···
Log in / Register

Where is the NIO car factory located?

1 Answers
OKate
07/29/25 1:47am

NIO's production base is located in Hefei. Below are some maintenance methods for car batteries: Actively turn off the lights: Remember to turn off the lights and audio system before turning off the engine. During driving, the lights are used most frequently. Additionally, some drivers enjoy playing music while driving, which increases the battery's power consumption to some extent. Therefore, drivers must ensure to turn off the lights and audio before parking and turning off the engine. Keeping them on for a long time will significantly increase the battery's load, which is very detrimental to its lifespan. Avoid long-term parking: Do not leave the car parked for extended periods. In daily life, avoid leaving the car unused for long durations, turning it into a "zombie car," as the battery's charge will gradually deplete over time. When you eventually need to use the car, it may be difficult to start. Therefore, even if you use the car infrequently, make sure to drive it out periodically to keep the battery charged and in optimal condition.

Was this review help?
19
0
Share
More Forum Discussions

What is the button on the back of the ETC device?

The button on the back of the ETC device is an anti-tamper button. When the vehicle owner installs the ETC device on the windshield, the button is pressed down. If the device is moved or removed without authorization, the pressed button will pop up, and all vehicle information recorded by the device will be reset to zero. In this case, the owner needs to bring the device and relevant documents to the ETC service center for reactivation. Precautions for using ETC: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, to prevent the ETC device of the preceding vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the preceding vehicle. The ETC lane recognition speed is 20 km/h. If the vehicle speed is too fast, the device information cannot be read, which may also lead to payment failure. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to become invalid. It can be sent to the bank where the ETC card was issued or the highway service office for inspection. If the detachment or loosening is not caused by human factors, it only needs to be reactivated. When using a debit card to bind ETC, insufficient balance may also cause payment failure. Follow the guidance of on-site staff to use the manual MTC lane and pass through by cash or card payment. If the vehicle's windshield is too thick, it may cause poor sensing. This is especially important for vehicles that have had their windshields replaced after an accident or for those who have modified their front windshields.
10
2
Share

What is the fuel consumption of the old 2.3L Mazda6?

2.3L Mazda6 old model has a fuel consumption of 12.5 liters per 100 kilometers. The following are the specific details of the 2.3L Mazda6 old model: 1. It is a sporty B-class sedan under Mazda. 2. It has a wheelbase of 2675 mm, and its length, width, and height are 4670 mm, 1780 mm, and 1435 mm respectively. 3. Its engine has a maximum power of 163 horsepower and a maximum torque of 204 Nm, with the maximum power speed at 6500 rpm and the maximum torque speed at 4000 rpm. 4. Its engine is equipped with multi-point fuel injection technology and uses aluminum alloy cylinder heads and blocks.
10
3
Share

Is there a big difference between Audi with and without quattro?

Audi with and without quattro does make a significant difference. The specific reasons are as follows: 1. quattro is a vehicle drive technology registered by Audi, which is a four-wheel drive system. 2. Four-wheel drive means that all four tires of the vehicle have driving force, combined with a purely mechanical central differential. 3. The four-wheel drive system ensures a more stable, efficient, and rapid driving experience. Note: Audi's quattro has evolved from full-time four-wheel drive to on-demand four-wheel drive, with almost no significant difference in road driving experience.
3
0
Share

How to adjust the date on a 2009 Sylphy?

Here are the steps to adjust the date on a 2009 Sylphy: 1. Insert the key into the ignition slot of the Dongfeng Nissan Sylphy to power on the vehicle; 2. There is a button on the lower left and right corners of the Sylphy's dashboard. Press the left button once. The left button is the selection button, pressing it once adjusts the hour; 3. Press the right button on the Sylphy's dashboard once. The right button is the adjustment button, pressing it once increases the value by one; 4. Press the left button on the Sylphy's dashboard twice. Pressing it twice adjusts the minutes; Below is some related information about the 2009 Sylphy: 1. The new Sylphy inherits Nissan's V-Motion 2.0 family design language, with a bold front grille that delivers a strong visual impact. 2. It adopts a more youthful design, showcasing a higher level of artistic beauty.
19
0
Share

Where is Chery produced?

Chery is produced in Wuhu City, Anhui Province. The models under Chery Automobile include: Arrizo 5, Tiggo 5x, Tiggo 3, Chery QQ, Little Ant, etc. Taking the 2021 Arrizo 5 as an example, its body dimensions are: length 4572mm, width 1825mm, height 1482mm, wheelbase 2670mm, minimum ground clearance 125mm, fuel tank capacity 48l. The 2021 Arrizo 5 is equipped with a 1.6l naturally aspirated engine, with a maximum power of 66kw and a maximum torque of 130nm, matched with a 5-speed manual transmission.
1
3
Share

What are the precursors to a Golf 7 transmission failure?

The precursors to a Golf 7 transmission failure include symptoms such as transmission oil leakage, engine idling without load, weak acceleration, jerking when engaging gears, gear shifting hesitation or jerking during driving, vibrations, and illuminated warning lights on the dashboard. The manifestations of a damaged car transmission are as follows: 1. Transmission oil leakage. Oil seeping from the transmission housing or oil pan can be caused by aging seals leading to poor sealing or manufacturing defects resulting in porosity in the housing. 2. Engine stalling, no response, or jerking when engaging a gear. A strong jerking sensation when engaging a gear is referred to as gear engagement shock. It's important to note that all automatic transmissions exhibit some degree of shock when engaging gears. If there is no sensation at all, it may indicate an internal fault. However, excessive shock is unacceptable. 3. Engine stalling when shifting into D or R. This issue may be caused by a damaged lock-up solenoid valve or a stuck lock-up control valve. After shifting into D or R and releasing the brake, the vehicle does not move. Alternatively, the car may drive a short distance after a cold start but fails to move when the engine is warm.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.