Where is the keyhole of Zotye T600?

2 Answers
McJayla
07/24/25 3:46am
Zotye T600 is a car with one-button start, so there is no keyhole. There is only a keyhole on the driver's door. Nowadays, many cars have the one-button start function, which was originally applied to racing cars and later introduced to civilian vehicles. One-button start is very convenient, as the owner no longer needs to turn a key to start the engine. Here is some additional information: 1. Keyless entry function: Some cars also have a keyless entry function. The owner only needs to carry the car key with them and press the button on the door handle to unlock the door. After getting in the car, pressing the one-button start button will start the engine and allow the car to be driven away. 2. Improved owner's experience: Cars with one-button start and keyless entry allow the owner to unlock the door, get in the car, and start the engine without ever taking out the key, greatly enhancing the owner's driving experience.
Was this review help?
4
1
Share
LaKatherine
08/10/25 11:19pm
When I first bought the car, I was quite confused about where the Zotye T600's ignition keyhole was. Actually, it's on the right-side column near the steering wheel—there's a small hole to insert the key for starting. The position is close to the instrument panel, and you can easily reach it. There's also a keyhole on the door, but that's for unlocking, so don't mix them up. To start the car, you need to press the brake pedal and gently turn the key. I remember the first time I couldn't find it, I panicked, but later I checked the manual and figured it out. Before driving, adjust your seat and locate it—don’t fumble around like I did. Another tip: if the car won’t start, it might be due to a dead key battery or the key getting stuck. Occasionally, apply some silicone oil to lubricate the keyhole to prevent rust. Overall, the design is quite user-friendly.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What Causes Oil Leakage in Motorcycle Carburetors?

Motorcycle carburetor oil leakage can be attributed to the following reasons: Foreign matter adhering to the contact surface between the needle valve and valve seat: The needle valve and valve seat control the fuel intake and require strict sealing, with high surface smoothness. If foreign matter adheres to the contact surface, it will cause poor sealing between the needle valve and valve seat, resulting in oil leakage. Foreign matter mainly refers to impurities and condensed gum in gasoline. To prevent such faults, users should pay attention to regularly cleaning the gasoline filter and using high-quality gasoline. Needle valve wear: During use, the needle valve wears due to long-term erosion by impurities in gasoline and contact with the valve seat; uneven adjustment at both ends of the float causes the needle valve to bear lateral force and wear. Needle valve wear leads to poor sealing with the valve seat, resulting in oil leakage.
8
3
Share

How to Properly Use Lights When Driving in Foggy Conditions?

Methods for correctly using lights when driving in foggy conditions: 1. Turn on both front and rear fog lights; 2. Activate the hazard warning lights (double flashing lights); 3. When visibility is poor, also turn on the low beam headlights. Precautions for driving in foggy conditions: 1. Use vehicle lights appropriately in heavy fog; 2. Pay attention to speed limits; 3. Apply brakes frequently and gently during driving; 4. Use the horn often; 5. Be mindful of the choice of driving route; 6. Pull over to the side of the road when necessary; 7. Utilize defogging techniques for the front windshield; 8. If stranded due to heavy fog, wait until visibility is fully restored before driving. The main purpose of turning on fog lights and hazard warning lights is to make it easier for other drivers to notice your vehicle, thereby avoiding rear-end collisions and side-swipe accidents.
15
0
Share

How many liters of engine oil does the Mercedes-Benz GLC260 require?

Mercedes-Benz GLC260 should be filled with 7 liters of engine oil. The Mercedes-Benz GLC260 is a mid-size luxury SUV under the Mercedes-Benz brand. The GLC series utilizes two types of engines: 1. A low-power version of the 2.0-liter turbocharged engine. This engine delivers 197 horsepower and a maximum torque of 320 Nm, with the maximum power achieved at 6100 rpm and peak torque available between 1650 to 4000 rpm. It features direct fuel injection technology and employs an aluminum alloy cylinder head and block. This engine is paired with a 9-speed automatic transmission (9AT). 2. A high-power version of the 2.0-liter turbocharged engine. This engine reaches its maximum power at 6100 rpm and generates peak torque between 1800 to 4000 rpm. Similarly, it incorporates direct fuel injection and uses an aluminum alloy cylinder head and block, also mated to a 9AT transmission.
6
0
Share

Why is the engine light on and the transmission also having problems?

The reasons for the engine light being on and the transmission also having problems are as follows: Sensor issues: Including water temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine fault light to come on. Maintenance issues: Poor engine maintenance is the most common cause of the engine fault light coming on. If the owner does not perform regular maintenance and has poor driving habits, it will increase the burden on the engine's operation. Oil quality issues: The oil quality mentioned here includes fuel and engine oil. If the owner does not add gasoline as required, it will cause engine wear over time.
19
5
Share

How to Use the S Gear in Focus?

S gear is the sport mode of the car. Below is the relevant introduction about the Focus gear positions: 1. In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer time. This allows the car to travel at low gear and high RPM for an extended period, thereby achieving greater torque output and acceleration. 2. S gear only delays upshifting without changing other working aspects. In the short term, the transmission load increases, and the temperature rises accordingly, leading to increased wear. Therefore, try not to use S gear for extended periods. In terms of fuel consumption, because the fuel injection volume increases at high RPM, the fuel consumption in S gear mode is much higher than in normal mode. 3. For cars that frequently drive in congested urban areas, the engine tends to accumulate more carbon deposits. Therefore, using S gear appropriately at regular intervals helps remove carbon deposits in the engine, improve fuel economy, and extend engine life.
14
2
Share

What is the tire size of the ix35?

The ix35 has two tire sizes: 225/60R17 and 215/70R16. The 225/60R17 represents a tire width of 225 millimeters, an aspect ratio of 60, 'R' indicating radial construction, and '17' meaning it can be mounted on 17-inch rims. The 215/70R16 represents a tire width of 215 millimeters, an aspect ratio of 70, 'R' indicating radial construction, and '16' meaning it can be mounted on 16-inch rims. The ix35 is an SUV model under Beijing Hyundai, offering two engine options: 2.0-liter and 2.4-liter. Both engines are the new Theta II dual CVVT all-aluminum four-cylinder gasoline engines. The 2.0-liter engine has a maximum output of 120 kW and a maximum torque of 194 Nm, while the 2.4-liter engine has a maximum output of 128 kW and a maximum torque of 226 Nm.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.