Where is the urea solution indicator light on Jiangling Transit?

2 Answers
OLena
07/28/25 4:01pm
Jiangling Transit urea solution indicator light is located on the dashboard. The following introduces the reasons for the urea indicator light to illuminate: 1. Insufficient urea solution level: Urea is the common name, and the formal name is diesel exhaust fluid. If the urea solution level is insufficient, the urea indicator light will illuminate. 2. Quality issues with the urea solution itself: Quality problems with the urea solution will cause issues with the urea light. 3. Problems with the exhaust treatment system: Malfunctions in the exhaust treatment system will also cause the urea indicator light to illuminate. 4. System damage: For example, nozzle blockage or catalyst poisoning failure. If this is the case, it will affect the exhaust concentration being too high, thereby impacting driving power and safety.
Was this review help?
8
1
Share
AnastasiaDella
08/11/25 11:07pm
I've been driving a Jiangling Transit for transportation, and the urea fluid indicator light is located on the dashboard, right in front of the driver's seat. It's yellow and shaped like a small dripping water icon, serving to alert you when the urea fluid is low or there's a system issue. Specifically, it's positioned behind the steering wheel, next to the tachometer and fuel gauge, easily visible with a glance down. If it lights up, don't ignore it—you need to add urea fluid promptly, otherwise the vehicle will enter a speed-limiting mode, which can affect long-distance hauling. It's wise to keep some urea containers on hand. When refilling, remember to turn off the engine to avoid splashing on your skin. Also, in winter, the fluid level can freeze, so check it more often to prevent false alarms from the light, which can be quite annoying.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What are the steps to replace the air filter in a Magotan?

Air filter replacement steps are as follows: 1. Open the engine hood and locate the air filter box. Some filter box covers are secured with screws, which can be loosened with a screwdriver; others are fixed with clips and can be opened directly. 2. Remove the old air filter, clean the filter box, and wipe the inside and outside of the filter box with a clean cloth. 3. Install the new air filter in its original position, paying attention to the correct orientation of the filter. 4. Reattach the filter box cover. Here is some related information: 1. The air conditioning filter ensures that the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. It separates solid impurities such as dust, pollen, and particulate matter from the air. 2. It also absorbs moisture, soot, odors, ozone, carbon dioxide, and other substances from the air, with strong and long-lasting moisture absorption. This provides clear visibility for drivers and passengers, enhancing driving safety. It supplies fresh air inside the vehicle, ensuring safe driving, sterilization, and deodorization.
17
0
Share

Where is the USB port on the Lynk & Co 01?

The Lynk & Co 01 has USB ports in both the center console and the armrest box. The music formats supported by the USB interface for multimedia playback vary. Most cars support MP3 and WMA formats. The USB ports in cars are designed for transmitting audio data. More details are as follows: 1. The current of the car's USB interface can be either 5V/2.1A or 5V/0.5A. Many mobile phones require an input current of 5V/1A, and the 5V/2.1A car USB interface is also suitable, providing 1A current for mobile phones and 2A current for tablets. 2. If the current is 5V/0.5A, it is obviously insufficient. In this case, charging a mobile phone will not only take a long time but also cause the phone to overheat. Generally, it is better to use a car charger. 3. A car charger is a device that converts the 12V from the cigarette lighter to USB's 5V, which can charge mobile phones and tablets; another type converts the 12V DC from the cigarette lighter to 220V AC, allowing the use of small power appliances when connected via an extension cord. 4. However, there is no need to unplug the car charger immediately after turning off the engine, as there is no current output unless electronic devices like mobile phones or iPads are connected, and even if there is, it is negligible.
3
1
Share

What is the top speed of the Kawasaki H2?

Kawasaki H2's theoretical top speed is 420 km/h at 16,000 rpm; currently, it achieves 400 km/h at 14,500 rpm. Here is more information about the Kawasaki H2: 1. The Kawasaki H2 is a high-performance motorcycle under the Kawasaki brand. 2. The Kawasaki H2 is equipped with a 998cc four-stroke supercharged engine. The supercharging technology can increase the engine's air intake without enlarging the engine displacement. 3. A motorcycle engine uses fuel and air as its energy sources. If the air intake is increased along with a corresponding increase in fuel injection, it effectively increases the amount of fuel mixture in the cylinders.
13
5
Share

How to Adjust the Headlight Height of Baojun 730?

Baojun 730 headlight height adjustment method is as follows: 1. Open the door and you can see the headlight height adjustment knob on the left side of the dashboard. 2. Turning the knob to the 0 position is the lowest height setting, turning it to the 1 position slightly raises the headlight height, turning it to the 2 position sets the light to a higher level, and turning it to the 3 position is the highest setting. Here is some information about car headlights: 1. Both high beam and low beam lights are used to illuminate the road ahead of the vehicle. 2. The difference is that one illuminates a shorter distance, while the other illuminates a longer distance.
2
5
Share

What does Volkswagen TSI280 mean?

280TSI meaning: 280 represents the approximate maximum torque of the engine. For domestic TSI engines, T stands for turbo, indicating turbocharging, S refers to stratified, and I stands for injection. Generally, TSI technology combines turbocharging and stratified direct injection technologies. Below are some relevant details: 1. This Volkswagen engine is a high-power version of a 1.4-liter displacement turbocharged engine. Volkswagen's new tail badges feature five designations: 180, 230, 280, 330, and 380, corresponding to the current 1.4L, 1.8L, and 2.0L displacement engines in Volkswagen's lineup. 2. 180 represents a 1.2L turbocharged engine, 230 represents a low-power engine, 300 represents a 1.8L turbocharged engine, 330 represents a 2.0L low-power engine, 380 represents a 2.0L high-power engine, 530 represents a 2.5L turbocharged engine, and 480 represents a 3.0L turbocharged engine.
4
3
Share

How to turn off the seat belt reminder in Haval F7?

Haval F7 seat belt reminder sound cannot be canceled. If you really need to turn off the sound, there are two methods: 1. Fasten the seat belt properly; 2. Try to insert a seat belt buckle into the seat belt buckle. Here is some information about car seat belts: 1. Car seat belts are devices used in cars to reduce passenger injuries when the car body is subjected to violent impacts. 2. Modern cars travel at high speeds. In the event of a collision, the passenger's body will continue to move forward due to inertia, hitting the car body inside the vehicle. In severe cases, it may break the windshield and fly out of the window.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.