···
Log in / Register

What are the length, width, and height dimensions of the Highlander?

6Answers
SanAbel
07/28/2025, 09:52:45 AM

The body dimensions of the Highlander are: 489019251715mm (lengthwidthheight). Below are detailed introductions: 1. Introduction: The Highlander is a vehicle produced by Toyota, a large-sized SUV in the Toyota family. It features a spacious body with innovative and roomy interior space. Moreover, the Highlander comes equipped with the highest standard safety features in its class. 2. Exterior: The Highlander boasts a fashionable and noble appearance, elegant and grand. The triangular headlights, hexagonal angular front grille design, integrated Toyota emblem, thick chrome decorations, fog lights embedded with chrome elements, and slightly forward-leaning front styling give the entire front face a fashionable and three-dimensional look. The robust waistline running from the front to the rear, protruding fenders, black side skirts, and chrome door sills make the body appear solid, elongated, and dynamic.

Was this review help?
119
Share
VanCayden
08/11/2025, 02:27:24 PM

I've been driving the Highlander for many years, and the size of this SUV is often asked about. The official data shows a length of 4965 mm, width of 1930 mm, and height of 1770 mm, making it super practical as a family car. With ample space, it's more than enough for traveling with two kids, but parking requires some caution, especially when finding a spot in the city can be tricky. At nearly 5 meters in length and quite wide, it offers stable cornering and good visibility. In terms of height, getting in and out is easy without any pressure, and the interior capacity is sufficient, so there's no worry about luggage space. Overall, the size is well-designed, but it's wiser to avoid narrow streets and alleys while driving to prevent scratching the body.

Was this review help?
14
Share
Expand All
JaceMarie
09/28/2025, 10:38:18 PM

As a frequent business traveler, the Highlander is my daily commuter. It measures 4965mm in length, 1930mm in width, and 1770mm in height, offering a spacious and comfortable interior where three adults can sit in the back without feeling cramped. These dimensions make it particularly convenient for cargo, easily accommodating briefcases or samples with room to spare. Its height is significantly greater than sedans, ensuring no worries about water accumulation during rainy drives. The downside is its width, requiring slower turns on narrow roads, though the rearview camera is a big help. Overall, the size is well-balanced, making daily use hassle-free and efficient, especially for comfortable family outings on weekends.

Was this review help?
19
Share
Expand All
PaigeDella
11/11/2025, 11:33:46 PM

As one of the Highlander owners, I clearly remember the vehicle dimensions: 4965mm in length, 1930mm in width, and 1770mm in height. These dimensions enhance the driving experience with a spacious interior that prevents leg fatigue. The ample width ensures stable turns, while the height provides good visibility with minimal blind spots. Parking can be slightly challenging at first, but you get used to it. The size data matches daily needs well, making it a great choice.

Was this review help?
17
Share
Expand All
LaMargaret
01/02/2026, 01:16:32 AM

As a seasoned driver, I must say the Highlander's dimensions are 4965mm in length, 1930mm in width, and 1770mm in height. These measurements provide exceptional safety, with excellent rollover prevention and broad visibility. The wide body ensures stability and reduces skidding, while the length accommodates impact-absorbing structures to protect passengers. Although the large size may pose parking challenges in tight spaces, it's manageable in spacious parking lots. The generous interior offers ample room for comfortable family trips without feeling cramped. While the dimensions do affect fuel consumption, it remains within reasonable control.

Was this review help?
8
Share
Expand All
AdrielDella
03/30/2026, 02:14:19 AM

When choosing a car, I prioritize size. The Highlander measures 4965 mm in length, 1930 mm in width, and 1770 mm in height. The spacious interior is ideal for long-distance travel, though its slightly higher fuel consumption should be noted. The width ensures stability, the height facilitates easy entry and exit, and the length affects cargo capacity. Parking can be challenging at first, but you'll get used to it. Overall, its dimensions offer strong practicality.

Was this review help?
3
Share
Expand All
More Q&A

What to Do If Your Driver's License Has Been Overdue for Review for More Than One Year?

You need to pass the subject one exam to restore your original driving qualification, and you cannot drive a motor vehicle before restoration. Here are the relevant introductions about overdue review: 1. Notes: The applicant should take the road traffic safety laws, regulations, and related knowledge exam. Four photos of the motor vehicle driver. The original copy of the "Motor Vehicle Driver Physical Condition Certificate" issued by a medical institution. 2. Application materials: The applicant should take the road traffic safety laws, regulations, and related knowledge exam, commonly known as subject one, and pass the exam within two years after the cancellation of the motor vehicle driver's license.
113
Share

Why Does a Car Compressor Fail?

