Where is the ramp parking position located?

1 Answers
OAnthony
07/30/25 9:36am
Ramp parking position is located where the vehicle's bumper aligns with the parking pole line. Operation tips: Control the speed properly, select reference points accurately, and coordinate movements smoothly. Precautions: Before ascending the slope, straighten the direction in the shortest time possible. When going uphill, turn on the right turn signal and approach the right side of the area, ensuring the right side of the vehicle is parallel to a solid line on the right side of the road, with the side of the vehicle no more than 30 cm away from the solid line and not crossing it. Pay attention to the coordinated operation of the clutch, accelerator pedal, and parking brake lever, and the timing of releasing the parking brake lever. Evaluation criteria: After the vehicle stops, if the front bumper of the car or the front axle of the motorcycle is not fixed on the pole line, and the deviation is within 50 cm, 10 points will be deducted; if the vehicle body is more than 30 cm away from the roadside line after stopping, 10 points will be deducted; if the distance exceeds 50 cm, the test will be failed; if the vehicle rolls back 30 cm but not more than 50 cm after starting, 20 points will be deducted; if the vehicle rolls back 50 cm after starting, the test will be failed; stalling on the slope will result in a 10-point deduction; after stalling, restart the vehicle in neutral gear, not in gear; if the vehicle is not started within 30 seconds after stopping, it will be considered as a timeout failure.
Was this review help?
13
5
Share
More Forum Discussions

What is a PCV valve in a car?

PCV valve, which stands for Positive Crankcase Ventilation, is an active ventilation control system, functioning as a metering control valve installed between the engine crankcase ventilation system and the intake system. 1. Introduction: The PCV valve consists of a valve body, valve, valve cover, and spring, and is non-disassemblable. Its primary function is to direct gases from the crankcase into the intake manifold via the PCV valve, with a small amount of air entering the intake manifold directly from the air cleaner through the PCV valve. This prevents throttle icing, incomplete combustion, and emission deterioration, while also stopping blow-by gases from entering the atmosphere and preventing engine oil deterioration. 2. Working Principle: The PCV valve is controlled by vacuum, regulating the flow of oil fumes generated by the crankcase ventilation system into the intake system. The flow rate is higher when the engine operates at high speeds compared to low speeds. Additionally, in the event of engine backfire, the PCV valve should cut off ventilation to prevent crankcase explosions.
10
1
Share

Why Does the Focus Smell So Bad?

The reasons for the bad smell in the Focus are as follows: 1. Air filter causing odor: Many owners report that when the air conditioning is turned on, a sour and musty smell blows in, which is very unpleasant, but this condition usually eases after a while. In fact, this odor is a sign that the air filter needs to be replaced. The air conditioning system has been decomposed by bacteria, leading to mold, and replacing the air filter can alleviate the smell. 2. Evaporator causing odor: If the smell persists after replacing the air filter, the issue likely lies with the evaporator. Mold inside the evaporator is the culprit, and simply replacing the air filter won't solve the problem. In this case, cleaning the evaporator and air conditioning ducts is necessary. Some repair shops may also offer an additional service called "interior sauna," with effectiveness depending on the thoroughness of the cleaning. 3. Smoking causing interior odor: Owners who frequently smoke in the car may not notice the smell (due to adaptation), but others, especially women, find it very noticeable and unpleasant. To eliminate this odor, a thorough cleaning of the car's interior, including the air conditioning and upholstery, is required. 4. Trunk clutter causing odor: Owners who store various items in the trunk, especially eggs and meat, may encounter strong odors. Broken eggs or thawing frozen meat can leave liquids in the trunk, which over time produce a pungent smell. Special treatment at a car wash is needed to resolve this issue. 5. Pungent plastic smell inside the car: A burnt plastic smell that appears when the car is running but disappears when the car is turned off and cools down is likely caused by a plastic bag stuck to the exhaust pipe. The high temperature of the exhaust pipe melts the plastic, releasing the odor into the car. Removing the melted plastic from the exhaust pipe is the only way to eliminate this smell.
12
2
Share

What is the difference between GF5 and GF6 engine oil?

Compared to GF5 engine oil, GF6 engine oil offers the following advantages: 1. Wear resistance: Comprehensive improvement in wear resistance, with low-viscosity oil providing superior protection. 2. High-temperature oxidation resistance: Significant enhancement in high-temperature oxidation resistance, ensuring stable protection even under extended oil change intervals. 3. Vibration reduction: Prevents low-speed pre-ignition, reduces vibration limitation, and effectively extends the service life of turbocharged engines. It also offers better cleaning performance. 4. Less carbon deposits: Reduced carbon buildup in the engine, keeping it cleaner. 5. Lower consumption: Improved fuel economy with lower and more economical fuel consumption, reducing carbon emissions for better environmental protection.
2
3
Share

Where is the charging port of the GL8?

The charging port of the GL8 is located in the button area of the front console. There is a 12-volt power socket under the console, and you can see the socket by opening the cover. Behind the floor console, there may also be a 12-volt power socket. The maximum power should not exceed 120 watts. When the ignition switch is off, you cannot charge any device. Additional information: Charging precautions: 1. Before using the car charger to charge electronic devices such as mobile phones, be sure to confirm the charging voltage and current range of the product, and ensure that it matches the output current and voltage of the car charger's USB interface before use. 2. Most mobile phone batteries on the market do not support fast charging. In this case, try not to use USB interfaces with larger output currents for charging, as this will shorten the battery life of the phone. 3. To protect the health of the phone and personal safety, start the vehicle before using the car charger, and insert the car charger after the vehicle is running smoothly. The car charger should be unplugged before parking. During smooth vehicle operation, the connection between the car charger and the vehicle should be disconnected promptly after charging is completed. Use the car charger with caution during thunderstorms and hot weather. 4. The car charger is mainly used for emergency charging of electronic devices such as mobile phones. The output voltage of the car charger is not stable, and long-term use will affect the battery life. Try to use the standard charger that comes with the phone for charging.
19
5
Share

Where is the largest used car trading market in Qingdao?

The largest used car trading market in Qingdao is located at No. 2 Songhua River Road, Huangdao. Below is some information about used cars: 1. Introduction: The definition of a used car directly relates to the scope of vehicles involved and, to some extent, affects the scientific nature of the used car evaluation system and the standardization of market transactions. Therefore, it is necessary to provide a clear definition. 2. Suitable for: The biggest selling point of used cars is their affordability. With the same amount of money used to buy a new car, you can purchase a higher-grade used car. 3. Advantages: When a newly launched car encounters a malfunction, it is often difficult to find the necessary auto parts even after searching many places. However, if you buy a used car, you won't have to worry about the difficulty of finding auto parts.
19
2
Share

Is BYD Battery Lithium Iron Phosphate or Lithium Battery?

BYD battery is a lithium iron phosphate battery. Currently, the batteries for electric vehicles are mainly divided into the following two categories: 1. Ternary lithium battery: Ternary lithium batteries can be specifically divided into nickel-cobalt-aluminum and nickel-cobalt-manganese types based on the different cathode materials. The energy density is primarily determined by the nickel and manganese content in the battery. The higher the nickel content, the greater the battery's energy density, but the stability of the battery operation will decrease significantly. 2. Lithium iron phosphate battery: Lithium iron phosphate battery is a branch of lithium batteries, with advantages such as safety, reliability, and long service life. However, the energy density of lithium iron phosphate batteries is relatively low, which is why BYD developed the Blade Battery to address the shortcomings of lithium iron phosphate batteries.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.