Where is the license plate with 'Yue Q' from?

2 Answers
LaVera
07/29/25 4:18pm
The license plate with 'Yue Q' is from Yangjiang City, Guangdong Province. The license plate numbers for Guangdong Province regions are as follows: 'Yue A' is Guangzhou, 'Yue B' is Shenzhen, 'Yue C' is Zhuhai, 'Yue D' is Shantou, 'Yue E' is Foshan, 'Yue F' is Shaoguan, 'Yue G' is Zhanjiang, 'Yue H' is Zhaoqing, 'Yue J' is Jiangmen, 'Yue K' is Maoming, 'Yue L' is Huizhou, 'Yue M' is Meizhou, 'Yue N' is Shanwei, 'Yue P' is Heyuan, 'Yue Q' is Yangjiang, 'Yue R' is Qingyuan, 'Yue S' is Dongguan, 'Yue T' is Zhongshan, 'Yue U' is Chaozhou, 'Yue V' is Jieyang, 'Yue W' is Yunfu, 'Yue X' is Shunde, 'Yue Y' is Nanhai. Yangjiang City is located on the southwestern coast of Guangdong Province, currently administering Jiangcheng District and two counties, Yangdong County and Yangxi County. It borders Luoding City and Xinxing County of Yunfu City to the north, Gaozhou City and Dianbai County of Maoming City to the west, and the South China Sea to the south.
Was this review help?
11
0
Share
LeilaniMarie
08/14/25 5:01am
As a seasoned driver with over a decade of experience, I often spot Yue Q license plates on the road, which are exclusively assigned to Qingyuan City in Guangdong Province. I've visited Qingyuan many times—it's located northwest of the Pearl River Delta, known for its picturesque landscapes, famous rafting spots, and hot springs. China's license plate system is straightforward: the first Chinese character is the provincial abbreviation ('Yue' for Guangdong), and the letter Q is designated to Qingyuan City, just like Yue A represents Guangzhou. This system is well-designed for traffic management, helping police quickly identify out-of-town vehicles and allowing drivers like us to assess road risks in advance. Last year, I met a Yue Q car owner at a highway rest stop—a local from Qingyuan who passionately shared about their hometown delicacy, bamboo tube rice. License plates offer an indirect glimpse into regional characteristics, and I recommend new drivers memorize these basics for a more confident driving experience.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

How to Replace the Fuel Filter in a Superb?

Superb fuel filter replacement method is: 1. Remove the vehicle key and disconnect the fuel pump fuse or vehicle power supply; 2. Remove the rear seat cushion and the cover on the fuel pump; 3. After disconnecting the wiring harness and fuel lines on the fuel pump, use special tools to remove the retaining ring, take out the fuel pump assembly, and replace the old part with a new fuel filter component; 4. Reinstall the fuel pump assembly with the new filter back into the fuel tank. The Superb is equipped with a three-spoke sporty multifunction flat-bottom steering wheel, 10-color ambient lighting system, and touch-sensitive air conditioning control panel, with dimensions of 4869mm in length, 1865mm in width, 1489mm in height, and a wheelbase of 2841mm.
14
0
Share

How to Quickly Register a Vehicle Without a Residence Permit?

To quickly register a vehicle without a residence permit, note that non-local residents must present both their ID card and a local residence permit when purchasing and registering a car in the area. Without a residence permit, the vehicle registration process cannot be completed. The steps for new vehicle registration are as follows: 1. Purchase insurance; 2. Pay the vehicle purchase tax; 3. Undergo criminal investigation inspection; 4. Submit required documents; 5. Drive the vehicle to the inspection area and hand over all processed documents to the inspection staff, then wait for traffic police to inspect the vehicle. During inspection, the engine hood must be opened to verify that the VIN and engine number on the documents match the actual vehicle; 6. After passing the inspection, submit all documents to the document collection window in the registration hall and wait for staff verification; 7. Upon successful registration, you will receive the vehicle license, registration certificate, and compliance label.
10
2
Share

What are the functions of the buttons inside the car?

The functions of the buttons inside the car include: 1. Fuel tank opening button: This button is used to remotely open the fuel tank cap from inside the car. Vehicles equipped with this button allow the driver to open the fuel tank cap from inside the car; 2. ESP switch: This is used to turn the vehicle's ESP on or off. The vehicle's ESP system is set to the working state by default; 3. Reverse radar button: This is used to turn the vehicle's reverse radar system on or off as needed by the owner. The driver can press this button to manually control the operation of the reverse radar; 4. Central locking button: This is the control button for the vehicle's central door lock. The owner can press this button to simultaneously open or close the door locks of all doors.
9
5
Share

How to Steer the Wheel During a Turn in Subject Three?

The method for steering the wheel during a turn in Subject Three is: 1. Turn on the left turn signal in advance. When making a wide left turn, after the vehicle crosses the stop line, steer 15 degrees to the left, being careful not to turn too early to avoid the left rear wheel running over the solid line; 2. When reaching the center of the road, increase the steering angle to align the front of the vehicle with the intended lane, then quickly straighten the wheel and turn off the turn signal; 3. For sharp left turns or U-turns, the steering method is similar to the right-angle turn in Subject Two. When half of the vehicle has passed the stop line, you can turn the wheel fully to the left, observe the road ahead to choose the lane to enter, and finally straighten the wheel.
9
0
Share

What documents are needed to replace an ETC card?

To replace an ETC card, you need to bring the new vehicle's registration certificate, driver's license, the bank card bound to the ETC, and the ETC pass card to the corresponding bank or ETC management department to apply for the change of registration. ETC installation method: Sensor installation. ETC devices are uniformly installed on the inside of the car's front windshield, next to the rearview mirror. They come with plastic suction cups to attach to the windshield. Choose a suitable installation location that does not obstruct the driver's front view. Sensor wiring installation. Plug the sensor's wiring connector into the sensor's interface. The wiring is connected through the car's internal network, branching out from the vehicle's intelligent information system. The wiring can be tucked under the car's headliner without removing any interior panels—simply press it into place to hide the wires neatly. Insert the card into the ETC sensor. Gently insert the side of the card with the chip into the ETC sensor's card slot. The sensor detects the chip and reads the express pass card. If the card is inserted correctly, the sensor's display will light up and show "Start Billing," indicating a successful connection between the sensor and the express pass card. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile app (usually with a download QR code on the electronic tag), then enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
14
4
Share

How to Replace the Front Headlight Bulb of the Excelle?

The method to replace the front headlight bulb of the Excelle is as follows: The outermost part of the Excelle's headlight is the position light, the middle is the low beam, and the innermost is the high beam. To replace the bulb, simply open the engine hood, locate the bulb you wish to replace, rotate the lamp cover counterclockwise, and then you can remove the lamp holder and directly replace the bulb. In terms of power, the Excelle is equipped with a well-tuned 1.5L engine with a maximum power output of 113 kW, paired with a 6AT transmission. For the interior, the car's dashboard features a wraparound design, making it convenient for the driver to operate during the driving process.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.