Where is the oil drain plug located on the Baojun 730?
3 Answers
The oil drain plug on the Baojun 730 is located on the oil pan. Fuel tank maintenance: Fuel tank maintenance mainly involves combining it with the vehicle's primary maintenance. Drain accumulated water and sediment from the tank, and check for oil leaks at pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, also check if the vent holes are clear. The fuel filler neck's filter screen should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. Precautions: Vehicle fuel tanks should generally be cleaned every three months. Excessive sediment in the tank can allow large amounts of impurities to enter fuel lines, accelerating filter contamination and clogging as well as wear on precision components, affecting engine performance. Regular removal of tank sediment and maintaining tank cleanliness is essential.
I've been driving my Baojun 730 for several years, and the oil drain plug location is actually quite easy to find—it's on the oil pan beneath the engine at the bottom of the car. Every time I change the oil, I have to drive the car onto a service pit or jack it up. When I look underneath, the plug is a hexagonal metal bolt fixed at the very center of the oil pan, near the front axle position. Before draining the oil, prepare an oil catch pan. Loosening the plug will release the oil, but remember there's a small washer on the plug—it tends to wear out with frequent oil changes, so it's best to have a new one ready. The location is well-designed, not too close to the edge to avoid interference with other components. If you're doing it yourself, remember to wear gloves to protect your hands from oil stains. The ground clearance is just enough to reach it, but safety comes first—never attempt this on a slope, as the car could slip. Regular oil changes keep the car running smoothly, and the plug must be tightened properly—I usually stop when I feel slight resistance.
I've been driving the Baojun 730 for quite some time now, and I'm very familiar with the oil drain plug location. It's positioned slightly towards the center at the rear of the oil pan - just crouch down to look underneath the car and you'll spot it. When changing oil, using a lift or pit with good lighting makes the job easier, but don't overtighten the plug or you'll struggle next time. The plug sits near the exhaust pipe, so beware of heat burns, and always replace the washer to prevent leaks. From my own experience, the plug tends to rust, so applying some anti-rust agent helps. During maintenance, check the undercarriage for scrapes too - excessive oil leakage can damage the engine. While the position is fixed, it's not very conspicuous, so beginners might want to mark the spot for convenience. Regular maintenance extends vehicle lifespan, and remember that oil quality affects the plug's sealing performance too.