Introduction to the main causes of compressor damage: 1. The air conditioning system is not clean, and granular impurities are sucked into the compressor; 2. Excessive refrigerant or lubricating oil in the system causes "liquid hammer" damage to the compressor; 3. The compressor operates under long-term high temperature and high pressure harsh conditions; 4. Severe oil shortage in the compressor leads to excessive wear; 5. The electromagnetic clutch of the compressor slips, causing excessive friction temperature; 6. The power configuration of the compressor is too small. The following are the measures to avoid air conditioning compressor failures: 1. Avoid using the air conditioning system for a long time when the car is idling; 2. Ensure that the refrigerant is not overfilled during car air conditioning maintenance; 3. Do not continue to use the air conditioning system after any abnormality is detected.
109
Share

What are the symptoms of water ingress in the Magotan transmission?

The symptoms of water ingress in the Magotan transmission include experiencing slight jerking sensations during gear shifts while driving, which gradually intensify over time. Upon opening the coolant reservoir, oil stains may be observed inside. When draining the transmission fluid, it may appear entirely milky white. Below is an analysis of the causes of water ingress in the Magotan transmission: 1. Internal corrosion and leakage of the transmission cooler: Transmission fluid enters the cooling system and mixes with the coolant, causing the coolant to contaminate the transmission fluid and turn it milky white. The deteriorated transmission fluid leads to issues such as jerking and slipping during gear shifts. 2. Forced driving through water during the rainy season: Also known as wading, when the water depth reaches two-thirds of the wheel height, water can easily enter the transmission.
105
Share

What are the yellow dots on the car?

The yellow dots on the car are caused by metal dust adhering to the body and rusting over time. Methods to remove and prevent yellow dots: For small localized areas, use a damp towel to scrub firmly; if the damp towel doesn't work, purchase a cleaning wax, apply it to the towel, and gently wipe to remove the dots. When yellow dots appear in large areas, visit a car detailing shop for polishing and waxing to eliminate them. Regularly washing the car to remove dust, iron particles, and other debris from the paint surface can help protect the paint from corrosion to some extent. Reduce exposure to direct sunlight by parking indoors; if parking outdoors is unavoidable, install a car cover or canopy to shield the vehicle.
110
Share

What gear should an automatic transmission car be in when it enters water?

For an automatic transmission car entering shallow water, you can keep it in D gear; for deep water, shift to L gear. Below is a detailed introduction to the car gears: 1. R gear (Reverse gear): When this gear is engaged, the hydraulic system connects the reverse oil circuit, causing the drive wheels to rotate in reverse for backward movement. Do not forcibly shift to "R" gear when the vehicle is not completely stopped, as it may damage the transmission. 2. N gear (Neutral gear): When in neutral, the planetary gear system idles without power output. 3. D gear (Drive gear): When the gear shift lever is in this position, the hydraulic control system automatically connects the corresponding forward gear oil circuit based on throttle opening and vehicle speed signals, enabling automatic shifting with speed changes for automatic transmission functionality. 4. P gear (Parking gear): Uses a mechanical device to lock the rotating parts of the car's tires, preventing the vehicle from moving. 5. L gear (Low gear or Digital limit gear): The transmission can only switch between limited gears. "1" or "L" is the lowest gear of the transmission, typically used only when extremely strong power is required, such as climbing steep slopes or towing heavy vehicles.
110
Share

How to Use the S Gear in an Automatic Transmission Properly?

Generally, this gear is mostly used when overtaking. Essentially, this gear delays upshifting without altering other operational aspects. It is not recommended to use this gear frequently as using the S gear will increase fuel consumption. Below is a detailed introduction to specific car gears: P gear is the parking gear: When the gear lever is in the P gear position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this point, the car will remain stationary even without pressing the brake, and it is generally used for long-term parking. When shifting into P gear, the car must be completely stationary. Do not shift into P gear before the car has come to a complete stop, and always engage the handbrake. When parking on a slope, engage the handbrake first before shifting into P gear. R gear is the reverse gear: When the gear lever is in the R gear position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When shifting into R gear, the car must be completely stationary. Do not shift into R gear before the car has come to a complete stop. N gear is the neutral gear: When the gear lever is in the N gear position, the gears inside the transmission are in idle mode, and the clutch is not engaged, resulting in minimal load on the transmission. N gear is generally used for short-term parking. Additionally, when towing the car, the transmission should be placed in N gear. D gear is the drive gear: When the gear lever is in the D gear position, the gears inside the transmission automatically shift between the lowest and highest gears based on factors such as vehicle speed and throttle opening, following preset shifting patterns. In the vast majority of cases, D gear can be used for driving.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.