Where is the rearview mirror heating button on the Lynk & Co 03?
1 Answers
The rearview mirror heating button for the Lynk & Co 03 is located as the fourth button below the center console screen, featuring a small icon with three upward-pointing arrows. Here is more extended information about the rearview mirror heating button: Button function: When the rearview mirror heating switch is pressed, the indicator light on the button will illuminate. The heating element will rapidly heat up to a fixed temperature within a few minutes. In low external temperatures, steam will rise from both side mirrors, and water droplets on the mirror surface will gradually evaporate as the temperature rises, causing the fog to slowly disappear. This achieves the effect of heating the mirror, defogging, and defrosting. The working principle of electrically heated rearview mirrors is very simple and not highly costly. It involves installing a heating element (heating film) inside the mirror lenses on both sides. During rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element will quickly heat up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. This helps heat the mirror, remove fog and frost, providing great convenience for the driver. Electrically heated rearview mirrors are very effective against fog and moisture but are not particularly effective against rain. In light rain, raindrops on the mirror will be somewhat dried; in heavy rain, the effect is average, merely preventing excessive water accumulation on the mirror. Heated rearview mirrors are generally more practical in winter. Frost on the front windshield can be removed by turning on the heater to blow air onto the glass after starting the car, while frost on the rear windshield can be removed by activating the rear window heating switch, which uses heating wires embedded in the rear window glass. Suitable weather conditions: Applicable during rainy and snowy weather.
