Where is the transmission oil inspection port on the Peugeot 308?

What does the dm1 fault code mean?

dm1 fault code indicates an engine malfunction in the vehicle, which requires prompt inspection and repair. Below is detailed information about automotive engines: Overview: Depending on the power source, automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems. The automotive engine is the device that provides power to the vehicle, determining its performance, fuel efficiency, stability, and environmental friendliness. Others: Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, capable of converting the chemical energy of fuel into mechanical energy for piston movement and delivering power output. Gasoline engines feature high rotational speeds, lightweight construction, low noise levels, easy starting, and lower manufacturing costs. Diesel engines have higher compression ratios, superior thermal efficiency, and better fuel economy and emission performance compared to gasoline engines.

14

3

Share

What Happens to Car Brakes After Long-Term Inactivity?

Long-term inactivity of a car means the brakes are not used for an extended period, which may lead to wear or aging of the brake system. Below is a detailed introduction about car brakes: Overview: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. Brake Pads: Car brake pads, also known as brake linings, refer to the friction materials fixed on the brake drum or disc rotating with the wheels. The friction linings and blocks bear external pressure to create friction, thereby achieving vehicle deceleration.

16

4

Share

Which country is the manufacturer of Victoria motorcycles?

Victoria motorcycles are from Germany. Here are some relevant introductions about Victoria motorcycles: Appearance: The appearance of the Victoria Sixties 150 is basically the same as the 250 model, featuring the Sixties with a European retro style. Configuration:

6

2

Share

Are r415b and r134a interchangeable?

r415b and r134a are interchangeable under certain circumstances. r415b and r134a are models of automotive refrigerants. Below is a detailed introduction about automotive refrigerants: Overview: Automotive refrigerants are suitable for non-environmentally friendly car air conditioners. Because R12 has a serious destructive effect on the atmospheric ozone layer and produces a greenhouse effect, endangering the environment on which humans depend, it has been banned. Others: R404A refrigerant is a blended refrigerant composed of HFC substances, containing no ozone-depleting substances, with an ODP value of zero. It is the most important medium-to-long-term substitute for R502 refrigerant. R404A is suitable for low-temperature refrigerated trucks.

4

3

Share

What is the tire pressure for a 125cc motorcycle in bar?

The front tire pressure should be maintained at 2.0 bar, and the rear tire pressure should be maintained at 2.5 bar. Each tire has its maximum pressure limit. If the pressure exceeds this specified value, there is a risk of a tire blowout. Conversely, if the tire pressure is too low, the tire will wear out prematurely. Therefore, the tire pressure must be adjusted in combination with the maximum pressure value of the tire grade. Typically, the maximum pressure for motorcycle tires is 280 kPa, which is approximately equal to 2.8 bar. Tire pressure is critical for motorcycles. Whether the pressure is too high or too low, it will shorten the tire's lifespan. Low pressure can cause increased deformation of the tire body, leading to cracks on the tire sidewalls, and it will also increase the tire's contact area with the ground, accelerating wear on the tire shoulders. High pressure can cause excessive stretching and deformation of the tire cords, reducing the tire's elasticity and increasing the load on the motorcycle while driving. If impacted, it may result in internal cracks or even a blowout. Additionally, high pressure accelerates wear on the tire tread and reduces puncture resistance. Generally, the tire pressure for the front wheel of a motorcycle should be between 170-200 kPa, and the rear wheel should be between 200-220 kPa. The rear wheel of a motorcycle bears more weight, so it should feel firm when pressed after inflation. It is best to use a tire pressure gauge for measurement. Typically, the front wheel pressure should be around 170 kPa, and the rear wheel pressure should be between 200-220 kPa. The standard tire pressure values are usually specified in the vehicle's manual. This is because tire pressure settings primarily consider factors such as the vehicle's weight and chassis height, and are not necessarily related to the brand of tires used. Unless specified by the manufacturer, no special adjustments are needed in winter or summer. However, it is recommended to measure tire pressure at room temperature.

7

1

Share

What Does the Three Guarantees in 4S Stores Refer To?

4S store's "Three Guarantees" for automobiles is a shorthand for retail businesses implementing "guarantees for repair, replacement, and refund" on their sold products. Below are the detailed contents regarding the "Three Guarantees": Guarantee for Repair: During the "Three Guarantees" period, any malfunction caused by automobile product quality issues will be given free repair after technical appraisal by the "Technical Service Center" or "Authorized Service Station". Guarantee for Replacement: During the "Three Guarantees" period, if irreparable quality issues occur, after appraisal by the "Center" or "Authorized Station", qualified parts or assemblies can be replaced free of charge. Guarantee for Refund: During the "Three Guarantees" period, if major quality issues arise and the product still fails to meet the main technical performance indicators after the first two treatments, upon the user's written request for a refund and confirmation by the "Center", the seller can process the vehicle return after charging depreciation fees based on its usage time and mileage.

14

0

Share

Where is the transmission oil inspection port on the Peugeot 308?

What does the dm1 fault code mean?

What Happens to Car Brakes After Long-Term Inactivity?

Which country is the manufacturer of Victoria motorcycles?

Are r415b and r134a interchangeable?

What is the tire pressure for a 125cc motorcycle in bar?

What Does the Three Guarantees in 4S Stores Refer To?

What are the reasons why the left front door lock of the Haval H6 cannot be opened from inside or outside?

How to reset the maintenance light on Zotye T600?

What is the c1201 engine/EV control system fault?

Can the Diesel Engine Starter Motor Be Repaired?