Where is the trunk switch on the Mondeo?

2 Answers
LaKimberly
07/28/25 8:58pm
The trunk switch on the Mondeo is located above the license plate light on the trunk. There is a black piece of soft plastic, which is the electronic button switch for the Mondeo's trunk. Simply carry the key with you and press that button to open the trunk. Additionally, the Mondeo's trunk can also be opened using the car key or by pressing the unlock button on the inside of the driver's door. The Mondeo is a mid-size sedan produced by Ford Motor Company. The dimensions of this car are 4873mm in length, 1852mm in width, 1470mm in height, with a wheelbase of 2850mm. The Mondeo is equipped with two turbocharged direct-injection engines: 1.5GTDI and 2.0GTDI.
Was this review help?
13
1
Share
ORichard
08/12/25 1:40am
The location of the Mondeo's trunk release button varies by model year, but I can share common spots. As a long-time owner who's driven a Mondeo for years, the main switch is usually on the remote key fob—look for a trunk icon button to pop it open. Inside the car, you'll typically find it on the driver's door handle or near the center console—just feel around for a small button or lever. If these don't work, it might be a blown fuse or wiring issue, which isn’t hard to check yourself. I think this design is thoughtful for loading items, though keep kids from playing with it for safety. After years of driving, I recommend regular switch checks. If stuck, try the keyhole manual release or consult the manual to avoid roadside hassles.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Difference between GF-5 and GF-6 engine oil?

Engine oil GF-5 has a viscosity grade of 1000, while GF-6 has a viscosity grade of 5000, with the difference lying in their varying viscosity grades. Compared to ILSAC GF-5, the GF-6 specification offers numerous improvements. It maintains fuel economy and enhances engine durability, wear protection, prevention of low-speed pre-ignition (LSPI), reduction of timing chain wear, turbocharger deposit control, and sludge reduction. Stringent emission and fuel economy regulations drive changes in passenger car hardware system design and engine operating conditions, demanding higher performance from lubricants, including new dimensions of hardware protection. This means OEMs require more robust engine oils. These factors, along with the discontinuation of some current engine tests, are key drivers behind the development of the ILSAC GF-6 specification.
3
4
Share

What does a bright red P on the vehicle dashboard mean?

P light on indicates that the electronic parking brake is engaged. If the P light with a slash is illuminated, it indicates a malfunction in the electronic parking brake. In this case, drive with caution and visit a repair shop as soon as possible for inspection. Below is an introduction to the electronic parking brake system: 1. Introduction: Auto Hold is an automatic braking function. Once activated, for example, when stopping at a traffic light, it eliminates the need to pull the handbrake, simplifying operations by avoiding the use of a manual or electronic handbrake. For automatic transmission models, it also reduces the need for frequent shifting between D to N or D to P. 2. Difference from the handbrake: The electronic parking brake is an evolved version of the traditional handbrake, with no change in function, only the control method has shifted from a mechanical handbrake lever to an electronic button.
9
2
Share

How to distinguish between dry and wet dual-clutch transmissions in Volkswagen?

Methods to distinguish between dry and wet dual-clutch transmissions in Volkswagen: 1. Check torque and drive type: As long as the engine's maximum torque does not exceed 250nm (for Volkswagen, this can only be the 1.4T and 1.2T models), and it is not four-wheel drive, it is a dry dual-clutch transmission. All others are wet dual-clutch transmissions. 2. Volkswagen models labeled with 230 or 280 at the rear use dry dual-clutch transmissions, while those labeled with 330 or 380 use wet dual-clutch transmissions. The Volkswagen brand is always committed to providing customers with cutting-edge technological achievements, unique designs, and the best quality products in all automotive segments. Its car lineup includes not only mid-size and compact cars such as the Golf, Passat, Lupo, and Polo, but also top luxury vehicles like the Phaeton and Touareg.
9
2
Share

What is the difference between solid white lines and solid yellow lines?

The differences between solid white lines and solid yellow lines lie in their usage areas and the severity of penalties for violations. Different usage areas: Solid yellow lines are set in the center of the road to separate opposing traffic lanes and are not to be crossed. When solid yellow lines appear on both sides of the road, it indicates that temporary parking is not allowed. On the other hand, solid white lines are generally lane dividers. At intersections, solid white lines also serve as stop lines, while solid white lines on the sides of the road separate vehicle lanes from sidewalks, allowing for temporary parking. Different severity of penalties for violations: Crossing a solid white line is considered a lane violation, while crossing a solid yellow line is considered driving against traffic, which is a more serious offense. Illegal parking will result in a ticket, and if the driver cannot be contacted and the vehicle obstructs traffic, it may be towed away.
5
3
Share

What are the causes of coolant boiling?

The causes of coolant boiling: 1. High-temperature weather leading to coolant boiling; 2. Overloaded operation of the air conditioning system; 3. Failure of cooling components causing coolant boiling. Coolant boiling usually refers to the situation where the working temperature of a car engine exceeds the normal operating temperature range, affecting the machine's normal operation and potentially damaging it. The boiling temperature of coolant is generally above 85 degrees Celsius, with different models having different standards. The higher the temperature exceeds the normal range, the greater the damage to the machine. Regularly check if the cooling fan is working properly, if there are any coolant leaks in the radiator, and if the coolant level is sufficient. If the radiator is leaking, it should be repaired or replaced promptly. If the coolant level is low, it should be replenished in time. If the coolant appears cloudy or deteriorated, it should be replaced.
13
4
Share

How to Reset the Tire Pressure Light on Volkswagen Tayron?

Method to reset the tire pressure light on Volkswagen Tayron: 1. Power on the car and turn on the ignition switch; 2. Use the buttons on the multifunction steering wheel to find the settings interface on the car dashboard, then press the OK button to enter the settings; 3. Use the steering wheel buttons to navigate to the maintenance option, then press the OK button to enter the interface; 4. Locate the reset option on the interface and press the OK button; 5. A confirmation interface for resetting the maintenance cycle data will appear on the dashboard menu. Press the OK button to reset the car's tire pressure. After confirming, return to the main menu interface to check if the tire pressure reset is complete. The Tayron is the second SUV launched by FAW-Volkswagen. Compared to the T-Roc, this car features a longer body size and increased interior space, providing an additional option for users with higher space requirements.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.