Where is the tire pressure display for the 2020 Passat?

1 Answers
StJourney
07/24/25 8:07pm
2020 Passat's tire pressure is displayed on the central screen of the instrument panel. The monitoring methods are as follows: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It transmits the pressure information from inside the tire to a central receiver module via a wireless transmitter, then displays the pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors the tire pressure. The indirect tire pressure warning system essentially relies on calculating the rolling radius of the tires to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data on the actual pressure in all four tires as a direct system does.
Was this review help?
5
2
Share
More Forum Discussions

What is the normal temperature range for the Nissan Teana's coolant temperature gauge?

Nissan Teana's normal operating temperature ranges between 80-90 degrees Celsius. 1、Note: When starting the engine, the coolant temperature gauge reading should not be lower than 50°C; during normal vehicle operation, the proper gauge reading should remain between 70°C~90°C. 2、Effects of overheating on the engine: Thermal expansion of engine components will reduce clearance between moving parts, accelerating engine wear. Overheating also decreases oil viscosity, further increasing component wear and reducing engine lifespan. This may cause cylinder head gasket failure, resulting in cross-contamination between coolant channels, oil passages, and combustion chambers - allowing oil to enter the radiator and coolant to mix with engine oil.
13
3
Share

Which Year's Cars Comply with China IV Emission Standards?

China IV emission standards apply to vehicles manufactured between 2011 and 2017. Below is relevant information about China IV emission standards: 1. Definition: China IV emission standards represent the national fourth-phase limits for motor vehicle pollutant emissions. Major automotive pollutants include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. These standards require controlling and reducing vehicle emissions below specified thresholds through technologies such as improved catalytic converter active layers, secondary air injection systems, and cooled exhaust gas recirculation systems. 2. Existing Issues: While promoting environmental protection and energy conservation remains a key national policy, significant challenges to corporate interests inevitably encounter resistance. As state-owned enterprises, Sinopec and PetroChina cannot be effectively constrained by governmental "standards". Consequently, emission control pressures primarily target more market-oriented automobile manufacturers, which explains why the automotive industry bears disproportionate responsibility for emission compliance.
2
3
Share

How to restart the 2020 Audi MMI?

2020 Audi MMI restart method: Simultaneously press the SETUP button and the button in the upper right corner of the large knob, then press the large knob. MMI is the multimedia interactive system developed by Audi. It ingeniously integrates the operation of all infotainment components in one display and operating system. Through simplified controllers and unified logic, MMI enables quick, convenient, and intuitive access to a wide range of functions and technologies. The Audi A4L is a mid-size car under FAW-Volkswagen Audi. Taking the 2020 35TFSI Fashion Dynamic model as an example, the car features a 4-door, 5-seat sedan structure with body dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, a wheelbase of 2908mm, a fuel tank capacity of 56 liters, and a curb weight of 1610kg.
18
0
Share

Is Lexus Full Lineup Free Maintenance?

Lexus offers free maintenance for its full lineup. Below are the relevant details: 1. Related Policies: All gasoline models under the Lexus brand can enjoy a free warranty and maintenance policy for 4 years or 100,000 kilometers, while hybrid models can enjoy a free warranty and maintenance policy for 6 years or 150,000 kilometers. Moreover, warranty and maintenance services are free at any Lexus 4S dealership nationwide as long as they are within the policy period. This essentially eliminates all concerns about hybrid technology. 2. Note: Lexus provides free semi-synthetic engine oil for maintenance; those who wish to use full-synthetic engine oil will need to pay for it themselves.
14
0
Share

What is the method to reset the maintenance light on a Santana?

Santana maintenance light reset method is: 1. With the ignition switch turned off, press and hold the reset button on the right side of the instrument panel with your left hand while turning on the ignition switch; 2. After turning on the ignition switch, continue holding the reset button with your left hand until the maintenance light enters reset mode, then release the right-hand reset button; 3. Within 20 seconds of releasing the right button, press the left menu button once to confirm the reset. Taking the 2021 Santana as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8l, and trunk capacity 466l.
4
4
Share

How Long Can You Drive After the Maintenance Light Comes On?

You can drive approximately 500 kilometers after the vehicle maintenance light comes on. The maintenance tasks include: 1. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires; 2. Inspecting the vehicle chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 3. Replacing the engine oil and oil filter, cleaning the air filter, and checking whether the generator belt and wiper blades are damaged; 4. Checking whether the levels of various fluids are normal; 5. Inspecting whether all switches and lights are functioning properly. Maintenance precautions include: 1. Making an appointment in advance; 2. Recording any faults or questions encountered while driving and informing the staff during the maintenance registration.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.