···
Log in / Register

Where is the oil filter located in the 2018 AX7?

6Answers
MacEvangeline
07/29/2025, 06:05:29 AM

The oil filter of the 2018 AX7 is located near the engine, possibly on either side or underneath. Below is an introduction to related content: 1. Function: The oil filter is designed to remove impurities, colloids, and moisture from the engine oil, delivering clean oil to all lubrication points. 2. Model: The 2018 AX7 is developed and manufactured by Dongfeng Fengshen, representing an independent brand SUV model. 3. Body Dimensions: The vehicle measures 4696mm in length, 1850mm in width, and 1712mm in height. 4. Design: The 2018 AX7 adopts the Interactive Geometry 2.0 design concept, featuring a new track emblem, a luxury matrix full LED headlight system with IHBC intelligent high beam control, independent LED daytime running lights styled as "Wings of Wind," a full LED continuous family-style taillight strip, 19-inch aerodynamic rims paired with Pirelli tires, ensuring smooth handling across various complex road conditions.

Was this review help?
113
Share
JamesAnn
08/13/2025, 08:48:47 AM

I've been driving the 2018 AX7 for several years. The oil filter is located underneath the front lower part of the engine, near the oil pan. You'll need to open the hood and look downward to vaguely spot it. When replacing, it's best to lift the vehicle or use a jack for assistance. Lying on the ground with a flashlight will give you a clearer view of its position. During my first oil change, I almost removed the wrong component because it's tucked beneath some piping - I recommend carefully cleaning surrounding oil stains to avoid confusion. The location was designed there for easy technician access, but when DIY-ing, ensure the vehicle is parked stably and cooled down before proceeding - never attempt this on a hot engine. Regular replacement every 5,000 km protects the engine from contaminant damage and extends its lifespan. I usually take the opportunity to inspect other oil lines for leaks. Overall, identifying the correct position makes oil changes smoother, saving both time and money.

Was this review help?
15
Share
Expand All
AlexanderFitz
10/06/2025, 10:50:41 PM

With years of extensive driving experience, the oil filter location for the 18 AX7 model is generally at the front lower part of the engine. To be more specific, it's situated in the lower section of the engine bay, requiring the vehicle to be lifted for access, typically just ahead of the transmission. I emphasize safety first—ensure the handbrake is engaged and wheel chocks are in place to prevent any risk of slipping before replacement. The area tends to accumulate oil grime, but a quick wipe with an old cloth will reveal it clearly, making it easier to remove with a professional wrench. Its design there reduces oil circuit resistance, but the spot is somewhat dimly lit, so I recommend operating under good lighting conditions. After replacement, remember to clean off the old filter and refill with new oil. I regularly check to ensure there's no looseness. Paying attention to correct placement can prevent engine wear and excessive fuel consumption—these details make daily driving more secure and reliable.

Was this review help?
7
Share
Expand All
EvangelineRose
10/06/2025, 10:52:39 PM

I enjoy DIY car maintenance in my spare time. The oil filter for the 2018 AX7 is located at the front bottom of the engine, clearly visible. Just jack up the car and lie underneath – you'll spot it near the front wheel area, easy to find and remove. I recommend keeping rubber gloves and an oil filter wrench handy for effortless work. Avoid the exhaust components when replacing it, and remember to apply fresh oil on the new seal ring to prevent leaks. Changing it regularly every 5,000 kilometers helps the engine run smoother, saves money, and builds practical skills. It's a fun way to gain useful knowledge while preventing potential breakdowns.

Was this review help?
18
Share
Expand All
VanStella
11/19/2025, 11:14:12 PM

In my daily use of this car, I noticed that the oil filter is located beneath the engine, towards the front on the driver's side. When replacing it, you need to lift the vehicle for simple operations like lying down or using tools. The design facilitates oil flow, but be careful not to accidentally disturb other components. I change it regularly every 5,000 kilometers or so to keep the engine clean and running efficiently. Knowing the location makes maintenance time-saving, cost-effective, and hassle-free. The key is to ensure the vehicle is safely parked and stable before starting the work.

Was this review help?
9
Share
Expand All
MacCorey
01/10/2026, 12:52:28 AM

I believe a detailed understanding of the oil filter location is crucial for vehicle health. In the 2018 AX7 model, it is positioned at the core point of the engine's bottom oil circuit, typically directly underneath. You need to lift the vehicle and accurately locate it to avoid misjudging its position. It is placed there to optimize the oil pressure system and reduce pressure loss. I recommend cleaning the surrounding area and checking the seal before operation to ensure no leakage. After replacement, conduct a test run to check for any abnormalities, as this can extend engine life. Knowledge of its location also aids in daily maintenance, enhancing driving confidence and reliability.

Was this review help?
8
Share
Expand All
More Q&A

Should an automatic transmission car be shifted to N or P gear for long-term parking?

