Where is the trunk switch of BYD S6?

1 Answers
McJustin
07/29/25 4:22pm
The trunk switch of BYD S6 is located under the driver's seat. Pull the trunk switch under the driver's seat, and then you can manually open the trunk. In addition, the trunk can also be opened with the remote control and the key. Small storage compartments of BYD S6: The small storage compartments inside the S6 are excellent, with places to store personal items almost everywhere, and the locations are obvious. The rear armrest has a good texture and can also serve as a cup holder. Storage space of BYD S6: In terms of storage space, the BYD S6 first takes advantage of its own space advantage, so there is no need to sacrifice corresponding storage space due to space limitations. Moreover, more user-friendly adjustments have been made in the details, and it can be said that everything that should be there is there.
Was this review help?
18
5
Share
More Forum Discussions

What is the curb weight of the Golf 7 in tons?

The curb weight of the Golf 7 is 1.31 tons. General curb weight of cars: Sedans typically weigh around 1.5 tons. Most family cars range between 1.2 to 1.3 tons, mid-to-high-end cars between 1.4 to 1.6 tons, while heavier cars can weigh between 1.8 to 2.0 tons. Excessive body weight can lead to higher fuel consumption, poorer handling, slower acceleration, and increased braking distance. Factors affecting a car's curb weight: A car's weight is largely influenced by its engine displacement and length, including the materials used. Generally, cars with smaller displacements use lighter engines. Compact cars are lighter than larger vehicles, and differences in the use of chassis, tires, soundproofing materials, and seat materials can all contribute to variations in a car's weight.
14
3
Share

What is the appropriate tire pressure for a Volkswagen Lavida?

The appropriate tire pressure for a Volkswagen Lavida is 2.3-2.5 bar. Here are some details: Both overinflation and underinflation can shorten the lifespan of the tires. 1. Underinflation increases tire deformation, leading to sidewall cracks, excessive heat buildup, rubber aging, increased contact area, and accelerated shoulder wear. 2. Overinflation causes excessive stretching of the tire cords, reduces tire elasticity, and increases the load on the vehicle while driving. Additional information: There is no fixed standard value for tire pressure. If categorized seasonally, summer tire pressure typically ranges between 2.2-2.5 bar, while in winter, it is advisable to increase the standard tire pressure by approximately 0.2 bar. However, as temperatures and road surface temperatures rise, especially during high-speed or long-distance driving, tire pressure can easily increase, increasing the risk of a blowout. For safety, it is recommended to stop and reduce the pressure in such situations.
15
1
Share

What is the Difference Between Drifting and Fishtailing?

Drifting and fishtailing are different in the following ways: Fishtailing: Fishtailing occurs when the vehicle is not out of control. At the turning point of a curve, the front wheels act as the dynamic pivot point for steering, while the rear of the car slides dynamically, aligning the vehicle's posture with the exit direction of the curve. It resembles a flat sector shape, where the vertex is the front of the car, the two sides represent the initial and final postures of the fishtail, and the arc is the sliding path of the rear. Drifting: Drifting, on the other hand, involves adjusting the car's posture to align with the exit direction of the curve upon entry, maintaining this posture until the drift ends, and utilizing the car's speed and inertia to slide through the curve. In this state, there is no fixed dynamic pivot point; instead, the entire car dynamically slides along the optimal path for the curve. During a drift, it feels as though the car is sliding sideways on ice.
8
5
Share

How to Turn Off the Auto Start-Stop Function in BMW X3?

To deactivate the auto start-stop function in the BMW X3, simply press the A OFF button manually. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. More details about the BMW X3 are as follows: 1. Taking the 2021 BMW X3 as an example, it is a mid-size 5-door, 5-seat SUV with body dimensions of 4717mm in length, 1891mm in width, and 1689mm in height, a wheelbase of 2864mm, and a fuel tank capacity of 65 liters. 2. The 2021 BMW X3 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 135 kW at 5000 to 6500 rpm and a maximum torque of 290 Nm at 1350 to 4250 rpm.
8
4
Share

Replacing the Position Light on a Focus

Ford Focus position light replacement method is as follows: 1. First, unscrew the headlight screws; 2. Then use a flathead screwdriver to twist open the base and remove the bulb holder from inside the headlight assembly; 3. Insert the new position light and repeat the above steps. It is recommended to have the installation performed at a 4S dealership or professional repair shop. More information about the Focus: 1. The entry-level engine displacement of the new Focus has been reduced from the previous 1.8L to 1.6L. However, due to the adoption of more advanced technologies, the maximum power is only reduced by 1kW to 91kW/6500rpm, while the maximum torque has even increased by 2N•m to 159Nm/4000rpm. 2. According to the comprehensive fuel consumption data released by the Ministry of Industry and Information Technology, the new Focus 1.6L model has a comprehensive fuel consumption of less than 7L/100km, specifically 6.2L-6.4L/100km.
10
5
Share

Where is the Pajero water pump located?

The Pajero water pump is located inside the engine block. The functions of an automobile engine water pump are as follows: 1. Pressurization: The automobile water pump pressurizes the coolant to ensure its circulation within the cooling system. In simpler terms, it continuously circulates water through the radiator and engine block components to carry away heat, preventing the engine from overheating. 2. Cooling: Inside the engine block, there are multiple water passages for coolant circulation. These passages connect to the radiator (commonly known as the water tank) at the front of the vehicle via hoses, forming a large water circulation system. At the engine's water outlet, a water pump is installed, driven by the fan belt, to pump out hot water from the engine block passages and pump in cold water. 3. Heat dissipation: Next to the water pump, there is also a thermostat. When the engine is first started (cold engine), the thermostat remains closed, preventing coolant from flowing through the radiator and only circulating within the engine (commonly known as a small loop). Once the engine temperature reaches above 80 degrees, the thermostat opens, allowing hot water from the engine to be pumped into the radiator. The cold air from the moving vehicle then passes through the radiator, carrying away the heat.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.