Where is the spare tire located in the Volkswagen Touran 7-seater model?

2 Answers
MacWilliam
07/29/25 12:57am
The spare tire of the Volkswagen Touran 7-seater model is placed in the trunk. The bottom of the trunk can be opened, which is where the spare tire is located. Taking the Volkswagen Touran L as an example, the details are as follows: 1. Body dimensions: The Volkswagen Touran L measures 4527*1829*1659mm in length, width, and height, with a wheelbase of 2791mm. 2. Powertrain: The Volkswagen Touran L is equipped with a 1.4T turbocharged engine, delivering a maximum power of 96kW/5000rpm and a maximum torque of 220N·m/1750rpm, paired with a 7-speed dry dual-clutch transmission.
Was this review help?
2
5
Share
JosephineMarie
08/12/25 5:08am
I've been driving a Volkswagen Touran 7-seater for several years. The trunk is usually filled with my kids' toys and luggage, but the spare tire is neatly tucked under the floor panel at the very bottom - just lift it up and it's right there. The design is quite thoughtful as it doesn't take up any extra space. Before every trip, I make sure to check the spare tire's air pressure, keeping it around 40 PSI, so it's ready to use immediately in case of a flat tire. Last time on the highway, my friend's car broke down suddenly, and fortunately my spare tire was there ready to go, saving us a lot of time. Reminder to everyone: don't neglect regular maintenance of your spare tire, otherwise it may lose air or deteriorate from prolonged disuse.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What are the symptoms of a faulty car air conditioner blower resistor?

The main function of the car blower resistor is to control the speed of the airflow. If it is damaged, the most obvious symptom is the inability to adjust the air conditioner's fan speed. The method to diagnose it is also simple. Prepare a multimeter, set it to the ohm scale, place the red probe on the positive terminal of the resistor and the black probe on the negative terminal. Then check if the reading on the multimeter is normal. If the measured resistance value is 0, it indicates that the resistor is faulty. The steps to replace the blower resistor are as follows: Prepare the replacement blower resistor, a Phillips screwdriver, and other tools, then turn off all electrical devices and the ignition switch of the car; disconnect the car battery and the blower assembly connector (the blower is usually located under the glove compartment on the passenger side), remove the blower's fixed wiring harness, and then unscrew the blower assembly's mounting screws; You can find the resistor at the location where the blower is removed (connected near the air duct), use tools to remove it, and install the new resistor; Reinstall the blower and all wiring, reconnect the battery, start the car, and activate the blower to check if the fan speed can be adjusted. It is best to go to a 4S shop or a professional repair shop to replace the blower resistor. Because the replacement process involves wiring issues in the car's electrical system, improper operation may damage the blower or even burn out the car's circuits.
3
3
Share

What is the function of the auto button on a Mercedes-Benz car?

The function of the auto button on a Mercedes-Benz car is: 1. The auto button for automatic air conditioning, pressing this button will activate the automatic air conditioning system. The vehicle will detect the temperature difference between the inside and outside of the car and automatically adjust the temperature, airflow mode, and speed of the air vents; 2. The auto button for automatic gear shifting, pressing this button will enable automatic gear shifting, and the vehicle will change gears automatically based on the set speed; 3. The auto position on the automatic headlight knob, when rotated to the auto position, the vehicle's small lights and low beams will be controlled by the computer, adjusting automatically based on the light intensity detected by the sunlight sensor.
12
2
Share

Which gear should an automatic car be in when waiting at a red light?

Which gear an automatic car should be in when waiting at a red light depends on different situations: 1. If the waiting time is more than 40 seconds, shift to N gear; 2. If it is less than 40 seconds, stay in D gear. In an automatic car, the driver does not need to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. There are six gear positions in an automatic car, from top to bottom: P, R, N, D, S, and L. The correct method to start an automatic car is: 1. Move the gear selector to the intended driving position and then press the accelerator; 2. Do not press the accelerator abruptly; press it slowly.
5
5
Share

What are the methods for dealing with carbon deposits in cars?

Methods for dealing with carbon deposits in cars include: 1. Cleaning the throttle valve by removing the engine cover, detaching the throttle valve, cleaning it with carburetor cleaner, drying it with a cotton cloth, and reinstalling it; 2. Cleaning internal engine carbon deposits by adding an engine internal cleaner into the oil port, idling the engine for 10 minutes, and then replacing the oil and oil filter; 3. Cleaning the fuel system, injectors, combustion chamber, spark plugs, throttle, intake tract, and intake manifold. Effects of carbon deposits on vehicles: Reduced engine power, and in severe cases, it can cause engine knocking, acceleration noise, damage to pistons and crankshafts, and cylinder scuffing.
15
4
Share

How to Open the Hood of a Volkswagen Tiguan?

The method to open the hood of a Volkswagen Tiguan is as follows: 1. Open the car door and enter the driver's seat; 2. Locate the hood release lever on the lower left side; 3. Pull the hood release lever upwards to open the hood. Taking the 2017 Volkswagen Tiguan as an example, its body dimensions are: length 4506mm, width 1809mm, height 1685mm, with a curb weight of 1600kg. The 2017 Volkswagen Tiguan is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 160PS, maximum power of 118kW, maximum torque of 250Nm, paired with a 6-speed automatic transmission.
12
0
Share

What Does Harley Cubic Represent?

Harley cubic represents the maximum displacement of the cylinder and piston during one power stroke. Displacement: A specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Automobile displacement is an important parameter for measuring a vehicle. Some domestic cars may not have the model number displayed on the rear, but their displacement is usually indicated on the body or rear. Differences in automobile engine displacement: Maximum speed varies: Different displacements result in different maximum speeds achievable by the vehicle, also affecting the car's performance when fully loaded on a good level road. Acceleration capability differs: Different displacements lead to variations in acceleration time, performance, and distance.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.