Where is the trunk switch located in the Tayron?

1 Answers
ElleLynn
07/29/25 8:47pm
Tayron's trunk switch is located on the left front door trim panel. Here are the specific methods for opening the trunk: 1. Remote key fob outside the car: The most common way to open the trunk from outside is by using the remote key fob. Simply press the trunk release button (usually marked with a car trunk icon) on the key fob to open the trunk. Some car models may not have a dedicated trunk button on the key fob, in which case pressing the unlock button will also open the trunk. 2. Interior control switches: Interior controls include button-type and lever-type switches. The location of button-type switches may vary depending on different manufacturers and models, but they are generally located on the left side of the steering wheel or in the central control area. For example, in the Sagitar, the trunk button is usually located on the door. Some models use a lever instead of a button, which is typically located on the lower left side of the driver's seat or the lower left side of the steering wheel.
Was this review help?
1
4
Share
More Forum Discussions

What is the fuel consumption of the Bentley Bentayga?

The fuel consumption of the Bentley Bentayga is 12.0L/100KM. The currently available Bentley Bentayga models include the 2022 4.0T V8 and the 2022 4.0T V8 S. In the same class, the Mansory Range Rover 2020 3.0T Black Carbon has a combined fuel consumption of 8.8L/100KM. Factors affecting vehicle fuel consumption: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before traffic lights, increases fuel consumption. Vehicle characteristics: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power output, requiring more gasoline for combustion. Vehicles with greater weight also tend to have higher fuel consumption because greater weight demands more driving torque.
5
2
Share

Why is NIO associated with JAC Motors?

This is because all of NIO's vehicle models are produced by JAC Motors under contract manufacturing. Contract Manufacturing Model: In December 2018, the Ministry of Industry and Information Technology (MIIT) officially recognized the contract manufacturing model at the policy level in the 'Administrative Measures for the Access of Road Motor Vehicle Manufacturers and Products.' However, it also imposed certain requirements on companies opting for contract manufacturing. For instance, new automakers without production qualifications must first manufacture 30,000 vehicles through contract production before they can apply for qualifications and build their own factories. Therefore, NIO, lacking automotive production qualifications, had to choose a contract manufacturer to fulfill the 30,000-unit production requirement before proceeding with subsequent operations. NIO's Technology: Apart from the production qualifications provided by JAC, most of the technology originates from NIO itself. NIO established its China headquarters in Hefei, setting up research and development, sales, and production bases to create an operational system centered in Hefei. The manufacturing processes also differ significantly from JAC's production standards.
8
5
Share

What does the ESC malfunction warning mean?

When a car displays an ESC system malfunction warning, it means there is a fault in the Electronic Stability Control system, and the vehicle's electronic stability control is not functioning. This fault can be triggered by software system alarms, or it may be caused by sensor failures or short circuits in the wiring. Diagnosing the issue can be complex, so it's important to visit a 4S dealership promptly for inspection and repair. The role of the ESC system: When the ESC system is activated to correct vehicle stability, it reduces the speed, so pay special attention to road conditions. The ESC system is only a supplementary safety feature for the vehicle. If the car's instability exceeds physical limits, it cannot be controlled. Do not rely solely on the system—always drive safely. When the ESC is active, you may hear some noise from the brake pedal or feel slight vibrations in the corresponding systems. These are caused by pressure changes within the system. Overview of the ESC system: ESC is an Electronic Stability Control system and a supplementary safety system that helps prevent dangerous situations. During sharp turns or lane changes when the vehicle becomes highly unstable, it compensates for stability by applying the wheel brakes or controlling engine torque.
18
3
Share

Are Large Vehicle Tires Tubeless?

Large vehicle tires are not necessarily all tubeless; most use steel-belted tires. The specific reasons are as follows: Tubeless tires have poor load-bearing capacity. Large trucks, with cargo and their own weight, typically weigh at least 20 tons, which tubeless tires cannot support. Steel-belted tires, on the other hand, can handle varying loads without issues and have a longer lifespan. Steel-belted tires feature a fine steel wire mesh within the tire's rubber layers, along with an inner rubber tube, enhancing the tire's load-bearing capacity. Methods to identify whether a large vehicle uses tubeless tires: Method 1: Valve. A tubeless tire has a rubber seal underneath for sealing, whereas a regular tire has a screw. Method 2: Inflation. A tubeless tire consists of only one outer layer. When inflated, the inner ring tightly expands onto the rim, defining a tubeless tire. Since tubeless tires lack an inner tube, the air intake is on the rim, allowing direct inflation through the rim. Method 3: Lettering. The sidewall of a tubeless tire will be marked with "TUBELESS" or "TL."
11
5
Share

What Causes Cracks on the Side of Tires?

Tire sidewall cracks can be caused by: 1. Natural aging—prolonged exposure to sunlight and weather conditions leads to rubber degradation, resulting in cracks over time; 2. Impact damage—frequent driving on rough or gravel roads may cause minor impacts. While slight damage is generally safe, severe impacts require immediate tire replacement. As a critical automotive component, tires directly contact the road surface and work with the suspension system to absorb shocks, ensuring ride comfort and smooth driving performance.
6
2
Share

What Causes the Emission System Fault Light to Illuminate?

The reasons for the emission system fault light to illuminate include: 1. Poor fuel combustion state, where fuel is not burned or burns incompletely, causing engine knock and excessively high internal engine temperatures; 2. Poor fuel quality, leading to unclean engine cylinders and accumulated carbon deposits; 3. Faults in the oxygen sensor itself or its wiring, or faults in the sensor control unit. If this fault light comes on while driving, it indicates that the engine parameters will change, and the engine may lack power or shake severely. In such cases, it is necessary to visit a nearby repair service station for engine inspection and maintenance. If this issue is not resolved promptly, the engine combustion state will not return to normal.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.