distance). Passing traffic lights (stop and wait at red lights, stop midway, and must use first gear to start). Pulling over (choose a suitable section to pull over within the specified distance).
10
5
Share

How many points are deducted for not using the turn signal during parallel parking?

Not using the turn signal or using it incorrectly will result in a deduction of 10 points each time, as specified below: Failing to use or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Turning the steering wheel within less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. There are six instances in Subject 2 where the turn signal must be used: 1. Activate the left turn signal when starting the vehicle. 2. Activate the left turn signal when starting on a slope. 3. Activate the right turn signal when approaching the parallel parking spot and stopping within 30 cm of the curb before reversing. 4. Activate the left turn signal before shifting into reverse gear during parallel parking, as the steering wheel will be turned fully to the right, causing the front of the car to shift left. 5. Shift into drive gear and activate the left turn signal before exiting the parallel parking spot, then turn it off promptly after exiting. 6. Activate the left turn signal when entering the sharp turn area and turn it off promptly after completing the turn. Subject 2 has a total score of 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, or deducting 5 points. The test is considered passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required. The C1 and C2 license tests include five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope (C2 has canceled this item), sharp turns, and driving through curves (commonly known as S-turns). Some regions also include a sixth item: highway toll card collection. The A1, A2, A3, B1, and B2 license tests include the following items: pole test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, driving through curves, sharp turns, passing through a narrow gate, driving over continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, as well as simulated scenarios such as highways, continuous sharp mountain turns, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
16
1
Share

What to Do When You Find Your ETC Card Has No Money When Exiting the Highway?

If you find your ETC card has no money when exiting the highway, follow the guidance of the toll station staff to the MTC or manual lane, and pay the toll by swiping a card or using cash to pass. Currently, ETC cards are divided into three types: debit cards, prepaid cards (debit cards), and credit card co-branded toll cards. Among them, ETC debit cards do not have an overdraft function, so you can only pass if there is sufficient balance on the card. ETC Lane: ETC is an electronic toll collection system, the full name is Electronic Toll Collection System, abbreviated as ETC system. There is no manual toll collection platform, and it is specifically provided for ETC vehicles equipped with an onboard unit (OBU) for high-speed passage. About Insufficient Funds in the ETC Lane: When an ETC vehicle enters the ETC lane and a transaction failure occurs, the ETC vehicle owner must comply with the work arrangements of the highway management department. If the ETC device cannot be used for the transaction, you need to pass through the manual lane by swiping a card. If you receive a toll card at the highway entrance, you cannot use the Jitong card to pay at the exit. If the owner normally receives a toll card at the highway entrance, they can only pass through the MTC lane normally to pay at the exit. In the highway electronic toll collection system, owners cannot use one Jitong card to pay for multiple vehicles. They must strictly adhere to the rule of one card and one tag per vehicle. When the owner passes through the highway toll station and the display shows insufficient balance, the owner must pay in cash to pass through the toll station. If an ETC owner exits the highway and the ETC lane does not lift the barrier, the owner pays at the manual lane to exit the highway, but the ETC also receives a deduction notice, resulting in duplicate charges. Keep the payment receipt and contact the ETC customer service hotline to apply for a refund. Things to Note About the Passage Method: Entering the ETC lane and exiting the ETC lane will not result in a charge. Entering the manual lane and exiting the manual lane will not result in a charge. Entering the manual lane and attempting to exit the ETC lane will not lift the barrier because the system does not have entry information. In this case, you must choose the manual lane. Entering the ETC lane and exiting the manual lane allows normal passage and will not result in a charge. Precautions for Using ETC Cards: Before using ETC to pass through the toll station, ETC vehicles must ensure the ETC card is correctly inserted into the OBU when passing through the ETC dedicated lane. During driving, bumps may cause the ETC card to become loose, so it is necessary to check it in time and reinsert it into the OBU if it is loose. The ETC card must be dedicated to one vehicle and cannot be changed arbitrarily after being bound to the vehicle. Before using ETC, pay attention to the fee information displayed on the dedicated lane sign. If the card balance is insufficient, recharge it in time. When passing through the ETC lane and the barrier does not lift, actively comply with the arrangements of the toll station staff or switch to the manual toll lane. If the highway toll station temporarily closes the ETC toll lane, you should use the manual toll lane to pay. The ETC dedicated lane has a speed limit of 20 kilometers per hour, and you must maintain a distance of more than 5 meters from the vehicle in front before passing. If an ETC vehicle receives a toll card in the manual toll lane, it cannot use the ETC toll lane after exiting the highway and must use the manual toll lane.
7
5
Share

What is the Michelin run-flat tire symbol?

The symbol is RSC. Michelin tires are products of the Michelin company, which was founded in 1889 in Clermont-Ferrand, France. Over more than 100 years, Michelin has undergone continuous innovation and development. Michelin firmly believes that safety is the primary need of drivers and passengers, as well as the most fundamental mission of tire manufacturers. Additional information: All Michelin tire products adhere to globally unified quality standards, ensuring product quality. The extensive product line is researched and designed to address complex and changing road conditions, climate conditions, as well as different driving needs and habits.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.