···
Log in / Register

Where is the LaCrosse's cabin air filter located?

3 Answers
StArianna
09/06/25 6:08am
The LaCrosse's cabin air filter is located inside the glove compartment on the passenger side. The replacement method is: first remove the glove box, then open the cover on the cabin air filter housing to replace it. The LaCrosse is a mid-size sedan under SAIC-GM Buick. Taking the 2021 LaCrosse 552T Luxury model as an example, its body dimensions are: length 5026mm, width 1866mm, height 1459mm, with a wheelbase of 2905mm and a fuel tank capacity of 55 liters. The 2021 LaCrosse 552T Luxury model is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering maximum horsepower of 169hp, maximum power of 124kW, and maximum power speed of 5600rpm.
Was this review help?
11
1
Share
LillianAnn
09/18/25 5:52am
I've been driving the Buick LaCrosse for several years, and the cabin air filter is located inside the glove compartment on the passenger side. First, you need to open the glove box door, then there are several clips or screws securing the compartment on both sides. Loosen or remove them to take out the entire glove box. Behind it, you'll find a long plastic cover; gently pry it open to reveal the cabin air filter hidden inside. This design makes maintenance quite convenient. I replace it every two years to prevent air pollution inside the car, as a clogged filter can cause unpleasant odors and increase fuel consumption. Changing the filter yourself is straightforward—buying OEM parts online for just a few dozen yuan saves hassle. Remember to check the directional arrow to avoid installing it backward. If the glove box is hard to remove, it might be due to aged clips in older cars—apply gentle force to avoid damaging the plastic parts. Maintaining regular replacement ensures fresh and safe air while driving.
Was this review help?
5
2
Share
Expand All
DaniellaDella
11/01/25 6:18am
As an ordinary car owner, I find that the LaCrosse's cabin air filter is not hard to locate. It's inside the passenger side glove compartment. When you open the glove box, you'll see a small cover panel at the bottom or side - the filter sits behind it. I recommend regular replacement, say every 20,000 kilometers, to prevent dust inhalation that may trigger rhinitis. For DIY replacement, just purchase a compatible filter from auto parts stores and install it carefully (ensure correct orientation). Its position near air vents makes it prone to dust accumulation, which can impair cooling efficiency - forgetting to change it may result in slower AC performance and higher power consumption. Nowadays many video tutorials demonstrate this maintenance procedure, helping you avoid mechanic fees. After replacement, you'll notice significantly improved cabin air quality for a more comfortable driving experience.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What kind of car is the Mercedes-Benz Sprinter?

Mercedes-Benz Sprinter is a large MPV launched by Mercedes-Benz in 2003. The Sprinter features a grand and stylish exterior design. In terms of interior configuration, it is equipped with high-end amenities such as massage seats, in-car DVD players, flat-screen TVs, along with ABS, BAS, and ASR systems, significantly enhancing its safety rating. Below is more detailed information about the Mercedes-Benz Sprinter: 1. Dimensions: The Mercedes-Benz Sprinter measures 5910 mm in length, 1993 mm in width, and 2535 mm in height, making it a cost-effective 7-seater MPV. 2. Exterior: The Mercedes-Benz Sprinter maintains its distinctive characteristics, featuring a tall 2.6-meter-high body, a forward-protruding front end, a simple horizontal radiator grille with the prominent three-pointed star emblem in the center, and stylish streamlined integrated front headlights that are crystal clear. 3. Powertrain: The Mercedes-Benz Sprinter is powered by a 3.5-liter electronically controlled direct-injection gasoline V6 engine, delivering outstanding acceleration and traction performance. The Sprinter boasts a maximum power output of 180 kW, 258 horsepower, and a peak torque of 340 Nm, with a top speed of 161 km/h.
19
2
Share

Which city does the license plate starting with Lu C belong to?

