Where is the start-stop switch of Fengshen AX7?

What should you pay attention to when buying a used car?

Precautions for buying a used car: 1. Choose a reliable channel: Currently, the used car trading market is one of the most secure channels for used car transactions. The used car trading market has two main characteristics: first, it is supervised by government departments, ensuring higher operational and transactional standards; second, it offers one-stop services, handling everything from the transaction to the transfer process, making it very convenient. 2. Choose an appropriate mileage: Due to the phenomenon of odometer tampering, many people believe that mileage is not reliable. However, in the absence of tampering, mileage is a significant factor in selecting a car. For mid-to-low-end models, cars with a mileage of 50,000 to 70,000 kilometers generally have good condition. For high-end models, even if the mileage exceeds 100,000 kilometers, there is usually no major issue. However, nearly new cars with less than 10,000 kilometers are often traps. 3. Choose a used car with both good condition and price: In the used car market, there are usually multiple vehicles of the same model with varying conditions, some even with similar conditions. Therefore, after finding a used car you like, don’t rush to buy it. First, compare it with other similar models in similar conditions to find the one with the best combination of price and condition before making a purchase.

15

3

Share

What Are the Reasons for Insufficient Oil Pressure in a Car?

Engine oil pressure insufficiency may be caused by: 1. Wear of the oil pump, or wear/foreign objects in the pressure relief valve. 2. Cracks in the connecting pipe from the oil pump to the cylinder block, or damage to the gasket. 3. Damage to the pressure relief valve in the oil filter housing. 4. Clogged oil filter element. 5. Excessive clearance in the camshaft bearings. 6. Excessive clearance in the timing gear set. Troubleshooting methods: 1. Park the vehicle on level ground, pull out the dipstick, check if the oil level is too low, and add sufficient lubricating oil if needed. 2. Observe the color of the lubricating oil on the dipstick. If it appears milky white, this indicates that the lubricating oil has deteriorated due to water contamination, leading to reduced viscosity and lower oil pressure. The oil should be replaced. 3. Remove the oil pressure sensor and install an oil pressure test gauge. If the measured oil pressure reaches the specified value but the oil pressure gauge indicates low pressure (or the oil warning light remains on), the oil pressure sensor or gauge may be faulty. Replace with a new oil pressure sensor and start the engine to idle. If the oil pressure gauge indicates normal pressure (or the warning light turns off), the oil pressure sensor was faulty. If the issue persists, it indicates a faulty oil pressure gauge.

4

0

Share

What does it mean when a car has its hazard lights on all the way?

The following is an introduction to cars with hazard lights on all the way: 1. Temporary parking due to vehicle breakdown on the highway: If a car breaks down on the highway and needs to be parked on the roadside, a triangular warning sign should be quickly placed behind the car, and the hazard lights must be turned on. This is mainly to alert vehicles behind that there is a car breakdown ahead, so they must slow down and detour. 2. When visibility is too low, such as during foggy conditions: When driving in heavy fog, snowstorms, or heavy rain with very low visibility, especially when visibility is less than 100 meters, it is essential to turn on the hazard lights. 3. During vehicle towing: When a vehicle breaks down and needs to be towed, both the towing vehicle and the towed vehicle must have their hazard lights on. This is because the towed vehicle cannot be controlled flexibly, so the speed should be reduced to the minimum, and surrounding vehicles should be constantly reminded to give way.

7

0

Share

Will the Accord chassis be damaged if it is hit?

The chassis of the Accord being hit generally won't cause any issues as long as the speed was low during the impact and the collision sound was not loud. If a loud noise occurs during the collision, it may cause the oil pan to dent or even puncture. The oil pan is where the engine oil is stored. If it is punctured and leaks oil, the engine will suffer from insufficient lubrication, leading to phenomena such as cylinder scoring, weak car performance, difficulty accelerating, elevated engine temperature, and unstable RPM. Common causes of chassis scraping: 1. Uneven roads, surfaces with many grooves or potholes: Such roads primarily damage the front bumper, suspension, and tires. Solution: Slow down and drive cautiously, avoid such roads whenever possible, observe road conditions, and estimate your car's ground clearance to steer clear in advance. 2. Being scratched by debris when crossing road surfaces: In this case, the most vulnerable parts are the oil pan and suspension, which can easily lead to oil pan rupture. Solution: Keep your vision focused farther ahead while driving, spot debris early, and try to avoid it.

15

1

Share

Where is the tire pressure reset button for Geely Vision?

Geely Vision X6's tire pressure monitoring reset button is located on the right side of the vehicle's steering wheel. Additional related information is as follows: 1. Tire pressure: The status of the tire pressure can be viewed through the tire pressure monitoring item on the instrument panel of the Vision X6. Normally, the vehicle's tire pressure between 2.3PA and 2.5PA is considered normal. If the tire pressure is abnormal, the vehicle will issue a warning reminder. After checking and restoring the tire pressure to normal levels, the owner can reset the tire pressure monitoring to eliminate the alarm reminder. 2. Impact of tire pressure: The pressure of car tires has many effects on vehicle operation and performance, especially on tire maintenance. Tire pressure is affected by temperature. In summer, when temperatures are high, the density of the gas decreases, causing the tire pressure to rise. Therefore, when summer temperatures are too high, be careful not to overinflate the tires. Excessive tire pressure can affect the vehicle's handling performance, cause excessive wear on the tread in the middle of the tire, reduce the tire's service life, and more seriously, excessive tire pressure can easily lead to tire explosions, which are highly dangerous. Therefore, it is important to always monitor changes in tire pressure.

14

4

Share

What are the items in the automatic transmission subject three test?

Automatic transmission subject three test content: preparation before getting on the car, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing crosswalks, passing school zones, passing bus stops, meeting cars, overtaking, making U-turns, and driving at night. Extended information about the test items and precautions is as follows: 1. Preparation before getting on the car: adjust the seat and rearview mirror before getting on the car, and check whether the brakes and acceleration are normal. 2. Other items: left and right turns and U-turns (do not move the steering wheel within three seconds of turning on the turn signal, and the speed must match the gear). Passing bus stops, passing crosswalks, passing school zones (speed cannot exceed 30 km/h, and look left and right to see if there are pedestrians passing). Shifting gears operation (complete the shifting gears operation within the specified time and distance). Changing lanes and overtaking (do not turn the steering wheel within three seconds of turning on the turn signal, and complete within the specified time and distance). Driving straight (speed cannot be lower than 40 km/h, steering wheel fluctuation cannot be greater than three degrees, and complete straight driving within the specified distance). Passing traffic lights (stop and wait at red lights, stop midway, and must use first gear to start). Pulling over (choose a suitable section to pull over within the specified distance).

10

5

Share

Where is the start-stop switch of Fengshen AX7?

What should you pay attention to when buying a used car?

What Are the Reasons for Insufficient Oil Pressure in a Car?

What does it mean when a car has its hazard lights on all the way?

Will the Accord chassis be damaged if it is hit?

Where is the tire pressure reset button for Geely Vision?

What are the items in the automatic transmission subject three test?

What is the maximum speed of the Breeze?

How to distinguish between Volkswagen Phaeton and Phideon?

How to Fix a Stiff Brake Pedal?

Where is the Bluetooth in the old BMW 1 Series?