Where is the USB port located in the old Honda Fit?

2 Answers
JayceMarie
07/29/25 12:03pm
The USB port of the Honda Fit is located next to the multimedia display. Below is the relevant information: Configuration: The Honda Fit is equipped with two sets of ISOFIX child seat interfaces. The ISOFIX interface is located under the backrest of the rear seats, with small circular plastic labels on the seats. The metal hooks hidden between the horizontal and vertical cushions are the ISO-FIX interfaces, greatly enhancing child safety. Many domestic child car seat brands are equipped with this interface, such as the Anbaobao child car seat. A child car seat is specifically designed for children of different weights (or age groups) and is installed inside the car.
Was this review help?
3
1
Share
OSawyer
08/13/25 9:46pm
I was also confused about where the USB port was in the old Honda Fit when I first drove it. Later, I found that in many 2008 to 2013 models, the USB port is located in a small recess below the center console, right next to the cigarette lighter—you can see it with a quick feel. For even older versions, there might not be a built-in USB port, so you’d need to use a cigarette lighter-to-USB adapter. I suggest checking the glove compartment or center console before driving, as sometimes the design is intentionally hidden to avoid distractions. If you still can’t find it, don’t panic—pull over and search carefully or look up Honda Fit owner forums online, where helpful people often post photos with guidance. Also, remember to clean the port regularly to prevent dust buildup, ensuring smooth connections next time.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

How to Calibrate the Senova X35 SAS?

Select the X35 model, click "Start Diagnosis", and load the program. Double-click "Electric Power Steering (EPS)" to enter the diagnostic interface. Select "ECU Configuration" and click "Steering Angle Sensor Calibration". Click "Calibrate" to complete the calibration.
9
3
Share

How to remove the small wrench icon on the 2014 B50 dashboard?

Insert the key, but only insert it without turning. Hold the lever next to the odometer for 5-10 seconds, then turn the key to power on. After another 5-10 seconds, start the car. Keep holding the lever throughout this process without releasing it. Generally, following these steps will clear the small wrench icon. If it doesn't clear, repeat the same process a few more times.
9
0
Share

What Causes High Transmission Temperature?

Reasons for high transmission temperature: 1. Clogged pump suction filter screen; 2. Poor radiator cooling capacity; 3. Severe machine overload operation; 4. Serious wear or damage to the transmission hydraulic pump; 5. Severe system leakage, improper operation of the torque converter inlet regulating proportional valve; 6. Transmission clutch slippage can also lead to excessively high transmission temperature. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixing or changing the gear ratio between the output and input shafts, also known as a gearbox. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also equipped with a power take-off mechanism.
16
2
Share

Can the car still be driven if the transmission is slipping?

If the transmission is slipping, the car should not be driven as it poses a safety hazard and requires immediate repair. Causes of transmission slipping: 1. Wear and tear of the clutch, brake, or one-way clutch leading to slipping; 2. Addition or replacement with non-specified oil; 3. Slipping caused by low main oil pressure. The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. Manual transmissions primarily consist of gears and shafts, achieving speed and torque variation through different gear combinations; automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic transmission and gear combinations.
11
2
Share

What is the valve clearance for the Ford Focus?

Ford Focus valve clearance is 0.22 to 0.28MM for intake and 0.27 to 0.330MM for exhaust when the engine is cold. Valve clearance is set to ensure the proper operation of the internal combustion engine's valve train. Since the valve train operates at high speeds and elevated temperatures, components like the valve tappet and valve stem expand when heated. Without proper clearance, this expansion could automatically push the valve open, preventing it from sealing tightly against the valve seat, leading to air leakage. The Focus is an A-segment family car and one of Ford Europe's flagship models. It is equipped with either a 1.5L EcoBoost or a 1.5L Ti-VCT engine, and all models meet the China VI emission standards.
16
2
Share

How Should Beginners Drive on the Highway?

Beginners on the highway should maintain a safe distance from the vehicle in front. Here are some tips for beginners driving on the highway: 1. High-speed driving: Avoid sudden steering wheel movements while driving on the highway. Do not reverse, drive against traffic, or make U-turns or turns across the central divider. During normal driving, the following vehicle in the same lane must maintain a sufficient distance from the vehicle in front. 2. Precautions: When entering the highway, accelerate to a speed of at least 50 km/h as quickly as possible. Vehicles entering the highway from the ramp must increase their speed in the acceleration lane. When merging into the main lane, they must not hinder vehicles already traveling in the main lane and should drive in the outer lane.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.