License plates starting with Lu C belong to Zibo City, Shandong Province. A license plate is a number plate that identifies a vehicle, much like an ID card does for a person. License plate colors and classifications: License plates come in white, blue, yellow, and black. 1. White represents military or police plates. For example, GK12001 represents the Guangzhou Military District, and Zhe A1063 Police represents a vehicle from the Hangzhou Public Security Bureau. 2. Blue represents ordinary small vehicles. 3. Yellow represents ordinary large vehicles. 4. Black represents vehicles used by foreign investors in China or important figures.
17
5
Share

What are the methods for carbon deposit removal?

Methods for carbon deposit removal are as follows: 1. Throttle carbon deposits: Remove the throttle body, clean both sides with carburetor cleaner, then wipe off the decomposed carbon deposits with a cloth. 2. Engine internal carbon deposits: These mainly appear on intake/exhaust valves and piston tops in the combustion chamber. Use specialized equipment to inject cleaning agents into the combustion chamber, allow sufficient chemical reaction time, then extract the waste liquid. Note: For severe carbon buildup cases, disassembly cleaning is recommended - removing intake manifolds and engine cylinder heads for thorough engine cleaning.
13
3
Share

Has the Phaeton been discontinued?

The Phaeton was discontinued in 2016. Reasons for the discontinuation of the Phaeton: 1. Low production volume and poor sales. Due to high technical requirements, production was limited, and low sales led to massive losses. The profit per vehicle was negative at €28,100 (approximately ¥205,000 RMB), with a loss rate as high as 40%. Since its mass production in 2002, the Phaeton alone caused a cumulative loss of €2 billion (approximately ¥14.59 billion RMB) for the Volkswagen Group. 2. Poor sales and severe losses resulted in slow updates, with the model being sold for 13 years. Moreover, competitors like the Mercedes-Benz S-Class, BMW 7 Series, and Audi A8L had superior performance, making the Phaeton less competitive in its class. 3. Impacted by Volkswagen's 'Dieselgate' scandal and the resulting massive fines. 4. Ferdinand Piëch, former Chairman of the Volkswagen Group Supervisory Board, resigned from his position.
18
3
Share

What is the Scrap Life of Automotive Gas Cylinders?

For liquefied petroleum gas (LPG) cylinders with a designed service life of 8 years, an extension of the service period is permitted after a safety assessment, but only once, and the extension must not exceed one inspection cycle of the cylinder. For LPG cylinders without a specified designed service life, those that have been in use for 15 years should be scrapped and rendered unusable. Below are the relevant details: 1. Automotive LPG cylinders: Inspect every 5 years, with the first periodic inspection date calculated from the manufacturing date. 2. Automotive dimethyl ether (DME) cylinders: Inspect every 5 years, with the first periodic inspection date generally calculated from the installation supervision inspection date. 3. Automotive fiber-wrapped gas cylinders: Inspect every 3 years, with the first periodic inspection date generally calculated from the installation supervision inspection date. 4. Automotive compressed natural gas (CNG) cylinders: The first and second periodic inspections are conducted every 3 years, and after the second inspection, inspections are conducted every 2 years. For taxi cylinders, the first periodic inspection is conducted every 2 years, and the second inspection is valid for 1 year. The first periodic inspection date is generally calculated from the installation supervision inspection date. 5. Automotive welded insulated gas cylinders: Inspect every 3 years, with the first periodic inspection date generally calculated from the installation supervision inspection date.
13
4
Share

Where to Obtain the Environmental Label?

The steps to obtain the environmental label are as follows: 1. Vehicle owners can directly bring the original vehicle license and the original vehicle registration certificate to the nearest motor vehicle environmental inspection agency to apply for free. The specific procedure is: the applicant submits the required documents at the designated window, after which the issuing personnel will review and approve the application. The classification label will then be issued and printed by the issuing personnel, who will also fill out the issuance registration form. Finally, the applicant can collect the label and retrieve the original valid documents. 2. For in-use motor vehicles, the owner needs to drive the vehicle and bring the original vehicle license to the inspection station. The applicant must fill out the 'Motor Vehicle Environmental Classification Label Technical Identification Application and Review Form' (which can be downloaded and printed from the municipal environmental protection bureau's website), submit the aforementioned valid documents, and after the vehicle passes the technical identification review, the environmental classification label can be obtained.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.