For long-term parking of an automatic transmission car, it is recommended to shift to P gear (Park). Typically, automatic transmission vehicles have a dedicated parking gear (Park), which evolved from the N gear and is specifically designed for parking. Inside the transmission, there is a pawl mechanism that locks the gear on the output shaft, creating a mechanical lock to secure the drive axle and prevent the vehicle from moving or slightly shifting. Different situations call for different gear usage. For short-term stops, you can keep your foot on the brake and maintain the gear in D (Drive). For prolonged stops, such as waiting at a red light, you can shift to neutral (N) and engage the handbrake. However, a vehicle in neutral is prone to rolling, and relying solely on the handbrake for extended periods may reduce its clamping force, especially when parked on a slope, increasing the risk of rolling backward accidents.
114
Share

Will waiting until the fuel tank warning light comes on to refuel damage the car?

Waiting until the fuel tank warning light comes on to refuel can damage the car. Below are some relevant explanations about waiting until the fuel tank warning light comes on to refuel: Evaporation obstruction: The fuel level indicator usually relies on feedback from the fuel level sensor or inspection as the standard. Therefore, whether it is "fuel" or something else like "water," what it displays is merely a "scale" and does not indicate to the owner whether it is fuel or water. Even with higher-quality fuel, there is a certain "water content." If the vehicle continues to be used in this way for a long time, the water may deposit due to evaporation obstruction (sealing) (water settles at the bottom while fuel floats on the surface), making the indicator show "correct," when in fact, it could potentially cause the engine to stall at any time. Fuel pump: When the fuel level reaches the "warning" line, even if there are no issues with the fuel itself, it can "slosh" due to road bumps, turns, and other driving conditions, preventing the fuel pump from "pumping" fuel in time. This can lead to vehicle shaking, jerking, or stalling due to insufficient fuel supply. Due to the characteristics of certain vehicle models, the fuel pump relies on fuel for cooling. If the fuel level has already reached the lowest mark, the fuel pump may become "exposed" above the fuel surface, failing to receive timely cooling. This can accelerate internal wear, cause premature wear, or lead to internal short circuits and burning due to overheating.
116
Share

What are the differences between the imported and domestically produced Mazda CX5?

There are two main differences between the imported and domestically produced Mazda CX5. Below is a detailed introduction to these two differences: 1. Exterior design: (1) Imported version The upward-sloping waistline gives the car a forward-leaning posture, and the slightly sloping rear end is very much in line with its sporty design inspiration. (2) Domestically produced version The domestically produced version adds a roof rack to the imported version, providing convenience for travel. 2. Interior configuration: (1) Imported version Front and rear head airbags, keyless start, body stability system, hill assist, multifunction steering wheel, seat lumbar support adjustment, headlight height adjustment, electric heated mirrors, dual-zone automatic air conditioning, etc., are all standard across the range. (2) Domestically produced version There are still many areas that need improvement in detail processing compared to the imported version.
108
Share

How many types of tire models are there for the Audi Q5?

The Audi Q5 has two tire specifications: 235/55-R19 and 255/45-R20. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Typically installed on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain driving performance. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high/low temperatures during operation. Therefore, they must possess high load-bearing, traction, and cushioning capabilities. Additionally, they need to exhibit high wear resistance, flex resistance, and low rolling resistance with minimal heat generation. Here are some details about the Audi Q5: 1. The Audi Q5 adopts the previous generation of Audi's family design, featuring an inverted trapezoidal grille with large rectangular grids and relatively square-shaped headlights. The overall body lines are predominantly smooth yet exude a strong sense of power, with a dignified and stable design that is more widely accepted. 2. The center console is tilted toward the driver's side, accommodating a wider range of driver operations. The functional areas are neatly organized and clearly laid out, with buttons and knobs offering premium tactile feedback. In terms of features, the Audi Q5 provides comprehensive safety and comfort equipment. 3. For passive safety, it includes full-size airbags and front-seat side airbags (with head airbags). For active safety, it is equipped with systems such as lateral driving assistance, hill-start assist, and hill descent control to enhance driving safety.
104
Share

How to Adjust the Air Conditioning Temperature on the Tiggo 8?

The method to adjust the air conditioning temperature on the Tiggo 8 is as follows: There is a temperature adjustment knob on the dashboard of the Tiggo 8, with one side marked in red and the other in blue. Turning the knob fully to the red side will produce hot air, while turning it fully to the blue side will produce room-temperature air. To get cold air, you need to press the AC compressor switch to activate the cooling system. The air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. The Tiggo 8 has dimensions of 4700mm in length, 1860mm in width, and 1746mm in height, with a wheelbase of 2710mm. The vehicle's engine delivers a maximum horsepower of 156Ps, a maximum power output of 115kW, and a maximum torque of 230Nm.
108
Share

What is the difference between straight-only, one-way, and straight lanes?

The specific differences between straight-only, one-way, and straight lanes are as follows: Straight-only: No left turns, no right turns, only straight ahead. The border of a straight-only sign is a circle with a white arrow inside. One-way: Indicates that all vehicles must travel in one direction. This sign is placed at appropriate locations at the entrance and intersections of one-way roads. It has a square border with a white arrow inside, indicating a one-way road. Straight lane: A road can have multiple lanes, but this one is designated for straight travel only. The straight lane has a white arrow in the middle, a blue background, and white dashed lines on both sides.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.