Where is the oil pressure sensor located on the Buick Excelle?

1 Answers
GiaDella
07/29/25 10:45pm
The oil pressure sensor on the Buick Excelle is located on the main oil gallery on the side of the engine. The oil pressure sensor is a crucial component for monitoring the engine's oil pressure, and the data it collects helps ensure the engine operates normally. The Buick Excelle is a premium mid-size sedan launched by SAIC-GM, featuring a five-door coupe design that embodies the dynamic genes Buick can offer for mid-size cars. It adopts the brand's new family-style winged chrome grille, giving the front fascia a sharper and more robust appearance. In terms of dimensions, the Buick Excelle measures 4419mm in length, 1814mm in width, and 1487mm in height.
Was this review help?
5
1
Share
More Forum Discussions

How to Replace the Transmission Fluid for Magotan?

Steps to replace the transmission fluid for Magotan: 1. First, add the transmission cleaner into the transmission. 2. Lift the car and switch between D and R gears, running for 5 to 10 minutes. 3. After completing the above two steps, the automatic transmission will be cleaned. Below are some related details: 1. Unlike changing engine oil, replacing automatic transmission fluid requires the use of an automatic transmission deep maintenance device to completely remove the old automatic transmission lubricant and other debris. 2. Typically, the replacement time for transmission fluid depends on the driver's proficiency in vehicle operation, the road conditions the vehicle frequently encounters, and the mileage covered within a certain period. 3. Without a major transmission overhaul, there are two methods to replace the transmission fluid: (1) One is the traditional gravity method, which involves draining the fluid by loosening the transmission's drain plug, similar to changing engine oil, and then refilling with new fluid. (2) The other method uses a circulation machine to replace the automatic transmission fluid, mainly utilizing the machine's pressure to dynamically replace the fluid in the torque converter's lubrication and cooling pipes.
7
3
Share

How to Start the Tenth Generation Accord?

The starting method for the tenth generation Accord is: 1. Insert the key and turn it to the ON position to power on; 2. Press the brake pedal and shift to D gear; 3. Release the handbrake and lift the brake pedal to complete the vehicle start. Below is a related introduction to the tenth generation Accord: 1. The tenth generation Accord belongs to the mid-size car category, with body dimensions of length 4893mm, width 1862mm, height 1449mm, a wheelbase of 2830mm, a fuel tank capacity of 56L, a trunk capacity of 574L, and a curb weight of 1495kg. 2. The tenth generation Accord features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, a maximum torque of 260Nm, and a maximum power of 143kW, paired with a continuously variable transmission (CVT).
13
4
Share

What is the actual measured fuel consumption of the 10th-generation Civic 1.5T?

The fuel consumption range of the 10th-generation Civic 1.5T is 5.91~7.77 liters per 100 kilometers, with an average fuel consumption of 6.84 liters per 100 kilometers. The CVT version of the 10th-generation Civic has a fuel consumption range of 6.42~8.56 liters per 100 kilometers, with an average fuel consumption of 7.49 liters per 100 kilometers. Relevant information about the Civic is as follows: 1. In terms of power, the new Civic is equipped with a 1.5T turbocharged engine and a 1.0T turbocharged engine, paired with a 6-speed manual transmission or a CVT. 2. It is worth noting that the engine tuning parameters vary depending on the transmission (the manual version has slightly higher torque). The 1.5T engine of the Civic has a maximum power of 130 kW at 6000 rpm and a peak torque of 220 N·m at 1700-5500 rpm. The actual measured 0-100 km/h acceleration time for the 10th-generation Civic 1.5T is 7.09 seconds.
2
0
Share

Should You Release the Handbrake or Shift Gears First in an Automatic Car?

For an automatic car, you should shift gears first and then release the handbrake. Here is some relevant information: 1. Pay attention to the starting sequence. What's more important for an automatic car is the parking sequence, because the automatic transmission is in P (Park) gear, where the transmission gears are locked. When parking on a slope, the correct procedure is to brake first, then pull the handbrake, and only shift into P gear after the car has completely stopped. 2. If you shift into P gear first and then brake, the car might roll back slightly due to the slope. Since P gear locks the transmission, this slight backward movement could potentially damage the transmission. 3. The same principle applies when parking in a parking space with wheel stops behind the tires. If you release the brake, the car might lurch forward slightly due to elasticity. It's best to tighten the handbrake first before shifting into P gear.
14
1
Share

How to activate the one-touch window lift function with the key for the 2021 CR-V?

2021 CR-V key one-touch window lift activation method is: 1. Press and hold the lock button for more than 3 seconds, all windows will rise until closed. 2. Simply press and hold the unlock button on the key for about 3 seconds, and all four window glasses will synchronously lower. Features of the 2021 CR-V model: 1. Exterior: The 2021 Honda CR-V features a more refined front grille, with the middle grille adorned with delicate chrome trim. The headlights are larger in design, and the LED daytime running lights are highly recognizable. The lower air intake adopts a trapezoidal design, with elongated front fog lights on both sides. 2. Body dimensions: The length, width, and height of the body are 1855mm, 1689mm, and 2660mm respectively. 3. Powertrain: The 2021 Honda CR-V is equipped with a 1.5T inline four-cylinder engine.
11
4
Share

What is the actual fuel consumption of the Mercedes-Benz E260?

There are a total of 8 available models of the Mercedes-Benz E260, including the Mercedes-Benz E-Class - 2022 Model - Facelift - E260L Sport, Facelift - E260L, Facelift - E260L Sport - 4MATIC, Facelift - E260L 4MATIC, E260L Sport, E260L, E260L Sport - 4MATIC, and E260L 4MATIC. These models are equipped with a 197-horsepower engine, and their NEDC fuel consumption is 9.69L per 100 kilometers. The fuel tank capacity is the same for all E260 models. The distance that can be covered with a full tank of fuel is as follows: For models equipped with the 197-horsepower engine, the fuel tank capacity is 66L, and the distance that can be covered with a full tank is 66/9.69*100=681km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a traffic light can increase fuel consumption.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.