Where is the one-key start button for Audi Q5?

3 Answers
VanJoshua
07/28/25 7:45pm
Audi Q5's one-key start button is located near the steering wheel, in front of the handbrake on the center console, and it is a silver button. The Audi Q5 can be started not only with the one-key start device but also with the key by inserting it into the key slot near the steering wheel. The one-key start differs from the traditional mechanical key ignition method and the conventional starting procedure; simply press the one-key start button lightly to start or turn off the engine. The Audi Q5 is a versatile SUV that perfectly combines the body design of a sports car, efficient power, and sensitive handling. The dimensions of this car are 4629mm in length, 1898mm in width, 1655mm in height, with a wheelbase of 2897mm.
Was this review help?
3
5
Share
DiRosalie
08/11/25 11:33pm
I recently drove my friend's Audi Q5 and found that the one-touch start button is very easy to locate—it's positioned just below the right side of the steering wheel, near the driver's side of the instrument panel, specifically a small button with an engine icon on the left side of the center console. To use it, you need to press the brake pedal first and then press the button to start the engine, which makes the operation quite convenient. Sometimes, during cold winter starts, you might need to wait a few seconds, so just be patient. If the button isn't obvious, check if something is blocking it or if dirt is affecting its sensitivity—regular cleaning can prevent this issue. The interior design is well-thought-out, placing the button within easy reach without distracting from driving.
Was this review help?
14
1
Share
Expand All
VanNatalie
09/30/25 6:05am
I've been driving for almost twenty years. The one-button start design of the Audi Q5 is located on the right side of the steering wheel, next to the instrument panel, on the driver's side. Before starting, it's best to confirm that your foot is on the brake pedal, so the button will respond, avoiding the car suddenly lurching forward and causing an accident. The position may vary slightly in different model years of the Q5, but it's always in this area. If the button doesn't respond, it might be due to low battery in the key or signal interference in the car—try replacing the battery. Safety comes first when driving, and being familiar with the locations of these functions can make driving more reassuring.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What causes the intermittent shaking of the Focus engine?

The reasons for the intermittent shaking of the Focus engine are: 1. Severe engine carbon deposits: Symptoms include poor engine performance, increased fuel consumption, and even difficulty starting; 2. Issues with the ignition system: Certain components or wiring of the ignition coil in the arc system may have open circuits or short circuits; 3. Unstable oil pressure: This can be due to insufficient engine oil, dirty oil, thinning oil, oil pipe leakage, oil pump damage, or excessive wear of its components. The Focus is a compact car launched by Changan Ford, with dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, and a wheelbase of 2705mm. It is equipped with a 1.5L naturally aspirated engine or a 1.5T turbocharged engine, paired with an 8-speed automatic, 6-speed automatic, 6-speed manual, or 8-speed automatic manual transmission.
13
3
Share

What are the reasons for fifth gear disengagement?

The reasons for fifth gear disengagement are as follows: 1. Self-locking device damage: To prevent gear disengagement during driving, the transmission control mechanism is usually equipped with a self-locking device. If this device is damaged (e.g., broken self-locking spring, fractured self-locking ball head, etc.), it may cause transmission disengagement. 2. Severe synchronizer wear: When the synchronizer engagement sleeve lock ring or slider is severely worn, the synchronizer may overcome the locking force of the self-locking device during high-speed rotation, sliding out of the engagement gear ring and causing transmission disengagement. 3. Severe wear of the shift lever or fork: If the shift lever or fork is severely worn, the fork may fail to push the synchronizer to the engagement position, preventing perfect meshing with the engagement sleeve. During high-speed rotation, the synchronizer may then slide out of the engagement sleeve, leading to transmission disengagement.
17
2
Share

How Many Years Should You Drive a Car Before Replacing It?

The usable lifespan of a car is not determined by its age but by its mileage. The government will recommend scrapping a car once it reaches 600,000 kilometers. Here are some ways to extend your car's lifespan: 1. Maintain good driving habits: The way you drive significantly impacts your car's longevity. Gentle driving, gradual acceleration, and anticipating braking can reduce wear and tear while saving fuel. In cold weather, warm up the car first to allow the lubricant to circulate freely and fully lubricate internal components. 2. Regular cleaning and weight reduction are essential: Take care of the car's exterior with periodic washing and waxing, and don’t neglect the interior. Spend time cleaning instead of just masking odors with air fresheners, and vacuum the carpets regularly. 3. Choose a trusted repair shop: Visiting different shops each time means every technician has to relearn your car, perform the same thorough inspection, identify potential issues, and then address them. This process takes longer and may cost more.
9
2
Share

What does 'road' mean on a car?

On a car, 'road' refers to a differential lock. The function of a differential lock: A differential lock is a differential with an automatic locking function. Its purpose is to enhance the vehicle's ability to traverse poor road conditions. Specifically, when one of the vehicle's drive axles spins freely, the differential lock can quickly lock the differential, turning the two drive axles into a rigid connection. Standard differential: A standard differential allows the left and right wheels to rotate at different speeds. However, when one wheel spins freely, the other wheel on good road surface also fails to receive torque, causing the vehicle to lose driving power. In such cases, the differential becomes ineffective. By connecting the two wheels together, power can at least be transmitted to the other wheel, providing the vehicle with driving force to escape the predicament. This situation also applies to central differentials. As a result, various differential locking mechanisms have been developed.
11
5
Share

Can I Turn on the Air Conditioning Directly After Getting in the Car?

You should not turn on the air conditioning directly after getting in the car. It is recommended to wait a few minutes after the vehicle is running before turning it on, as it takes a few minutes for the lubricating oil to fully lubricate the various components of the engine. Turning on the air conditioning immediately after getting in the car will increase the load on the engine, and starting the air conditioning without sufficient lubrication will accelerate engine wear. Below is an introduction to air conditioning maintenance: 1. Comprehensive inspection of the air conditioning: When using the air conditioning for the first time in summer, you should first check the air conditioning system, such as checking the refrigerant and whether the air conditioning filter is too dirty through the liquid storage tank, and whether there are foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioning: The air filter should be replaced regularly, otherwise the air conditioning will produce a musty smell. In addition, the condenser should also be cleaned regularly, and the water tank should be removed for thorough cleaning.
16
0
Share

Why can't the car key be turned and the steering wheel can't be moved?

The reason why the car key can't be turned and the steering wheel can't be moved is that the car's automatic steering wheel lock function has been activated. Reasons for the steering wheel lock: For the safety of the vehicle, when the car is turned off, if the steering wheel is turned left or right or the wheels are not parked straight, the force will cause the steering wheel to rotate, triggering the steering wheel self-locking function. This causes the steering lock pin and steering column to engage. The vehicle's anti-theft system perceives a potential theft risk, thus locking the steering wheel to prevent theft. Unlocking method: First, insert the key and press the brake, then turn the steering wheel left and right. Although the steering wheel is in a locked state at this time, it can still be slightly rotated when turning. While turning the steering wheel, turn the key simultaneously to complete the steering wheel unlocking procedure.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.