Where is the OBD port located on the Volkswagen Touran?

How to Navigate Through a Level Crossing Intersection?

Reduce speed in advance before reaching the intersection and pay attention to the traffic signals. If the yellow light is flashing or the red light is already on, slow down and stop without crossing the stop line, quickly shift into first gear, and proceed when the green light turns on after looking left and right to ensure safety. Even if the light is green when entering the intersection, still reduce speed in advance and confirm safety by looking left and right before proceeding. Below is a detailed introduction to level crossing intersections: 1. Definition: A level crossing intersection refers to a multi-road planar intersection, where roads intersect at the same level. Roads connect via intersections to form a road network, facilitating movement in all directions. 2. Main Purpose: The internal area design of intersections primarily aims to resolve conflicts between different traffic flows, providing clear passage space for various types of traffic, reducing conflicts, and enhancing safety. Key design elements include internal space channelization, such as non-motorized vehicle passage space design, pedestrian crossing design, traffic island design, guide lines, waiting zone design, and stop-and-yield line design.

17

0

Share

What to Do When Your Driver's License Reaches 12 Demerit Points?

If the driver's license is Class C, accumulating 12 demerit points at once requires retaking the subject one exam. After passing the exam, the driver's license can be reinstated. For Class A or B licenses, the penalties are more severe, involving not only retaking the exam but also a downgrade in license class. Below are specific details about driver's licenses: 1. Classification: According to the "Motor Vehicle Driver's License Business Work Standards" officially issued by the Ministry of Public Security, a graded system for motor vehicle driver's licenses has been introduced, dividing licenses into 15 classes: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. 2. Renewal Rules: If a motor vehicle driver does not accumulate 12 demerit points in any scoring cycle during the six-year validity period of the driver's license, they can renew it for a ten-year validity period. If they continue to avoid accumulating 12 demerit points in any scoring cycle during the ten-year validity period, they can renew it for a long-term valid driver's license.

20

3

Share

What is the normal RPM for a new car at startup?

New cars typically have a startup RPM around 1000. Since the new engine hasn't been broken in yet, the starting resistance is higher, resulting in a correspondingly lower startup RPM. After the engine has undergone proper break-in and maintenance, the coordination between moving parts reaches its optimal state, and the RPM may increase slightly. Below are some precautions for breaking in a new car: 1. Avoid overloading: During the break-in period, the vehicle's load should not exceed 75% of its rated capacity. New cars should be loaded below the specified weight and passenger limits, and overloading must be avoided. Overloading increases the burden on components such as the engine, transmission, drivetrain, and suspension system, accelerating wear. 2. Generally, domestic vehicles should not exceed 75% of their rated capacity, while imported vehicles should not exceed 90%. Additionally, to reduce the load on the body and powertrain, choose relatively flat road surfaces and avoid vibrations, impacts, or emergency braking. 3. During the break-in period, the gasoline used in a new car should not be of a lower grade than specified by the manufacturer. Do not add anti-wear oil additives, as this may result in insufficient break-in even after reaching the required mileage.

17

5

Share

Which region does the license plate 'Ping' belong to?

There is no vehicle license plate with the character 'Ping' in any region of our country. Here is some relevant information: 1. Vehicle license plates are standardized hard-number plates with a unified format and style, issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for license plates. These plates bear a unique registration code. The vehicle registration certificate, issued by the vehicle management authority, records the main details of the vehicle's initial registration. It is kept by the owner and carried in the vehicle as a standardized registration booklet for recording changes and inspections. According to the 'Road Traffic Management Regulations,' the vehicle license plate and registration certificate are the legal documents permitting a vehicle to operate on public roads. 2. Vehicle license plates are the abbreviated term for both the license plate and the vehicle registration certificate. The 'Urban and Highway Traffic Management Rules (Trial)' issued in 1972 renamed the registration certificate as the 'vehicle registration certificate.' Typically, a vehicle has two license plates, installed at specified positions on the front and rear of the vehicle. Vehicle license plates are the legal credentials allowing a vehicle to operate on roads, serving as proof for road traffic management departments, public security authorities, and the general public to monitor, identify, remember, and trace vehicle movements.

3

5

Share

What brand is Torch spark plug?

Torch spark plug is a product of the Torch brand, a domestic brand under Zhuzhou Torch Spark Plug Co., Ltd. Where is the spark plug located: The spark plug is installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables. Over the past decade, most car engines have been updated to connect the ignition coil directly to the spark plug. What are the effects of a faulty spark plug: If the spark plug is damaged, it can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the normal operation of the vehicle. Severe erosion of the spark plug, such as scarring at the top, damage, or melted and eroded electrodes, indicates that the spark plug is damaged and should be replaced. Steps to replace a spark plug: Open the hood and remove the engine's plastic cover. Disconnect the high-voltage ignition wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, ensuring to check for and clean any external debris like leaves or dust. Insert the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the correct firing order and reattach the cover.

2

0

Share

Why is there no traffic violation record found online three days after running a red light?

After running a red light, the notification message for illegal photo capture is usually received within 3 to 7 days, with the latest being around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. But this notification does not equate to a traffic violation; it merely serves as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For violations captured by surveillance cameras, vehicle owners generally do not receive violation messages immediately. There is a delay, and the duration varies. After an electronic camera captures a violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then verified by the relevant traffic police personnel. If confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. After receiving the violation SMS, the vehicle owner must go to the traffic police department where the violation occurred within one month before the annual vehicle inspection to address the violation. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received after 15 days, it is likely that no violation was recorded. Traffic violation query methods: Traffic violation queries refer to checking motor vehicle violations of traffic management through online platforms or query terminals. Methods include website queries, phone queries, SMS queries, and mobile app queries. Website query: You can search for "vehicle violation query" and input your vehicle information to check. Phone query: You can call local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location where they occurred or at the vehicle's license plate issuance location. For on-the-spot violations, such as those caught directly by a traffic officer, they must be handled at the violation location. SMS query: Open your phone's SMS interface, enter "WZ" followed by your license plate number and color, and send it to 1062650001. Mobile app query: Open the "Traffic Management 12123" app, select "violation query," and address any unresolved violations.

4

1

Share

Where is the OBD port located on the Volkswagen Touran?

How to Navigate Through a Level Crossing Intersection?

What to Do When Your Driver's License Reaches 12 Demerit Points?

What is the normal RPM for a new car at startup?

Which region does the license plate 'Ping' belong to?

What brand is Torch spark plug?

Why is there no traffic violation record found online three days after running a red light?

Are Position Lights the Same as Low Beams?

How to Remove the Center Console of the 10th Generation Accord?

What is the working principle of a cylinder head?

Where is the license plate with 'Qing' from?