Where is the Porsche Cayenne's cabin air filter located?

2 Answers
BethanyDella
07/29/25 8:07am
Porsche Cayenne's cabin air filter is located beneath the glove compartment on the passenger side. Open the upper section of the passenger footwell to find a black plastic panel with two retractable clips. Remove this panel to access the cabin air filter. The replacement interval for a car's cabin air filter depends on usage conditions. For typical urban household vehicles, it's recommended to replace it every six months or annually. The Porsche Cayenne measures 4918mm in length, 1983mm in width, and 1696mm in height, with a wheelbase of 2895mm. It is equipped with a 2.9T twin-turbocharged engine paired with an 8-speed automatic transmission. This engine delivers a maximum power output of 324kW and peak torque of 550Nm.
Was this review help?
12
2
Share
LukasMarie
08/12/25 11:19am
The Porsche Cayenne's cabin air filter is quite well hidden! It's mainly located behind the glove compartment on the passenger side, and you'll need to remove a panel to see it. Last time I replaced it myself, I had to lie down in the footwell and work while looking up—it's positioned inside a black plastic cover to the right of the blower motor. Just pry open the clips to pull it out. A heads-up: the location differs between older and newer models. For third-gen Cayennes (post-2015), the filter was moved to below the glove box. Remember to check it before the rainy season—moldy filters can blow out musty air, which is particularly bad for your respiratory system. If you're handy, you can replace it yourself, but note that the Cayenne's filter has upper and lower layers—make sure not to install them backward.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

Do I need to register a car spoiler with the DMV?

Installing a spoiler on a car requires registration with the DMV. Registration method: If you want to install a spoiler, you need to report and register it with the DMV. Ensure that the installed spoiler does not exceed the original width of the vehicle. Apply for a vehicle modification registration at the DMV, take photos for the vehicle license, and undergo an inspection at the testing line. After on-site inspection by DMV personnel confirms that the spoiler does not affect the safe operation of the vehicle, the spoiler can be registered. Modifications requiring registration: Before modifying a vehicle, the owner should apply for a modification registration with the local DMV. Modifications such as the engine, vehicle frame, or more than two-thirds of the vehicle's appearance require registration.
14
4
Share

What are the reasons for the tire pressure monitoring not displaying?

The tire pressure monitoring not displaying may be due to the following reasons: 1. The battery of the module is depleted, and generally, the entire tire pressure monitoring module needs to be replaced. 2. The module's inspection port is blocked by something, preventing the module from performing detection. 3. Pairing failure, requiring re-pairing. Some vehicle models can complete this on their own, but most models require professional pairing at a 4S shop. 4. The module is already damaged and can only be replaced with a new one. 5. If the tire pressure of one tire is not displaying, first determine if the tire pressure sensor of that wheel is installed correctly. Remove the tire and reinstall it to try again. If it still doesn't display, you can swap the normal sensor to this wheel. If it still doesn't display, it indicates a fault with the tire pressure display module. If it displays normally, it means the sensor is damaged.
6
1
Share

What are the general maintenance items for a car?

General car maintenance includes items such as engine oil and oil filter, air filter and cabin air filter, windshield washer fluid, coolant, transmission fluid, clutch fluid, and differential fluid. Engine oil and oil filter are the most basic and essential items in maintenance, which must be inspected and replaced during every service. For most vehicle models, the engine oil, fuel filter, oil filter, and air filter should be replaced approximately every 5,000 kilometers to extend the engine's lifespan. Proper installation of the oil filter can prevent impurities from mixing into the engine oil during the operation of the internal combustion engine, avoiding wear on moving parts and blockages in the oil passages. Correct installation of the fuel filter can prevent cylinder wear caused by impurities and moisture mixed into the gasoline during storage, transportation, and refueling. To ensure optimal engine performance, the fuel filter should generally be replaced every 20,000 kilometers or once a year.
10
5
Share

What are the symptoms of a faulty car water pump?

When a car's water pump fails, it mainly exhibits the following symptoms: 1. The engine coolant temperature rises and does not decrease; 2. Water leakage occurs near the water pump area of the engine; 3. Unusual noises come from the water pump area after starting the engine. Here is some relevant information about water pumps: 1. Automotive engines widely use centrifugal water pumps. Their basic structure consists of components such as the water pump housing, connecting flange or pulley, water pump shaft and bearings or integrated shaft bearings, water pump impeller, and seal assembly, making them a major component of the vehicle. 2. They are generally driven by the engine's crankshaft via a V-belt. The drive belt wraps around the crankshaft pulley and the water pump pulley, causing the water pump shaft to rotate as the crankshaft turns. The water pump shaft then drives the impeller to rotate, thereby converting mechanical energy into hydraulic energy.
11
1
Share

What does double flashing mean?

Double flashing lights refer to hazard warning lights. Here is some relevant information: 1. When you see the vehicle in front turning on its double flashing lights, it means the vehicle is in an undrivable condition, whether due to a breakdown or being involved in a traffic accident while waiting for the police. This is to alert vehicles behind that there is a stationary car ahead to avoid collisions. 2. Traffic regulations state: In case of a breakdown or accident on the highway, the hazard warning lights must be turned on. At night, the width marker lights and tail lights should also be activated simultaneously. When the light switch is turned to the first position, the small lights that illuminate front and rear are the width marker lights, indicating the vehicle's width to alert oncoming and following vehicles. 3. Double flashing lights are emergency lights. When activated, both small lights flash simultaneously to warn passing vehicles to pay attention to safety. Double flashing lights are used in situations like foggy or heavy rain conditions, vehicle breakdowns, or emergencies.
12
2
Share

What is the actual fuel tank capacity of the Envision in liters?

The standard fuel tank capacity of the Envision is 65L. Below is more information about the Envision: 1. On August 28, 2014, the SAIC-GM SUV model, the Buick Envision, made its official debut on the eve of the Chengdu Auto Show. The Envision is equipped with a 2.0T engine paired with a 6-speed automatic transmission. 2. On December 18, 2018, SAIC announced through the Buick brand the launch of the 2019 Buick Envision models compliant with China's National VI emission standards. These models are available with either a 1.5T or 2.0T engine, each offering both front-wheel drive and all-wheel drive variants. The 1.5T engine is paired with a 7-speed dual-clutch transmission, while the 2.0T engine is matched with a 9-speed HYDRA-MATIC intelligent transmission.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.