Where is the USB port in the Envision?

1 Answers
GarrettRose
07/29/25 6:53pm
The USB port in the Envision is located inside the center console. Below are the functions of the USB port: 1. Charging mobile devices; 2. Connecting external storage devices to play music; 3. If the navigation supports connectivity, it can also synchronize with communication devices. Additional information: 1. Vehicle dimensions: Taking the 2021 Envision 1.5T as an example, it is a midsize SUV with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, a wheelbase of 2750mm, and a fuel tank capacity of 66L. 2. Powertrain configuration: The 2021 Buick Envision 1.5T features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
18
5
Share
More Forum Discussions

Does the Roewe iMAX8 have many minor issues?

The shortcomings of the Roewe iMAX8 are as follows: 1. Average noise insulation: The iMAX8 does a decent job of isolating road and wind noise, and the low tire noise is mainly due to the Michelin Primacy 4 tires it is equipped with. However, the iMAX8 falls short in insulating engine noise. When the engine speed exceeds 2,500 rpm, the engine noise becomes quite noticeable, indicating insufficient soundproofing in the firewall area. 2. Low practicality of the Magic Cube Water Bar: Although the Magic Cube Water Bar is a major selling point of the iMAX8, in practical use, it is less useful than a traditional storage compartment. Additionally, the iMAX8 does not offer the option to replace the water bar with a storage compartment, which significantly reduces storage space. Moreover, the Magic Cube Water Bar makes accessing the third row more difficult.
3
4
Share

Does the score reset date change after adding a driving license?

After adding a driving license, the initial issuance date and the review/renewal date of the driver's license remain unchanged. Below are the specific handling methods for overdue driver's license reviews at different time intervals: 1. Less than 12 months overdue: If the license has been expired for less than 12 months, it can be renewed as usual. 2. Between one and three years overdue: If the license has been expired for more than one year but less than three years, you will need to retake the subject one exam to renew the license. Upon passing the exam, you can obtain the license. 3. More than three years overdue: If the license has been expired for more than three years, you will need to reapply for a driver's license. Driving during the overdue period is prohibited and may be treated as driving without a license. If the validity period has been exceeded by more than three years, the driver's license is considered void and canceled, requiring you to retake the driver's license exam.
14
1
Share

What Causes a Car to Have No Clutch?

There are many reasons for suddenly losing clutch function: 1. Hydraulic fluid leakage or air entering the pipeline; 2. Severe wear of the clutch disc; 3. Clutch cable breakage; 4. Foreign objects stuck under the clutch pedal; 5. Sensor damage (for automatic transmissions). Additional information about clutches is as follows: 1. Position: The clutch pedal is located on the far left of the three pedals, arranged from left to right as clutch pedal, brake pedal, and accelerator pedal. Pressing the clutch pedal disengages the clutch, while releasing it engages the clutch. When driving normally, do not rest your left foot on the clutch pedal, as this may prevent the clutch from fully engaging and could lead to excessive wear of the clutch disc. 2. Gear shifting: Ensure the clutch pedal is fully depressed, otherwise it may cause excessive wear of the clutch disc. Over time, the clutch disc becomes thinner due to wear, at which point the free travel of the clutch pedal should be adjusted to ensure the pressure plate can still tightly press the clutch disc. If the clutch disc is severely worn, it must be replaced. Severe wear of the clutch disc may result in slipping phenomena.
6
2
Share

Is the Brake Pedal Higher Than the Accelerator Pedal?

The height of the brake pedal is often higher than that of the accelerator pedal. Below are the relevant explanations: 1. Reasons why the brake pedal is higher than the accelerator pedal: This is primarily to minimize accidental pressing of the accelerator pedal and to enhance driving comfort. 2. Dimensions of the brake pedal being higher than the accelerator pedal: After comparing over ten models with floor-mounted accelerator pedals, including German brands (Volkswagen, Audi, BMW), Japanese and Korean brands (Hyundai, Kia), and domestic brands (Geely, Great Wall, Changan, BYD), the height difference between the brake pedal surface and the floor-mounted accelerator pedal surface generally ranges between 30~50mm.
16
2
Share

What is the function of the roof drain channel clip on the Mazda6?

The roof drain channel clip on the Mazda6 serves as a quick interface for installing roof racks. Below is some relevant information about the Mazda6: 1. Powertrain: The Mazda6 is equipped with two engines - a 2.0-liter and a 2.3-liter inline four-cylinder engine. The 2.3-liter four-cylinder engine utilizes Sequential Valve Timing (S-VT) and Variable Valve Timing (VVT) technologies, which significantly enhance engine performance, delivering more torque and greater power output. 2. Features: The vehicle comes with a card-type smart key, an 8-way power-adjustable driver's seat with 3 memory settings, xenon headlights, automatic headlight control, and headlight washers.
9
3
Share

What causes the insufficient power of Roewe 350?

When the engine power is used at high RPM, the noise becomes noticeable. The suspension is relatively stiff, and the steering system feels slightly heavy at low speeds. Here is the extended information about the Roewe 350: 1. Engine: The Roewe 350 is equipped with a 1.5L-VTi-Tech high-efficiency engine. Compared to the older 350 model, the Roewe 350 has undergone technical upgrades in fuel economy. By applying new technologies, improvements have been made to the chassis, engine, and transmission, reducing fuel consumption to only 6.9L, which is 12% lower than the older 350 model. The 2014 350 model added Tiptronic manual-automatic transmission technology, offering four driving modes: D, S, M, and W. 2. Features: Roewe has also added an ECO economy status reminder function. When the driver is in a fuel-saving driving mode, the "ECO" light illuminates, providing timely feedback on fuel consumption conditions and helping the driver develop good economical driving habits.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.