Where is the oil filter element of the Boyue located?

[VonCameron]

The oil filter element of the Boyue is located at the upper right front of the engine and can be seen by opening the engine hood. The functions of the oil filter element are: 1. To reduce the friction resistance between moving parts in the engine and minimize part wear; 2. To filter out impurities, gum, and moisture from the engine oil. The Boyue is a compact SUV under Geely, with body dimensions of 4519 mm in length, 1831 mm in width, 1694 mm in height, and a wheelbase of 2670 mm. The Boyue is equipped with a 1.8T turbocharged engine, delivering a maximum power of 120 kW at 5500 rpm and a maximum torque of 250 N·m, paired with a 6-speed manual transmission.

[LeRachel]

Having driven the Geely Boyue for many years, my experience tells me that the oil filter is located on the lower side of the engine block, specifically just above the oil pan. You can reach the black cylindrical metal canister by reaching up from underneath the car. When replacing it, first loosen the drain bolt to let the old oil drain completely, then use a specialized wrench to unscrew the old filter counterclockwise. The location is quite well-designed, as it's far from the exhaust pipe, minimizing the risk of burns. If you're doing it yourself, remember to prepare a new sealing ring and ensure the new filter model matches. It's best to let the car sit on level ground for half an hour before changing the oil to allow impurities to settle. The area around the filter tends to accumulate sludge, so it's recommended to use carburetor cleaner every two maintenance sessions to keep it clean.

[EvangelineLynn]

The oil filter location of the Boyue is relatively concealed, usually near the oil pan at the bottom of the engine. You can see it by lifting the car or crawling underneath - it's a fist-sized black metal canister. I've seen many novices spending a long time searching for it at repair shops, but it's actually located diagonally below the junction of the engine and transmission. Last time during maintenance, the technician reminded me that the 1.5T and 2.0L engines use different filter models, and the filter location changed from the passenger side in older Boyue models to the driver's side in newer versions. It's recommended to replace the filter every time you change the oil, otherwise metal shavings and impurities may clog the oil passages. The filter cap has anti-slip grooves, and wrapping it with a towel provides better grip when tightening.

[LillianaLynn]

The oil filter replacement location for the Boyue is at the middle-rear section of the engine bottom, right next to the engine mount. My neighbor, an auto repair technician, told me this design keeps the filter away from the high-temperature exhaust manifold, extending its service life. If you're doing it yourself, you'll need a jack and an oil filter wrench - the 14-flute 75mm size is the most suitable. Before replacement, start the engine and let it run for a few minutes to warm up the oil for better flow, but remember to wait 20 minutes after turning off the engine to avoid burns. When installing the new filter, first apply a layer of new oil to the rubber seal, hand-tighten it, then use the tool to give it an additional quarter turn - never use excessive force.

[LeRicardo]

The Boyue oil filter is located diagonally below the connection point between the engine block and oil pan, with a size slightly larger than a regular cup. I remember one winter when temperatures dropped below zero, the mechanic at the repair shop used a heat gun to warm the filter before unscrewing it, explaining that cold shrinkage would harden the sealing ring. During routine maintenance, I noticed this area is prone to mud splashes, so installing a dust cover is advisable. When purchasing filters, always verify the genuine part number 0986AF0065, as aftermarket parts may cause unstable oil pressure. For replacement, the gravity oil change method is recommended - after removing the filter, wait 20 minutes to allow complete drainage of old oil.